• Journal of Embryo Transfer
• /
• v.28 no.1
• /
• pp.13-18
• /
• 2013

The increase in the meat quality and milk production of cows, which breed Korean Native Cow (KNC) and Holstein cow, is not improving reproductive efficiency. In this study, we examined the effect of interferon (IFN) supplementation on motility of frozen-thawed semen and pregnancy rate after artificial insemination of KNC and Holstein cow. In experiment 1, we investigated the effect of IFN-tau concentration (10,000 IU and 20,000 IU) on the percentage of total motility (TM) and progressive motility (PM) of frozen-thawed spermatozoa. In experiment 2, KNC were infused 20,000 IU IFN-tau at insemination or after insemination. In experiment 3, KNC or Holstein cow were inseminated with frozen-thawed semen and infused 20,000 IU IFN-gamma or -tau after insemination. In experiment 1, the average of TM (23.9% to 30.9%) and PM (18.5% to 21.9%) were similar between control and treatments. In experiment 2, the pregnancy rates of IFN infusing times were not different from 45.8% to 53.6%. In experiment 3, the pregnancy rates of Holstein cow infused different kinds of IFN were similar (control, IFN-gamma, IFN-tau; 42.9%, 40.5%, 48.0%). In the case of KNC, however, the pregnancy rate of control was 55.6%, which was significantly lower than that of IFN-gamma (68.9%; p<0.05). Thus, IFN is effective on the improvement of reproductive efficiency, but further study is needed.

• The Journal of Korean Academy of Prosthodontics
• /
• v.15 no.1
• /
• pp.34-42
• /
• 1977

The author attempted to observed the histological changes of the temporomandibular joints of rabbits by including malocclusion. Thirth-two healthy male rabbits were devided into two groups; control and experimental group. Eight rabbits were kept as control group, while metal crowns were seated on unilateral lower molar teeth of twenty-four rabbits as experimental group. And the interocclusal distance of the incisal edge was kept 1.5mm from the begining to the end of the experimental periods. Rabbits of each group, one of control group and three of the experimental gorup, were killed at the intervals of one day, three days, one week, two weeks, four weeks, six weeks, eight weeks, and twelve weeks after experiment. The temporomandibular joint including condyle head, articular disc and glenoid fossa were excised and decalcified. The decalcified sections were made histologic sections. The results obtained were as follows. 1. The regressive changes of the condylar head were the main reaction in this experiment that consist of decreasing or increasing thickness of the fibrocartilage zone with hyaline degeneration, decreasing of the cellularity of the proliferative zone, and the irregularity of the arrangement of chondrocytes and size of the lacunae of cartilage cells with chondroclasia and osteoclasia in hypertrophic zone. 2. The regressive changes of the condylar surface of the crown seated side were persisted to the end of the experiment. 3. On the non-crown seated side, severe aggressive changes occurred in initial stage, but hyperplastic changes of the condylar surface noted in the middle of the experimental periods. 4. Although aggressive changes occurred in initial stage of experiment on the non-crown seated side, hyperplastic changes of the condylar surface were noted in the middle of the experimental periods, and remodeling appeared at the termination of the experimental periods. 5. The articular disc exhibited pannus formation on both crown seated and non crown seated side from the beginning of the experiment. The pannus persisted throughout the experiment on the crown seated side, but on the non-crown seated side it disappeared from six week group.

• Korean journal of applied entomology
• /
• v.23 no.2 s.59
• /
• pp.96-101
• /
• 1984

This experiment was carried out to investigate control efficacy by cultural practice and fumigation of tacterial wilt caused by Pseudomonas solancearum in resistant tobacco line NC82 at the Korea Ginseng and Tobacco Research Institute, Eumseong Experiment Station in 1982 and 1983. The bacterial wilt of tobacco occurred severely from mid-July to last August in applicable temperature and soil humidity for increasing bacteria. Disease severity appeared low and slowly at fumigation and resistant variety treatment. Incidence of bacterial wilt in tobacco line NC82 was $44.7\~55.8\%$ being compared with susceptible variety, NC2326 and $95\~99\%$ when resistant variety, NC32 was cultivated with soil fumigation treatment. Control efficacy of cultural practices appeared low with $0.8\~20\%$ and was not different from resistant variety and fumigation treatment. Control system against bacterial wilt in flue-cured tobacco was accomplished by control efficacy over $95\%$ when resistant variety(NC82) was cultured after treatment of cultural practices (Tillering after harvest and before transplanting, stalk and root destruction, early transplanting early removal of the mulching film) and soil fumigation(Cylon).

• Horticultural Science & Technology
• /
• v.19 no.3
• /
• pp.320-324
• /
• 2001

This study was conducted to investigate the effects of mechanical stimulation and growth regulators known to control overgrowth in hot temperature tomato transplants on the seedling quality and the growth and yield after planting. Brushing and impedance were applied as mechanical stimulation, and diniconazole and hexaconazole as chemical growth regulator were used in various ways at different concentrations and treatment times. Diniconazole treatment regardless of concentration and treatment times reduced plant height, leaf area and fresh weight of young plant. Though treatments of high concentration and many times reduced the yield of tomato after planting, these of proper amount and proper times maintained the level of control. Hexaconazole treatment controlled less plant height of transplants than diniconazole, and its effect also didn't support continuously after planting. However, hexaconazole treatment reduced the yield due to little fruit number and malformed plants, and also delayed the harvesting time as compared to the control. Both brushing and impedance controlled plant height of transplants. However, impedance treatment reduced the yield due to malformed plants after planting, and also delayed the harvesting time, while brushing treatment didn't reduced growth and yield as compared to the control. From the above results, it was thought that proper application of brushing and diniconazole can control excessive overgrowth without reducing yield.

• Journal of Bio-Environment Control
• /
• v.15 no.2
• /
• pp.184-189
• /
• 2006

Effects of interspace mulching between polyethylene film house on growth and quality of oriental melon were followed. Soil moisture in control was 26.0%. Those of black nonwoven fabrics sheet and black film were less 1.2% and 2.9% than control, respectively. Soil temperature in control plot was $2.4^{\circ}$ Those of black nonwoven fabrics sheet and black film were higher $0.8^{\circ}$ and $1.8^{\circ}$ than control, respectively. Black film was better than control in stem length, leaf number and area, chlorophyll content, xylem exudate, first flowering and fruit riping periods. Black film was better in fruit weight and soluble solid, and lesser in fermented and malformed fruit ratios, and increased 28% in marketable fruit ratio to control, 1,864kg. This results were mainly from vinyl coverage between polyethylene film house to intercept rainfall and to increase soil temperature, which fasted growth of roots after transplanting in winter season.

• Smart Structures and Systems
• /
• v.11 no.3
• /
• pp.315-329
• /
• 2013

The construction of an experimental nonlinear structural model with little cost and unlimited repeatability for vibration control study represents a challenging task, especially for material nonlinearity. This paper reports the design, analysis and vibration control of a nonlinear structural experiment platform with adjustable hinges. In our approach, magnetorheological rotary brakes are substituted for the joints of a frame structure to simulate the nonlinear material behaviors of plastic hinges. For vibration control, a separate magnetorheological damper was employed to provide semi-active damping force to the nonlinear structure. A dynamic neural network was designed as a state observer to enable the feedback based semi-active vibration control. Based on the dynamic neural network observer, an adaptive fuzzy sliding mode based output control was developed for the magnetorheological damper to suppress the vibrations of the structure. The performance of the intelligent control algorithm was studied by subjecting the structure to shake table experiments. Experimental results show that the magnetorheological rotary brake can simulate the nonlinearity of the structural model with good repeatability. Moreover, different nonlinear behaviors can be achieved by controlling the input voltage of magnetorheological rotary damper. Different levels of nonlinearity in the vibration response of the structure can be achieved with the above adaptive fuzzy sliding mode control algorithm using a dynamic neural network observer.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.3
• /
• pp.14-20
• /
• 2015

It is important to understand psychological and physiological responses of occupants who seated in a chair in order to shape a comfortable indoor official environment. So it is needed to find out optimal seated conditions. The purpose of this study was to explore optimal condition of seat air conditioning control based on psychological or subjective responses (perceived temperature and comfort sensation) and physiological responses (heartrate variability; HRV). To do this, experimental conditions were designed by the difference of indoor temperature and seat air conditioning temperature. In the experiment 1, seven experimental conditions were designed with one control condition which was not used seat air conditioning system, and six experimental conditions which the difference of indoor temperature and seat air conditioning temperature ($-1^{\circ}C{\sim}-6^{\circ}C$). In the experiment 2, four experimental conditions were designed with one control condition and three experimental conditions ($-3^{\circ}C{\sim}-5^{\circ}C$). In addition, participants' psychological or subjective response was measured by CSV (comfort sensation vote) and PTS (perceived temperature sensitivity) as a psychological or subjective response, and heartrate variability was measured as a physiological response. As a result, in the experiment 1, it was reported that the optimal conditions of seat air conditioning control based on participants' psychological or subjective comfort were from $-3^{\circ}C$ to $-5^{\circ}C$ experimental conditions. In addition, in the experiment 2, it was reported that the optimal condition of seat air conditioning control based on participants' physiological comfort was $-4^{\circ}C$ experimental condition. These results suggested that seat air conditioning could affected to comfort sensation of occupants in an appropriate range, rather than unconditionally.

• Geomechanics and Engineering
• /
• v.24 no.5
• /
• pp.471-478
• /
• 2021

Water damage is one of the five disasters that affect the safety of coal mine production. The erosion of rocks by water is a very important link in the process of water inrush induced by fault activation. Through the observation and experiment of fault filling samples, according to the existing rock classification standards, fault sediments are divided into breccia, dynamic metamorphic schist and mudstone. Similar materials are developed with the characteristics of particle size distribution, cementation strength and water rationality, and then relevant tests and analyses are carried out. The experimental results show that the water-rock interaction mainly reduces the compressive strength, mechanical strength, cohesion and friction Angle of similar materials, and cracks or deformations are easy to occur under uniaxial load, which may be an important process of water inrush induced by fault activation. Mechanical experiment of similar material specimen can not only save time and cost of large scale experiment, but also master the direction and method of the experiment. The research provides a new idea for the failure process of rock structure in fault activation water inrush.

• Nuclear Engineering and Technology
• /
• v.55 no.2
• /
• pp.595-602
• /
• 2023

The EAST ICRF system operating space has been extended in power and phase control with a low-level RF system for the new double-strap antenna. Then the multi-step power and periodic phase scanning experiment were conducted in L-mode plasma, respectively. In the power scanning experiment, the stored energy, radiation power, plasma impedance and the antenna's temperature all have positive responses during the short ramp-ups of P_L;ICRF. The core ion temperature increased from 1 keV to 1.5 keV and the core heating area expanded from |Z| ≤ 5 cm to |Z| ≤ 10 cm during the injection of ICRF waves. In the phasing scanning experiment, in addition to the same conclusions as the previous relatively phasing scanning experiment, the superposition effect of the fluctuation of stored energy, radiation power and neutron yield caused by phasing change with dual antenna, resulting in the amplitude and phase shift, was also observed. The active control of RF output facilitates the precise control of plasma profiles and greatly benefits future experimental exploration.

• Proceedings of the KIEE Conference
• /
• 2006.04b
• /
• pp.87-90
• /
• 2006

The direct instantaneous torque control (DITC) method is presented in this paper, which enables torque to be generated during all region and instantaneous torque control to be possible. The hysteresis control mode with the compared value between given torque and instantaneous output torque as input is applied in respect region. The output torque function, that is instantaneous output torque with the variation of current and position of rotor, is achieved by experiment. In this control mode the torque subsection function and current control are not needed. The turn on angle with variation of load torque and speed is only selected and turn off angle can be neglected. The validity of method is tested by simulation and experiment.