• 전자공학회논문지SC
• /
• 제49권2호
• /
• pp.1-9
• /
• 2012

본 논문에서는 이원화된 필드버스 기반의 선박 엔진용 분산 제어시스템을 설계 및 구현한다. 구현된 시스템은 엔진의 상태 값을 감시하기 위해서 CAN과 MODBUS 프로토콜을 혼합 형태로 이용하여 서로 다른 영역의 통신 구조로 구성한다. 첫 번째 층은 CAN프로토콜을 이용하여 엔진의 상태 값을 공유하게 된다. 두 번째 층은 MODBUS를 이용하여 엔진룸에서 기관실의 AMS로 모니터링 데이터 전송을 위한 통신을 지원한다. 테스트 베드 환경을 구축하여 구현된 시스템을 선급기술규칙의 요구사항에 의거하여 테스트 및 성능 검증하였다.

• 한국컴퓨터산업학회논문지
• /
• 제8권1호
• /
• pp.41-48
• /
• 2007

본 논문은 Java 기술을 이용하여 TCP/IP 상에서 웹 기반의 원격 감시제어시스템 개발에 대한 예를 제시하였다. Java의 Socket 클래스를 이용한 클라이언트/서버 소켓 프로그램을 구현하였고 이를 레고 블록으로 만든 온실 모델에 적용하여 웹 기반 온실 감시제어시스템을 구축하였다. 구축된 웹 기반 온실 감시제어시스템은 온실의 정보를 클라이언트 프로그램에 잘 전달하여 표시하며 웹 상에서 동작하는 Java Applet 클라이언트에서 보내는 제어 신호를 서버를 통해 온실 모델에 잘 전달하여 동작시키는 것을 볼 수 있었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.1169-1172
• /
• 2002

This paper presents the development of an expert system for monitoring and control of an oil production facility. The objectives of developing an expert system for the oil production facility are to monitor the Important processing parameters in different sections of the facilities and to control battery operations in real time. By providing consistent, fast, and reliable decision support to operators, the expert system can be used for automated monitoring and control of a petroleum production facility located south of Regina in Saskatchewan, Canada. The system was implemented in Visual Basic 6.0.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제51권7호
• /
• pp.279-285
• /
• 2002

This Paper deals with the economical equipment control which is used by internet network system at the industrial workplace. If the control devices can be accessed by internet, we can have the developed possibility of work conditions. in this paper, we presented the advanced digital timer which has a communication function to control and observe panel to realize control solution based on internet to be easily applicable at workplace with low cost, and we used RS-485 serial communication module to have parallel expansibility and safety. And, this system was experimented and designed for easy system management and status check from remote station through internet. As the result for experiment, the circuit configuration would be more simplified than the existing, and it is expected that multi connection control and monitoring can be simply implemented with low cost equipment at industrial workplace.

• 대한임베디드공학회논문지
• /
• 제13권5호
• /
• pp.225-234
• /
• 2018

Control flow errors are caused by the vulnerability of memory and result in system failure. Signature-based control flow monitoring is a representative method for alleviating the problem. The method commonly consists of two routines; one routine is signature update and the other is signature verification. However, in the existing signature-based control flow monitoring, monitoring target application is tightly combined with the monitoring code, and the operation of monitoring in a single thread is the basic model. This makes the signature-based monitoring method difficult to expect performance improvement that can be taken in multi-thread and multi-core environments. In this paper, we propose a new signature-based control flow monitoring model that separates signature update and signature verification in thread level. The signature update is combined with application thread and signature verification runs on a separate monitor thread. In the proposed model, the application thread and the monitor thread are separated from each other, so that we can expect a performance improvement that can be taken in a multi-core and multi-thread environment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.347_348
• /
• 2009

In this paper, we described the integrated monitoring system for low-voltage panel boards. This system consists of three parts, a panel board controller, an integrated monitoring unit and a remote PC. The panel board controller which was made of CT/PT unit, control unit and power supply is able to transmit variable parameter for monitoring and diagnosis of low voltage branch circuits. Also, the integrated monitoring unit was collected monitoring data from panel boards and displayed on the touch panel.

• 제어로봇시스템학회논문지
• /
• 제14권10호
• /
• pp.1081-1087
• /
• 2008

This paper describes limitations and solutions of the existing processor-monitoring concept for a military supersonics aircraft Flight Control Computer (FLCC) equipped with modern architecture processor to perform the system integration test. Safecritical FLCC integration test, which requires automatic test for thousands of test cases and real-time input/output test condition generation, depends on the processor-monitoring device called Processor Interface (PI). The PI, which relies upon on the FLCC processor's external address and data-bus data, has some limitations due to multi-fetching capability of the modern sophisticated military processors, like C6000's VLIW (Very-Long Instruction Word) architecture and PowerPC's Superscalar architecture. Several techniques for limitations were developed and proper monitoring approach was presented for modem processor-adopted FLCC system integration test.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 춘계종합학술대회
• /
• pp.301-304
• /
• 2003

본 논문은 웹 브라우저 만으로 원격지에 위치한 설비의 모니터링과 제어를 할 수 있고, 서로 다른 시스템간의 호환성과 확장성을 지원할 수 있는 lava 플랫폼을 기반으로 응용 계층인 HTTP 프로토콜의 URL통신을 이용한 인터넷 원격제어 시스템 구축 방법을 제안하였다. 제안한 인터넷 원격제어시스템을 실험하기 위하여 서버 PC와 RS-232 통신방식으로 연결된 $\mu$-Processor를 통한 직류전동기의 속도 및 온도를 모니터링하고 제어하는 실험을 하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1205-1210
• /
• 2004

The 4-20mA analog signal used in the various industrial fields to interface sensor in distributed process control has been replaced with relatively simple digital networks, called "fieldbus, and recently by Ethernet. Significant advances in Internet and computer technology have made it possible to develop an Internet based control, monitoring, and operation scheduling system for heating, ventilation and air-conditioning (HVAC) systems. The seamless integration of data networks with control networks allows access to any control point from anywhere. Field compatible field devices become so-called "smart" devices, capable of executing simple control, diagnostic and maintenance functions and providing bidirectional serial communication to higher level controller. The most important HVAC of BAS has received nationwide attention because of higher portion of more than 40% in building sector energy use and limited resources. This paper presents the Internet-based monitoring and control architecture and development of LonWorks control modules for AHU (air handling units) of HVAC in viewpoint of configuring BAS network. This article addresses issues in architecture section, electronics, embedded processors and software, and internet technologies.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제11권1호
• /
• pp.1-5
• /
• 2011

To enter next process control, numerous approaches, including run-to-run (R2R) process control and fault detection and classification (FDC) have been suggested in semiconductor manufacturing industry as a facilitation of advanced process control. This paper introduces a novel type of optical plasma process monitoring system, called plasma eyes chromatic system (PECSTM) and presents its potential for the purpose of fault detection. Qualitatively comparison of optically acquired signal levels vs. process parameter modifications are successfully demonstrated, and we expect that PECSTM signal can be a useful indication of onset of process change in real-time for advanced process control (APC).