• Current Applied Physics
• /
• 제18권11호
• /
• pp.1388-1392
• /
• 2018

Metal thin films are used widely to solve the vibration problem. However, damping mechanism is still not clear, which limits the further improvement of the damping properties for film and the development of multi-functional damping coating. In this paper, Damping microscopic mechanism of porous metal films was investigated at both macroscopically and microscopically mixed levels. Molecular dynamics simulation method was used to model and simulate the loading-unloading numerical experiment on the micro-pore and vacancy model to get the stress-strain curve and the microstructure diagram of different defects. And damping factor was calculated by the stress-strain curve. The results show that dislocations and new vacancies appear in the micro-pores when metal film is stretched. The energetic consumption from the motion of dislocation is the main reason for the damping properties of materials. Micro-mechanism of damping properties is discussed with the results of in-situ experiment.

• 산업식품공학
• /
• 제23권2호
• /
• pp.118-124
• /
• 2019

본 연구는 쌀과 차전자피를 기본 원료로 하여 glycerol monostearate (GMS), polyglycerol ester (PGE), sugar ester (SE)를 첨가한 압출성형물의 물리적 특성을 살펴보았다. 압출성형 공정변수는 원료 사입량 100 g/min, 스크루 회전속도 200 rpm, 사출구 온도 140℃, 수분함량 16%로 조절하였다. 압출성형 후 직경팽화율, 비길이, 밀도, 겉보기 탄성계수, 파괴력, 조직감, 색도, 수분용해지수, 수분흡착지수, 미세구조를 측정하였다. 직경팽화율은 대조군에서 4.71±0.17로 가장 높았고 GMS 0.5% 첨가군에서 3.52±0.08로 가장 낮았다. 비길이와 밀도는 대조군에서 가장 낮았다. 겉보기 탄성계수와 파괴력은 PGE 0.1% 첨가군에서 2.61E+04 N/㎡, 15.20±3.55 N/㎠로 가장 높았으며 대조군에서 1.36E±04 N/㎡, GMS 0.5% 첨가군에서 10.47±2.32 N/㎠로 가장 낮았다. 부착성은 대조군에서 -36.00±5.48 g으로 가장 높았고 GMS 0.5%와 SE 0.1% 첨가군에서 -24.00±5.48g, -24.00±5.58 g으로 가장 낮았지만 유화제 첨가군 사이에서 유의적인 차이가 없었다. 색도는 유화제 첨가군에서 명도가 증가하는 경향을 보였고 총 색도차는 감소하였다. 수분 용해지수와 수분 흡착지수는 대조군에서 41.73±0.48%, 8.09±0.05 g/g으로 가장 높았다. 미세구조는 대조군에서 기공의 크기가 가장 컸으며 유화제 첨가군에서 더 작은 기공 조직을 나타내었다. 차전자피 압출성형물에서 유화제의 첨가는 기공의 크기와 경도를 감소시켜 부드러운 조직감을 나타내었고 수분용해지수, 수분흡착지수, 부착성을 감소시켜 차전자피 압출성형물의 물성을 조절할 수 있는 것을 확인하였다.

• Physical Therapy Rehabilitation Science
• /
• 제6권2호
• /
• pp.77-82
• /
• 2017

Objective: Swimming and water-based exercise (WE) programs can provide vigorous physical activity in a fun and a motivating environment. The properties of water, may make it easier for children with cerebral palsy (CP) to move and to participate in an WE program. The aims of this study was to evaluate the effect of WEs on postural control in children with spastic CP. Design: Quasi-experimental design (one group pretest-posttest design). Methods: Twenty preschoolers with spastic CP participated in this study. Prior to the application, sufficient warm-up training was performed to allow the subjects to adapt to the water. Afterwards, three different types of underwater leg exercises for the flexor, extensor, and adductor/abductor of muscles of the lower limb were performed. The WE program lasted during 8 weeks, with one-40 minute sessions per week (8 training session). The usual care was performed during the training session. The Korean-trunk control measurement scale (K-TCMS) and weight distribution variability (difference of both Fz) were measured before and after training session. Results: According to the results, the K-TCMS scores of the three sub-levels, including static sitting, dynamic sitting, and dynamic reaching, was significantly increased after the training session (p<0.05). Also, the weight distribution variability was significantly decreased after 8 weeks (p<0.05). Conclusions: We suggest that WEs may improve the postural control ability in children with spastic CP. Furthermore, we support the need for additional research on the effect of WE on gait or activity of daily living performance with a control group included.

• PNF and Movement
• /
• 제12권1호
• /
• pp.33-37
• /
• 2014

Purpose: In this research, the properties of the shoulder joint were measured through eccentric resistive exercise with the patients who have rotator cuff tear of shoulder joints as the targets. Methods: 23 patients who have pain due to the rupture of rotator cuff on shoulder joints were selected and divided into Exercise group (12) and Control group (11). Two groups executed exercise for 30 minutes 3 days a week. Exercise group had executed eccentric resistive exercise, and the Control group executed Complex exercise. Results: In external rotation $180^{\circ}/s$, $240^{\circ}/s$, the Exercise group showed to be an average of 8% higher than the Control group. For Internal rotation $90^{\circ}/s$, $180^{\circ}/s$, $240^{\circ}/s$ the Exercise group showed to be an average of 30% higher that the Control group. Conclusion: To lessen the rupture of rotator cuff on shoulder joints, muscles strengthening is very important across various methods of eccentric exercise programs which are external/internal rotators of the shoulder joint needed for throwing. This is effective in preventing injury and improving rotation.

• Journal of the Korean Wood Science and Technology
• /
• 제33권2호통권130호
• /
• pp.40-55
• /
• 2005

This study was carried out to discuss the feasibility of wood and plastic wastes as the raw materials for wood particle-plastic composites. For this purpose, composites were manufactured from coarse and fine wood particles and polypropylene fibers by nonwoven web process. And the effect of wood particle size on the performance of the composites were analyzed according to ASTM D 1037-93. In the physical properties of composites, water absorption decreased with the increase of target density and polypropylene fiber content. And the composites with fine wood particles appeared to have slightly lower water absorption than those with coarse wood particles. Thickness swelling did not vary significantly with the increase of target density but increased with the increase of wood particle content. And the composites with fine wood particles were significantly lower in thickness swelling than those with coarse wood particles. In the mechanical properties of composites, dry and wet MOR showed the increasing tendency with the increase of polypropylene fiber content and target density. Dry and wet MOE showed the increasing tendency with the increase of target density but only wet MOE exhibited the increasing tendency with the increase of polypropylene fiber content. Composites with fine wood particles appeared to be generally higher in wet MOR and MOE than those with coarse wood particles. In conclusion, composites with fine wood particles showed generally higher performance than those with coarse ones. Also, composites were significantly superior to control particleboards in the performance, especially in water absorption and thickness swelling.

• 한국식품조리과학회지
• /
• 제16권4호
• /
• pp.311-315
• /
• 2000

Mulberry leaves Julpyun(a traditional Korean rice cake) was prepared by adding Mulberry leaves powder in the ratio of 0%, 3%, 6% and 9% of rice flour, and tested for inorganic nature, physical function, chromaticity, and rheological properties. As the ratio of mulberry leaves powder increased, both the amounts of major inorganic ingredients, calcium, magnesium, and sodium, and the amounts of minor inorganic ingredients, iron, copper, and zinc, were increased proportionally. Thus, one way to increase the amounts of inorganic ingredients appeared to add mulberry leaves powder. In physical function test, control cake(0% mulberry leaves) showed the highest value in appearance and the value decreased as the amounts of mulberry leaves increased. In color, 3%-mulberry leaves-Julpyun gave the highest value followed by 0%, 6%, and 9%-Julpyun in order. The values of texture and moisture were decreased as the ratio of mulberry leaves powder increased. In rheometer test, 9%-mulberry leaves Julpyun showed the high values in hardness, cohesiveness, and brittleness. Therefore, as the amounts of mulberry leaves powder increased, the amounts of inorganic ingredients increased, but the value of physical function test decreased. 9% mulberry leaves Julpyun has the highest value of rheometer test.

• 한국가구학회지
• /
• 제17권1호
• /
• pp.33-46
• /
• 2006

This study was carried out to investigate a radio-frequency/vacuum (RF/V) drying ability and physical properties of the green boards and the pre-kiln dried boards with 40 mm thickness, and the 70 mm-thick green board of Iroko (Milicia excelsa). The major results were summarized as follows; The drying time from initial moisture content (MC) of 110% to approximate 6% MC for a 40mm-thick green board was 192 hours, and about 200 hours for the 70 mm-thick green board, respectively and so the RF/V drying times were dramatically shortened compared to conventional kiln drying time. The case hardenings at the RF/V drying completion stage test were very negligible, thus represented almost no existence of the residual stress. The checks were very slightly formed on all of the boards during the RF/V drying test, but crook appeared quite severely. During the accelerating test, the water-resistant treated specimens had not experienced any signs of checking occurred, whereas the control boards had encountered very frequent occurrences of end checking and slight surface checking. There were no observations of warping and discoloring regardless of the treatment.

• 한국유기농업학회지
• /
• 제19권spc호
• /
• pp.218-221
• /
• 2011

To improve the soil properties of physical and microbial community rice bran and wood charcoal were applied in the continuously cultivated plastic film house soil. Soil physical properties were improved by application of rice bran and charcoal compared to chemical fertilizer application (control) by 8~14% in bulk density and 5~9% in soil porosity. Changes in the biological ratio indexes of fatty acids in the soils were detected depending on the inputted materials. Especially in application of rice bran including mixture with charcoal, much more fungi and less bacteria were detected and the ratio of fungi to bacteria was increased, suggesting the more organic carbon metabolically active in these treatments. The high ratio of aerobe to anaerobe suggested the better aerobic conditions were in the soil inputted wood charcoal. From these results, it is important and possible to select some materials for the organic pepper cultivation, which may improve the poor condition soil.

• 한국연초학회지
• /
• 제13권1호
• /
• pp.13-18
• /
• 1991

This experiment carried out to review influence of relative humidity, temperature and net weight on cigarette hardness for the uniformal control of cigarette quality. Obtained results are as follows: 1. The difference in the cigarette physical properties of constant hardness control is considerably lower than that of constant net weight control. 2. Contribution rate for cigarette hardness is relative humidity > net weight > temperature. 3. The multiple regression equation of cigarette hardness related with relative humidity, temperature and net weight is calculated as follows.

• 콘크리트학회논문집
• /
• 제11권5호
• /
• pp.41-49
• /
• 1999

This study dealt with the applicability and quality control of the concrete using fly ash produced in combined heat power in a construction site. Firstly, chemical and physical characteristics of the fly ash produced in combined heat power plant re analysed. Also, after investigating the properties of flesh and hardened concrete through various experiments, the fly ash concrete was placed in depositing construction in Ulsan Petrochemical Service Co. This field application was focussed on the quality control system in the site as production, placing and curing of concrete. As the result of this study, the quantity of CaO in the fly ash is relatively high based on the chemical analysis. The fly ash concrete showed slumping maintenance and high viscosity properties in the optimal mixing conditions (W/B:44~45%, S/a:$45\pm$2%, W:185kg/m). And, quality control and assurance of the fly ash concrete in actual site were verified by various testing methods.