• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.9
• /
• pp.5434-5439
• /
• 2014

The surface management of metals was performed with a tool microscope or surface roughness measurement instruments. These methods were not efficient for checking the surface status of the die in the production field. For this reason, an analysis system or measurement system to monitor the wear, defects and surface status as a die ages is required. This study, developed surface analysis software for automatic analysis and standardization of a die or processed products. Software was designed to measure the basic features, such as circles, dots, and lines. The captured images were rendered as three-dimensional representations so that the depth of the grooves on the die and segmental profiles could be estimated. As a result of experimental analysis, the surface roughness was measured with an accuracy more than 93.2%, and the maximum deviation in the surface roughness for the brightness of the lighting was within $3{\mu}m$. The confidence in the device's precision was assured. These results show quality control through efficient surface analysis.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.1
• /
• pp.210-216
• /
• 2014

The edge in the image is a part which the brightness changes rapidly between the object and the object or objects and background, and includes information of the features such as size, position, orientation, and texture of the object. The edge detection is the technique that acquires these information of the images, and now the researches to detect edges are making steady progress. Typical conventional edge detection methods are Sobel, Prewitt, Roberts using the first derivative operator and Laplacian method using the second derivative operator and so on. These methods is more or less insufficient that the characteristics of the edge detection in the image added salt and pepper noise. therefore, in this paper, an edge detection algorithm using modified mask that applies different size mask according to noise density of local mask is proposed.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.3
• /
• pp.241-246
• /
• 2016

Nowadays many people have an interest in facial expression and the behavior of people. These are human-robot interaction (HRI) researchers utilize digital image processing, pattern recognition and machine learning for their studies. Facial feature point detector algorithms are very important for face recognition, gaze tracking, expression, and emotion recognition. In this paper, a cascade facial feature point detector is used for finding facial feature points such as the eyes, nose and mouth. However, the detector has difficulty extracting the feature points from several images, because images have different conditions such as size, color, brightness, etc. Therefore, in this paper, we propose an algorithm using a modified cascade facial feature point detector using a convolutional neural network. The structure of the convolution neural network is based on LeNet-5 of Yann LeCun. For input data of the convolutional neural network, outputs from a cascade facial feature point detector that have color and gray images were used. The images were resized to $32{\times}32$. In addition, the gray images were made into the YUV format. The gray and color images are the basis for the convolution neural network. Then, we classified about 1,200 testing images that show subjects. This research found that the proposed method is more accurate than a cascade facial feature point detector, because the algorithm provides modified results from the cascade facial feature point detector.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.5
• /
• pp.431-437
• /
• 2006

In this paper vector code correlation(VCC) method and an algorithm to promote the image-processing performance in building an effective measurement system using cameras are described far automatically berthing and controlling the ship equipped with side-thrusters. In order to realize automatic ship berthing, it is indispensable that the berthing assistant system on the ship should continuously trace a target in the berth to measure the distance to the target and the ship attitude, such that we can make the ship move to the specified location. The considered system is made up of 4 apparatuses compounded from a CCD camera, a camera direction controller, a popular PC with a built-in image processing board and a signal conversion unit connected to parallel port of the PC. The object of this paper is to reduce the image-processing time so that the berthing system is able to ensure the safety schedule against risks during approaching to the berth. It could be achieved by composing the vector code image to utilize the gradient of an approximated plane found with the brightness of pixels forming a certain region in an image and verifying the effectiveness on a commonly used PC. From experimental results, it is clear that the proposed method can be applied to the measurement system for automatic ship berthing and has the image-processing time of fourfold as compared with the typical template matching method.

• Polymer(Korea)
• /
• v.24 no.1
• /
• pp.90-96
• /
• 2000

Organic electroluminescent (EL) device was fabricated with Alq$_3$ as an emitting material and PDPMA ultra thin film prepared by Langmuir-Boldgett technique as a polymer hole transport layer. A stable condensed PDPMA monolayer was obtained using arachidic acid as a surface active material. The thickness and absorbance of PDPMA LB film increased line-arly with the layer numbers. The organic multilayered device consisted of ITO/PDPMA LB film (19 layers)/Alq$_3$/Al emitted green light with brightness of 2500 cd/m$^2$ at a DC 14 V Especially, the drive voltage of EL device having PDPMA LB film of 15 layers exhibited the value as low as 4 V. The effects of thickness control and molecular orientation in the PDPMA LB film on EL performance were discussed.

• The Journal of the Korea Contents Association
• /
• v.7 no.1
• /
• pp.116-123
• /
• 2007

This paper proposed a new amplitude width modulation for OLED data driver IC. The data driver controls brightness of OLED by adjusting amplitude and width of the data drive current pulse. There were two conventional methods; pulse amplitude modulation(PAM) and pulse width modulation(PWM). The PWM method suffered from lower light emitting time efficiency at low luminance signal. The PAM method suffered from large chip area using DACs for each column. The proposed method was aiming at accurately controlling of the current level by MSB data and light emitting efficiency by LSB data to improve the inefficiencies of the PAM and a PWM. The proposed AWM driver circuit implemented using $0.35-{\mu}m$ 3-poly 4-metal CMOS high voltage process. The simulation result shows the improvement in the accuracy of the gray level control even though the driver circuit is smaller than the PAM.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.602-604
• /
• 2016

In this paper, we propose that it can control the interior lighting, LED and alarm clocks based on Bluetooth. The proposed 'Bluetooth based LED Alarm Lamp'may be an ON / OFF by using a Bluetooth module, by the light sensor and voltage transformers were designed to adjust the ON / OFF and light intensity. Also 7-segment display the clock, it was used a piezo-buzzer that designed to ring an alarm in time. And to decrease the voltage by using the touch sensor can adjust the light brightness. It was also added the ability to align the alarm. This piece (Bluetooth based LED Alarm Lamp) can provide a comfortable environment inside the room of a resident if the environment is dark when voltage is maintained to be ON automatic system. And designed with emphasis being able to improve the quality of sleep due to weak light.

• Journal of IKEEE
• /
• v.25 no.3
• /
• pp.485-492
• /
• 2021

In this paper, we propose the development of a defect inspection system for polygonal containers. Embedded board consists of main part, communication part, input/output part, etc. The main unit is a main arithmetic unit, and the operating system that drives the embedded board is ported to control input/output for external communication, sensors and control. The input/output unit converts the electrical signals of the sensors installed in the field into digital and transmits them to the main module and plays the role of controlling the external stepper motor. The communication unit performs a role of setting an image capturing camera trigger and driving setting of the control device. The input/output unit converts the electrical signals of the control switches and sensors into digital and transmits them to the main module. In the input circuit for receiving the pulse input related to the operation mode, etc., a photocoupler is designed for each input port in order to minimize the interference of external noise. In order to objectively evaluate the accuracy of the development of the proposed polygonal container defect inspection system, comparison with other machine vision inspection systems is required, but it is impossible because there is currently no machine vision inspection system for polygonal containers. Therefore, by measuring the operation timing with an oscilloscope, it was confirmed that waveforms such as Test Time, One Angle Pulse Value, One Pulse Time, Camera Trigger Pulse, and BLU brightness control were accurately output.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.6
• /
• pp.169-180
• /
• 2018

White light-emitting diodes (LEDs) are more economical than fluorescent lights, and provide high brightness, a high lifetime expectancy, and greater durability. As LEDs are closely connected with people's daily lives, dimming control of LED is an important component in providing energy savings and improving quality of life. In visible light communications systems using these LEDs, multiple input multiple output (MIMO) technology has attracted a lot of attention, in that it can attain the channel capacity in proportion to the number of antennas. This paper analyzes the power performance of three kinds of modulation in visible light communications (VLC) systems applied space-time block code (STBC) techniques. The modulation schemes are return-to-zero on-off keying (RZ-OOK), variable pulse position modulation (VPPM), and overlapping pulse position modulation (OPPM), and dimming control was applied. The power requirements and power consumption were used as metrics to compare the power efficiency in $2{\times}2$ STBC-VLC environments under the three kinds of modulation. We confirm that dimming control affects the communications performance of each modulation scheme. VPPM showed greater consumption among the three modulations, and OPPM showed energy savings comparable to VPPM.

• Korean Journal of Food Science and Technology
• /
• v.42 no.3
• /
• pp.368-372
• /
• 2010

Changes in the quality characteristics of muskmelon were analyzed by treating samples with 500, 1,000, and 1,500 ppb 1-MCP every 4 days and then storing the samples at $10^{\circ}C$. The weight losses of the MCP treated samples were lower than those of the control, while there were no differences in the concentrations among treatments. The firmness was maintained at a higher value in 1-MCP treated samples than the control during the storage period and showed the highest value in the 1,000 ppb treatment. The L-values (brightness of samples) in the 500 and 1,000 ppb treatments were kept constant during the storage period, while that of the control showed a decreasing trend after four days of storage. The bvalues and yellowness, were decreased after showing an increasing trend in both treatments and the control as the storage period passed. The respiration rates of 1-MCP treated samples were lower than the control, with the lowest value being observed in the 1,000 ppb treatment. The texture observed upon sensory evaluation was higher and freshness was maintained longer in the 1,000 ppb treatment. Therefore, 1,000 ppb 1-MCP was considered to be the most effective concentration for treatment of muskmelon.