• Journal of Electrical Engineering and Technology
• /
• v.11 no.1
• /
• pp.215-226
• /
• 2016

Modeling, control and implementation of a real redundant robot with five Degrees Freedom (DOF) of the SCARA (Selective Compliant Assembly Robot Arm) manipulator type is presented. Through geometric methods and structural and functional considerations, the inverse kinematics for redundant robot can be obtained. By means of a modification of the classical sliding mode control law through a hyperbolic function, we get a new algorithm which enables reducing the chattering effect of the real actuators, which together with the learning and adaptive controllers, is applied to the model and to the real robot. A simulation environment including the actuator dynamics is elaborated. A 5 DOF robot, a communication interface and a signal conditioning circuit are designed and implemented for feedback. Three control laws are executed in: a simulation structure (together with the dynamic model of the SCARA type redundant manipulator and the actuator dynamics) and a real redundant manipulator of the SCARA type carried out using MatLab/Simulink programming tools. The results, obtained through simulation and implementation, were represented by comparative curves and RMS indices of the joint errors, and they showed that the redundant manipulator, both in the simulation and the implementation, followed the test trajectory with less pronounced maximum errors using the adaptive controller than the other controllers, with more homogeneous motions of the manipulator.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.3
• /
• pp.155-162
• /
• 2018

Delta robots are usually used for industrial manufacturing, but heavy weight and expensive price have been obstacles to rapid propagation of robots in the field. The goal of this research is to make light-weight and price-competitive delta robots. To reduce the weight, we used plastic material for the arm link, and to reduce the price, we used a step-motor as the main actuator. First we formulated the equations of inverse kinematics for the designed delta robot and then verified these equations by using multibody-dynamics simulation. An algorithm of motion control was developed and applied to the motion-processing unit using a timer-interrupt of 8 milliseconds. Finally, we tested the performance of the new delta robot by checking its control of motion along line segments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.11
• /
• pp.945-954
• /
• 1990

In this paper, we presents a robust adaptive control system design method in the work coordinate of the robot arm for conveyor tracking. In the design, if the weighting function $L_K$ is smaller than the design parameter then the transient characteristics of system becomes stable, if $L_K$ is larger than then the system becomes unstable. Proposed design method presented here is based on model referenece adaptive control and Popov stability theorem. By the utiliza/tion of an auxilary input, it is improved the transent characteristics of the system in comparison with the conventional model reference adptive control, since the rate of V and V(t) is large. The usefulness of a proposed design method has been confirmed by computer simulations.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.548-550
• /
• 2006

This paper deals with the implementation of a small humanoid robot controller on the basis of Real Time Operating System(RTOS) and the FPGA. This controller was adapted to the humanoid robot with 25 DOFs, which are 12 DOFs in each leg, 8 DOFs in each arm, 3 DOFs in waist, and 2 DOFs in head. The robot actuators were used DX-117 servo motors that have all of the controller components in one module in order to simplify the control structure. In addition, the main controller is FPGA of Virtex4-FX from Xilinx, and ported on VxWorks that is kind of RTOS. It is essential to install this RTOS on the complex control system and to do control activity at the multitasking environments. This paper suggested the method of distributing the computational load in the humanoid robot controller using the FPGA and RTOS concepts. All of the control process was verified through the real action of the humanoid.

• Research in Community and Public Health Nursing
• /
• v.12 no.2
• /
• pp.344-360
• /
• 2001

A quasi-experimental study was conducted to investigate the effects of health promotion program on health of the clients with arthritis. In this study. the health promotion program consisted of self appointment and confirmation. discussion, health education. group counsel, and exercise. And the program focused on self - help group meeting. A total of 68 subjects was randomly assigned into either the control group(n = 24) or the intervention group(n =44). The results of the study analyzed using a SPSS win, were as follows: 1) In physical function of physical health. there was a significant improvement in flexibility of the shoulder joint(hold the hand upward and downward behind the back). sit and reach, extension of the knee joint in the intervention group, compared to the control group, while no difference in flexibility of the shoulder joint(raising the arm), flexion of the knee joint, and grip strength. There was a significant improvement in physical functional disability in the intervention group, compared to the control group, but no difference in fatigue and pain. 2) The health promotion program resulted in improvement in psychosocial health(e.g. increase of self-efficacy and decreases of social functional disability) in the intervention group, compared to the control group. It was concluded that the health promotion program(weekly session for 6 weeks) employed in this study was appropriate for the clients with arthritis in primary health care center and had a positive effect on health in general.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.2
• /
• pp.185-190
• /
• 2005

A systematic output tracking control design technique for robust control of Takagi-Sugeno (T-S) fuzzy systems with norm bounded uncertainties is developed. The uncertain T-S fuzzy system is first represented as a set of uncertain local linear systems. The tracking problem is then converted into the stabilization problem for a set of uncertain local linear systems thereby leading to a more feasible controller design procedure. A sufficient condition for robust asymptotic output tracking is derived in terms of a set of linear matrix inequalities. A stability condition on the traversing time instances is also established. The output tracking control simulation for a flexible-joint robot-arm model is demonstrated, to convincingly show the effectiveness of the proposed system modeling and controller design.

• Journal of Drive and Control
• /
• v.10 no.1
• /
• pp.29-36
• /
• 2013

Excavation is an important work in mining, earth removal and general earthworks. Nowadays, automation in excavator has been studied by several researchers. In the excavator research methods, simulation is one of the low cost methods for applied to test safely. In this paper, designed a virtual hydraulic excavator that with the control and the dynamic. At first, the simulation of hydraulic system for excavator's attachment such as boom, arm and bucket using Matlab/Simhydraulic is presented. Second, the dynamic model of excavator is distributed to combine with the hydraulic system. For controlling this system, electric joysticks are used to operate the orifice open areas in Main Control Valve. The simulation result is described to analysis the performance of this virtual excavator.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.10
• /
• pp.120-129
• /
• 2002

An integrated structure and controller design approach for rotating cantilever beam is presented. An optimization method is developed for improving positioning performance considering the elastic deformations during high speed rotation and adopting the beam shape and the control gains as design variables. For this end, a dynamic model is setup by the finite element method according to the shape of the beam. The mass and stiffness of the beam are distributed in such a way that the closed-loop poles of the control system should be located leftmost in the complex s-plane. For optimization method, the simulated annealing method is employed which has higher probability to find the global minimum than the gradient-based down-hill methods. Sequential design and simultaneous design methods are proposed to obtain the optimal shape and controller. Simulations are performed with new designs by the two methods to verify the effectiveness of the approach and the results show that the settling time is improved for point-to-point position controls.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.4
• /
• pp.1751-1767
• /
• 2016

Home security has become the prime concern for everyone in present scenario. In this work an attempt has been made to develop a home security system which is accessible, affordable and yet effective.The proposed system is based on 'Remote Embedded Control System' (RECS) which works both on the web and gsm platform for authentication and monitoring. This system is therefore cost effective as it relies on existing network infrastructure. As PCA is most popular and efficient algorithm for face recognition, it has been usedin this work. Next to it an interface has been developed for communication purpose in the embedded security system through the ZigBee module. Based on this embedded system, automated control of door movement has been implemented through electromagnetic door lock technology. This helps the users to monitor the real-time activities through web services/SMS. The web service consists of either web browser command or e-mail provision. The system establishes the communication between the system and authenticated user. The e-mail received by the system from the authorized person will monitor and control the real-time operation and door lock. The entire control system is reinforced using ARM1176JZF-S microcontroller and tested for actual use in the home environment. The result shows the experimental verification of the proposed system.

• Physical Therapy Rehabilitation Science
• /
• v.11 no.2
• /
• pp.165-171
• /
• 2022

Objective: Nonspecific low back pain (NSLBP) is experienced worldwide by many age groups. Yoga is recommended as an exercise to reduce back pain and stress because it is a breathing exercise, posture, and meditation as key elements. The aim of this study is to compare the effects of yoga and stabilization exercise on pain intensity, function, and depression. Design: An open-label, parallel arm, randomized controlled trial Methods: Twenty-four participants were allocated to the experimental and the control group in a ratio of 1:1. Yoga (experimental group) and stabilization exercise (control group) were received twice a week for 6 weeks Participants were assessed at baseline and post-intervention for pain intensity (numeric pain rating scale), function (Aberdeen low back pain scale, flexibility,and strength), and depression (Beck depression inventory). Results: When the experimental group (Yoga) and control group (stabilization exercise) were performed twice a week for 6 weeks, numeric pain rating scale, Aberdeen low back pain scale, and flexibility in post-intervention showed significant improvement in both groups (P<0.05), However, in all variables, the experimental group showed a positive benefit compared to the control group (P<0.05). Conclusions: The results of this study show that yoga has more positive benefits compared to stabilization exercise in pain intensity, function, and depression in individuals with NSLBP.