• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.616-619
• /
• 1996

This paper presents the configuration methodology of Distributed Control System(DCS)s for process plant and their performance evaluation. Performance evaluation is specified both in terms of operational and installation aspects of system. In order to evaluate performance criteria of operational aspect, a simulation method is proposed. Modeling of system components including process computer, database, process controllers and LANs, etc, is implemented for simulation. Based on these characteristics, different system configurations are evaluated and compared through results about evaluation criteria in order to select the best DCS for particular process. The results, in abbreviated form, of the performance evaluation of DCS controlling a CAL(Continuous Annealing Line) plant of iron process are presented.

• 대한기계학회논문집A
• /
• 제33권11호
• /
• pp.1225-1232
• /
• 2009

This study suggests a structural design process for the upper control arm installed at a vehicle. Static strength and durability are the most important responses in the structural design of a control arm. This study considers the static strength in the optimization process. The inertia relief method for FE analysis is utilized to simulate the static loading conditions. According to the classification of structural optimization, the structural design of a control arm is included in the category of shape optimization. In this study, the metamodel technique using the kriging method is adopted to obtain the minimum weight satisfying the strength constraint. Then, the final design is suggested by considering the durability criteria. The durability assessment is obtained by the index of fatigue durability called the SWT (Smith-Watson-Topper) index. The final optimum shape has been proposed by trial and error method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.216-218
• /
• 1995

This paper presents the concepts developed to propose Distributed Control System(DCS). To achieve adequate satisfaction under various conditions, the DCS should be designed from two points of view of functions distributions and performance planning. Performance evaluation criteria can be specified by the response time between units and the utilization of each unit. One has to also consider the ease and the cost of installation, maintenance, repair. Based on these characteristics, different system configuration can be evaluated and compared through results about evaluation criteria in order lo select the best DCS for particular process. The results, in abbreviated form, of the simulation DCS controlling a CAL(Continuos Annealing Line) plant of iron process ate presented.

• 산업경영시스템학회지
• /
• 제31권4호
• /
• pp.168-176
• /
• 2008

In an environment where manufacturing conditions such as product lines keep changing, manufacturing control systems need to be continually maintained and upgraded according to the change. This requires an effective system implementation methodology. In this paper, a methodology based on the multi-criteria similarity comparison of manufacturing processes is proposed. A newly introduced process is compared with existing ones based on the multi-criteria similarity, and candidates for software reuse are selected from stored modules according to the overall process characteristics. The proposed methodology has been tested for an electronics manufacturing company's manufacturing control system, and the result has been satisfactory in that it can save time and efforts for system implementation.

• Earthquakes and Structures
• /
• 제8권1호
• /
• pp.77-100
• /
• 2015

Multiple tuned mass dampers (MTMDs) tuned to various frequencies have been shown to efficiently control the seismic response of structures where multiple modes are dominant. One example is irregular structures that are found more vulnerable than their symmetric counterparts. With the technology of MTMDs available, design and optimal design methodologies are required for application. Such a methodology, in the form of an analysis/redesign (A/R) scheme, has been previously presented by the authors while limiting responses of interest to allowable values, i.e., performance-based design (PBD). In this paper, the A/R procedure is modified based on formal optimality criteria, making it more cost efficient, as well as more computationally efficient. It is shown that by using the methodology presented herein, a desired performance level is successfully targeted by adding near-optimal amounts of mass at various locations and tuning the TMDs to dampen several of the structure's frequencies. This is done using analysis tools only.

• 한국지반공학회논문집
• /
• 제39권10호
• /
• pp.5-18
• /
• 2023

일반적인 토공사에서 사용하는 진동롤러에 의한 층다짐을 급속충격다짐(RIC)공법을 이용한 일시 다짐으로 대체하면 토공에 소요되는 공사기간을 획기적으로 단축할 수 있다. 동적하중에 의한 다짐은 모래와 같은 조립질 토사에 적합한 공법으로 인식되고 있는데, 최근에는 매립 프로젝트의 주요 재료인 모래의 공급부족으로 세립분을 함유한 토사의 사용이 점차 증가하고 있다. 따라서 RIC와 같은 동적하중에 의한 다짐공법을 적용하기 위해, 세립분을 함유한 매립재료 사용 시의 유효개량심도에 대한 검증이 필요하다. 본 연구에서는 깨끗한 모래인 Sand fill과 세립분이 함유된 Public fill에 대한 RIC공법 적용 전·후의 현장시험 결과를 비교하여 세립분 함량에 따른 RIC공법의 유효개량심도에 대한 영향을 검토하고, 콘저항치 q_c를 사용한 다짐 품질관리기준과 관련된 문제를 논의하였다. 결론적으로 세립분을 포함하는 다양한 종류의 매립토사에 대한 다짐 품질관리를 위해서는 q_c 측정값의 정규화가 필요하며, 깨끗한 모래의 상대밀도 Dr=70%에 해당하는 다짐 품질관리기준은 정규화 콘저항치 Q_tn,cs=110으로 평가되었다. 이러한 결과를 바탕으로, RIC 품질관리 시에 적용 가능한 매립토사의 세립분 함량을 고려한 심도별 q_c 품질관리기준을 제안하였다.

• 한국환경보건학회지
• /
• 제41권2호
• /
• pp.102-115
• /
• 2015

Objectives: A learning organization was designed and implemented on the basis of the selection criteria and essential elements of knowledge translation theory. Methods: The learning organization was designed on the basis of biosafety harmonization criteria and risk management strategy and was implemented as the learning organization for biosafety management by the National Institute of Health, Korea Centers for Disease Control & Prevention. The effect of knowledge translation in the research institutions by evidence-based policy was verified. Results: The result of applying the knowledge translation theory involving all stakeholders showed a positive reaction in establishing and implementing biosafety management strategy and embodied risk assessment criteria and evoked sympathy with the necessity of learning and using of expert knowledge about risk assessment and risk management. All stakeholders initiated voluntarily action toward new human-network construction and communication between similar organizations. The learning organization's capability expanded the base of knowledge translation. Conclusion: These results showed that a learning organization could enhance the autonomous safety management system by diffusion of knowledge translation.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.968-973
• /
• 2007

The systems such as the railway control system, satellite control system and nuclear power plant control system are the safety critical systems because the failure of them could lead to risk significant events. These softwares of digital systems must follow the life cycle process from the beginning of software development to guarantee their safety and reliability. The NRC(Nuclear Regulatory Commission) Reg Guide of nuclear fields, the RTCA/DO-178B standard which is used to acquire the certification for software in industrial aero field in European Union and United State, the DEF STAN 00-55 standard for the safety of electronic weapon in England, the IEC 601-1-4 for medical equipment and the IEC 62279 for railway system recommended the development life cycle. This paper introduces the development process and compares each other. Also it indicates applicable development criteria for the software of systems related to railway fields and describes the detailed procedure of development criteria. We describe the procedure to make the software development criteria in nuclear filed. For the software development related to railways, the process from plan phase to maintenance phase must be satisfied. The safety and reliability is guaranteed through these standards.

• 제어로봇시스템학회논문지
• /
• 제5권5호
• /
• pp.550-557
• /
• 1999

This paper describes a road-following controller using the proposed neural network for autonomous vehicle. Road-following with visual sensor like camera requires intelligent control algorithm because analysis of relation from road image to steering control is complex. The proposed neural network, relative similarity modular network(RSMN), is composed of some learning networks and a partitioniing network. The partitioning network divides input space into multiple sections by similarity of input data. Because divided section has simlar input patterns, RSMN can learn nonlinear relation such as road-following with visual control easily. Visual control uses two criteria on road image from camera; one is position of vanishing point of road, the other is slope of vanishing line of road. The controller using neural network has input of two criteria and output of steering angle. To confirm performance of the proposed neural network controller, a software is developed to simulate vehicle dynamics, camera image generation, visual control, and road-following. Also, prototype autonomous electric vehicle is developed, and usefulness of the controller is verified by physical driving test.

• 한국건축시공학회지
• /
• 제9권3호
• /
• pp.65-71
• /
• 2009

General criteria for the quality of porous concrete have not been established yet in Korea. And yet, pavement and construction have been performed. In this paper, guidelines on the construction site quality control of porous concrete were developed in order to establish criteria for resolving the issues and problems of porous concrete, to establish methods for improving poor performance, and to manage porous concrete more systematically. In addition, a guide for the construction site quality control of porous concrete, which was appropriate for reality, was developed by researching several quality control guides and maintenance at construction sites. The guide consists of a total of nine chapters such as Application Range, Overview, the Structure of Porous Concrete, the Design of Package Thickness, Package Materials for Porous Concrete, Construction Methods, Quality Assurance and Inspections, Construction Site Quality Control, and Maintenance. It describes quality control guidelines in all steps such as methods for transporting porous concrete from the factory to the construction site, cautions for construction work at construction sites, maintenance, and management. The Guide for the Construction Site Quality Control of Porous Concrete is expected to ensure the quality of porous concrete, to reduce national costs for quality assurance, and to help ensure the health and safety of Korean people.