• Korean Journal of Remote Sensing
• /
• v.37 no.6_3
• /
• pp.1985-1999
• /
• 2021

The purpose of this study is to apply urban heat island reduction techniques(green roof, cool roof, and cool pavements using heat insulation paint or blocks) recommended by the Environmental Protection Agency (EPA) to our study area and determine their actual effects through a comparative analysis between land cover objects. To this end, the area of Mugye-ri, Jangyu-myeon, Gimhae, Gyeongsangnam-do was selected as a study area, and measurements were taken using a drone DJI Matrice 300 RTK, which was equipped with a thermal infrared sensor FLIR Vue Pro R and a visible spectrum sensor H20T 1/2.3" CMOS, 12 MP. A total of nine heat maps, land cover objects (711) as a control group, and heat island reduction technique-applied land covering objects (180) were extracted every 1 hour and 30 minutes from 7:15 am to 7:15 pm on July 27. After calculating the effect values for each of the 180 objects extracted, the effects of each technique were integrated. Through the analysis based on daytime hours, the effect of reducing heat islands was found to be 4.71℃ for cool roof; 3.40℃ for green roof; and 0.43℃ and -0.85℃ for cool pavements using heat insulation paint and blocks, respectively. Comparing the effect by time period, it was found that the heat island reduction effect of the techniques was highest at 13:00, which is near the culmination hour, on the imaging date. Between 13:00 and 14:30, the efficiency of temperature reduction changed, with -8.19℃ for cool roof, -5.56℃ for green roof, and -1.78℃ and -1.57℃ for cool pavements using heat insulation paint and blocks, respectively. This study was a case study that verified the effects of urban heat island reduction techniques through the use of high-resolution images taken with drones. In the future, it is considered that it will be possible to present case studies that directly utilize micro-satellites with high-precision spatial resolution.

• Journal of Life Science
• /
• v.31 no.1
• /
• pp.90-99
• /
• 2021

In this study, to reduce the production cost of poly(3-hydroxyalkanoates) (PHA), optimal cell growth and PHA biosynthesis conditions of the isolated strain Pseudomonas sp. EML8 were established using waste frying oil (WFO) as the cheap carbon source. Gas chromatography (GC) and GC mass spectrometry analysis of the medium-chain-length PHA (mcl-PHAWFO) obtained by Pseudomonas sp. EML8 of WFO indicated that it was composed of 7.28 mol% 3-hydrxoyhexanoate, 39.04 mol% 3-hydroxyoctanoate, 37.11 mol% 3-hydroxydecanoate, and 16.58 mol% 3-hydroxvdodecanoate monomers. When Pseudomonas sp. EML8 were culture in flask, the maximum dry cell weight (DCW) and the mcl-PHAWFO yield (g/l) were showed under WFO (20 g/l), (NH4)2SO4 (0.5 g/l), pH 7, and 25℃ culture conditions. Based on this, the highest DCW, mcl-PHAWFO content, and mcl-PHAWFO yield from 3-l-jar fermentation was obtained after 48 hr. Similar results were obtained using 20 g/l of fresh frying oil (FFO) as a control carbon source. In this case, the DCW, the mcl-PHAFFO content, and the mcl-PHAFFO yields were 2.7 g/l, 62 wt%, and 1.6 g/l, respectively. Gel permeation chromatography analysis confirmed the average molecular weight of the mcl-PHAWFO and mcl-PHAFFO to be between 165-175 kDa. Thermogravimetric analysis showed decomposition temperature values of 260℃ and 274.7℃ for mcl-PHAWFO and mcl-PHAFFO, respectively. In conclusion, Pseudomonas sp. EML8 and WFO could be suggested as a new candidate and substrate for the industrial production of PHA.

• Food Science and Industry
• /
• v.55 no.2
• /
• pp.188-202
• /
• 2022

In the insect industry, as the scope of application of insects is expanded from pet insects and natural enemies to feed, edible and medicinal insects, the demand for quality control of insect raw materials is increasing, and interest in securing the safety of insect products is increasing. In the process of expanding the industrial scale, controlling the temperature and humidity and air quality in the insect breeding room and preventing the spread of pathogens and other pollutants are important success factors. It requires a controlled environment under the operating system. European commercial insect breeding facilities have attracted considerable investor interest, and insect companies are building large-scale production facilities, which became possible after the EU approved the use of insect protein as feedstock for fish farming in July 2017. Other fields, such as food and medicine, have also accelerated the application of cutting-edge technology. In the future, the global insect industry will purchase eggs or small larvae from suppliers and a system that focuses on the larval fattening, i.e., production raw material, until the insects mature, and a system that handles the entire production process from egg laying, harvesting, and initial pre-treatment of larvae., increasingly subdivided into large-scale production systems that cover all stages of insect larvae production and further processing steps such as milling, fat removal and protein or fat fractionation. In Korea, research and development of insect smart factory farms using artificial intelligence and ICT is accelerating, so insects can be used as carbon-free materials in secondary industries such as natural plastics or natural molding materials as well as existing feed and food. A Korean-style customized breeding system for shortening the breeding period or enhancing functionality is expected to be developed soon.

• Microbiology and Biotechnology Letters
• /
• v.37 no.2
• /
• pp.99-104
• /
• 2009

The $\beta$-glucosidase gene from Streptomyces coelicolor A3(2) was cloned and expressed in Escherichia coli. The ORF consisted of 1377 nucleotides encoding 51 kDa in a predicted molecular weight. Effects of pH indicated that the $\beta$-glucosidase showed similar activity using $\alpha$-pNPG($\rho$-nitrophenyl-$\alpha$-D-glucopyranoside), $\beta$-pNPG($\rho$-nitrophenyl-$\beta$-D-glucopyranoside), and $\beta$-pNPF($\rho$-nitrophenyl-$\beta$-D-fucopyranoside) at range of pH 3 to 10, and high activity using $\beta$-pNPGA ($\rho$-nitrophenyl-$\beta$-D-galactopyranoside) from pH 5 to 10, especially, 3.3 times higher activity at pH 9. Effects of temperature indicated that the $\beta$-glucosidase showed low activity using $\alpha$-pNPG, $\beta$-pNPG, and $\beta$-pNPF from $20^{\circ}C$ to $70^{\circ}C$, and increased activity using $\beta$-pNPGA from $30^{\circ}C$ to $50^{\circ}C$, 1.8 times higher activity at $50^{\circ}C$ than at $30^{\circ}C$. According to activity determination of other substrates, the enzyme was active on daidzin, genistin, and glycitin, inactive on esculin and apigenin-7-glucose. The EDTA and DTT as reducing agents inhibited $\beta$-glucosidase activity, but SDS and mercaptoethanol did not inhibit. Monovalent or divalent metal ions such as $MnSO_4$, $CaCl_2$, KCl, and $MgSO_4$ did not inhibited $\beta$-glucosidase activity. $CuSO_4$ and NaCl showed low inhibition, and $ZnSO_4$ inhibited 3.3 times higher than control.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.1
• /
• pp.85-92
• /
• 2005

The performance of a novel fermentation process, adopting a sludge blanket type configuration for higher hydrolysis/acidogenesis of the municipal primary sludge, was investigated under batch and semi-continuous conditions with various pH and temperature conditions. This acid elutriation slurry reactor provided higher system performance with a short HRT (5 days) and higher acidogenic effluent quality under pH 9 and thermophilic ($55^{\circ}C$) conditions. The hydrolysis of the sludge was revealed to be significantly dependent on seasonal effects for sludge characteristics but with little impact on acidogenesis. Based on the rainy season at the optimum conditions, VFA production and recovery fraction ($VFA_{COD}/COD$) were $0.18\;g\;VFA_{COD}\;g^{-1}\;VSS_{COD}$ and 63%. As byproducts, nitrogen and phosphorus releasing were $0.006\;g\;N\;g^{-1}\;VSS_{COD}$ and $0.003\;g\;P\;g^{-1}\;VSS_{COD}$, respectively. For the mass balance in a full-scale plant($Q=158,880\;m^3\;day^{-1}$) based on the rainy season, the VFA and non-VFA(as COD) production were $3,110\;kg\;VFA_{COD}\;day^{-1}$ and $1,800\;kg\;COD\;day^{-1}$, resulting in an increase of organics of $31\;mg\;COD\;L^{-1}$ and $20\;mg\;VFA_{COD}\;L^{-1}$ and nutrients of $0.7\;mg\;N\;L^{-1}$ and $0.3\;mg\;P\;L^{-1}$ in the influent sewage. The economical benefit from this process application was estimated to be about $67 per $1,000m^3$ of sewage except for energy requirements and also, better benefits can be expected during the dry season. Also, the results revealed that the process has various additional advantages such as pathogen-free stabilized solids production, excellent solids control and economical benefits.

• Korean journal of applied entomology
• /
• v.49 no.3
• /
• pp.205-210
• /
• 2010

The bean bug, Riptortus pedestris (=clavatus) Fabricius (Hemiptera: Alydidae) is a serious pest of soybean in many countries. It enters a reproductive diapause in the winter by short day length (<13.5 h.) in Korea and Japan. The combined effects of temperatures ($25^{\circ}C$ and $8^{\circ}C$) and day lengths (10L:14D and 14L:10D) upon the termination of the male's diapause were studied. The combinations are (1) HTLD = $25^{\circ}C$, 14L:10D treatment for 1, 2, 3 weeks and 30 days; (2) HTSD = $25^{\circ}C$, 10L:14D treatment for 1, 2, and 3 weeks; (3) LTLD$\rightarrow$HTLD = $8^{\circ}C$, 14L:10D treatment for 1, 2, and 3 weeks followed by HTLD treatment; (4) LTSD$\rightarrow$HTLD = $8^{\circ}C$, 10L:14D treatment for 1, 2, and 3 weeks followed by HTLD. The amount of aggregation pheromone components secreted was adopted as the criteria for diapause termination in males. Males did not secrete aggregation pheromone under HTSD conditions. However, the males treated with HTLD for more than 21 days secreted significantly higher amounts of aggregation components, (E)-2-hexenyl (Z)-3-hexenoate and (E)-2-hexenyl (E)-2-hexenoate, compared to the control or HTSD treatments. The three components of the aggregation pheromone were secreted by the 14%, 29%, and 100% males treated with HTLD for 7 days, respectively. However more than 83% of the HTLD-treated males secreted all three components by the $30^{th}$ day under the treatment. In comparison, the pheromone amounts secreted by the males treated with LTLD$\rightarrow$HTLD or LTSD$\rightarrow$HTLD were equal or less than those secreted by males with continuous HTLD treatment.

• Food Science and Preservation
• /
• v.17 no.1
• /
• pp.1-8
• /
• 2010

We investigated the effect of freezing on changes in the chemical components of semi-dried red pepper (SDRP). We used storage temperatures of $0^{\circ}C,\;-10^{\circ}C,\;-20^{\circ}C,\;and\;-70^{\circ}C$. After 30 days of storage, capsaicin content had decreased by 40% at $0^{\circ}C$ and by 21% at $-20^{\circ}C$. Initial vitamin C content was 1,358.02 mg%. Compared with control, the $0^{\circ}C$ storage group showed a significant decrease in vitamin C content but no such decrease was noted in the $-20^{\circ}C$ and $-70^{\circ}C$ storage groups after 30 days. ASTA values were not influenced by storage temperature or period, in agreement with previous results. We concluded that storage was effective at temperatures of less than $-20^{\circ}C$. Next, both dried red pepper (DRP) and SDRP were stored at $-20^{\circ}C$ for 12 months. DRP had the lower level of capsaicinoids (55.01 mg%) owing to the long drying time. After 12 months, SDRP capsaicinoid had decreased by 30-33%, compared with a decrease of 54% in DRP. Initial vitamin C contents were 721.48 and 955.25 mg% in DRP and SDRP, respectively, and, after 12 months, vitamin C loss in the SDRP group (37%) was less than that in fresh red pepper (FRP) samples (45%). Initial $\beta$-carotene content was greatest in the FRP group (259.82 mg%), and that of DRP decreased by 20% after 12 months. The color a/b value of SDRP (1.40) was greater than that of DRP (1.00).

• Journal of Sericultural and Entomological Science
• /
• v.10
• /
• pp.1-25
• /
• 1969

Since widely use of anthracite for the radiating purpose in a rearing room in Korea, the weakness of silkworm, poor uniformity of the worm growth, the increase of missing worm ratio, unusual cocoon assorting ratio, and the decrease of cocoon layer ratio have been realized by the author, therefore, he has started out to search the mechanism of these evil influences regarding with various gas densities and terms of the gas treatment which will be supposed to be a warning for temperature control during the silkworm reading work. Among the anthracite gas components, CO or SO$_2$ influence and their complexed harm effect were investigated through the use of anthracite gas, CO and SO$_2$ gas. Meantime, each treatment was applied, separately, during the worm egg stage, young instar, adult instar and whole instar, because the harm intensity for any improperable rearing condition is flexible by the growing stages. Meantime, the gas density and term variation were applied for the above each treatment such as in case of anthracite and CO gas, the following treat methods were used. 1) 0.06% for 30 mins. 2) 0.06% for 1 hour. 3) 0.1% for 1 hour. 4) 0.15% for 1 hour. on the other hand, SO$_2$ gas was used as 1) 120ppm for 30 mins. 2) 200ppm for 30 mins. 3) 400ppm for 30 mins. The measurement of gas density was proceeded by using CO tester (Carbon Monoxide Indicator) and SO$_2$ tester (Indicator Sampler Cgf) which could keep any specific density before each treatment.

• The Korean Journal of Mycology
• /
• v.36 no.2
• /
• pp.153-162
• /
• 2008

Pinewood nematode (PWN) trapping by nematophagous fungi, Arthrobotrys conoides, A. dactyloides and A. oligospora and the fungal growth were characterized. The three Arthrobotrys species each was inoculated into the PWN cultured on Botrytis cinera fungal colony on potato dextrose agar (PDA). The effects of temperature, pH, PWN inoculation density and nutrients on the growth of the three Arthrobotrys spp were measured. A. conoides grew fast, 13.9 mm/day while A. dactyloides grew slow, 3 mm/day. PDA medium was the best for the fungal growth at $25^{\circ}C$ and pH 4.5. The Arthrobotrys spp growth was stimulated by 500 nematodes inoculation but not by 1000 inoculation. A. dactyloides did not grow below pH 4.5 and at high PWN density. A. conoides and A oligospora formed trapping organs with thick constricting hyphal network only when PWN present, while A. dactyloides formed the organ with circular hyphae constitutively. A. conoides formed trapping organs faster than A. oligospora did. The nematode trapping hyphae of the fungi penetrated into PNW inside to form many tiny infection bulbs and to digest the nematode. However, A. dactyloides formed a few trapping organs but no trapping was observed. Infection rate of PWN was 95% by A. conoides, 80% by A. oligospora and 92% by the combination inoculation of A. conoides and A. oligospora. In contrast A. dactyloides increased PWN density without infecton. There was no interaction effect in any combination inoculation of the three Arthrobotrys spp. A. conoides enhanced PWN infection rate by rapid hyphal growth and early trapping, while A. oligospora did it by increasing hyphal density. In conclusion A. conoides is the most effective in both hyphal growth and infection, and thus these characteristics can be utilized as a biological control of PWN.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.5
• /
• pp.253-261
• /
• 2015

In this study, Chlorophyll-a (chl-a) prediction model and multiple parameters affecting algae occurrence in Mulgeum site were evaluated by statistical analysis using water quality, hydraulic and climate data at Mulgeum site (1998~2008). Before the analysis, control chart method and effect period of typhoon were adopted for improving reliability of the data. After data preprocessing step two methods were used in this study. In method 1, chl-a prediction model was developed using preprocessed data. Another model was developed by Method 2 using significant parameters affecting chl-a after data preprocessing step. As a result of correlation analysis, water temperature, pH, DO, BOD, COD, T-N, $NO_3-N$, $PO_4-P$, flow rate, flow velocity and water depth were revealed as significant multiple parameters affecting chl-a concentration. Chl-a prediction model from Method 1 and 2 showed high $R^2$ value with 0.799 and 0.790 respectively. Validation for each prediction model was conducted with the data from 2009 to 2010. Training period and validation period of Method 1 showed 20.912 and 24.423 respectively. And Method 2 showed 21.422 and 26.277 in each period. Especially BOD, DO and $PO_4-P$ played important role in both model. So it is considered that analysis of algae occurrence at Mulgeum site need to focus on BOD, DO and $PO_4-P$.