• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 춘계학술대회 논문집 에너지변화시스템부문
• /
• pp.180-182
• /
• 2009

As a train control system becomes a large scale and complex, it is necessary to control rigorously the system requirements specification of the train control system at the early phase. This paper describes Use Cases and activity diagrams of ATS functions requirements in the train control system. Basic functions of the train control system refers to IEC 62290-land are suggested. And the basic functions includes train operation without a driver. It is anticipated that this paper will be helpful for the analysis of ATS functions, ATO functions and EI function in the train control system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2045-2047
• /
• 2001

In this paper, we proposed the representation method of specification and the control rules fork FMS by TPL. To increase productivity and resource utilization, it is desirable to have more active jobs in the system, but the more active jobs there are, the more easily deadlock occur. Therefore, it is very important that the real-time deadlock control to disable deadlock. In this paper, we performed the system modeling by the CROPN(Colored Resource -Oriented Petri Net) and the necessary -sufficient condition check to disable deadlock. We proposed the supervisory control system that can be the real-time monitoring for deadlock free through a necessary-sufficient condition by CROPN modelling, and designed the logic controller of the extended process using TPL.

• 제어로봇시스템학회논문지
• /
• 제9권5호
• /
• pp.354-360
• /
• 2003

For the convenient use of high performance microprocessor in motor control, peripheral devices are needed for converting its control signals to compatible ones for motor drive. Customized devices are not plentiful far these purposes and their functions do not usually satisfied designers specification. The designers used to implement these functions on FPGA or CPLD using hardware description language. Then, in this case unessential programs are needed for control the peripherals. In this paper, a unified device model that links peripheral devices, including especially the pulse width modulation controller and the quadrature encoder interface device, to an interrupt controller is proposed. Advanced functions of peripherals could be achieved by this model and unessential programs can be simplified. Block diagrams and flowcharts are presented to illustrate the advanced functions. This unified device was designed using VHDL. The simulation results were presented to demonstrate the effectiveness of the proposed scheme.

• International Journal of Control, Automation, and Systems
• /
• 제5권6호
• /
• pp.607-613
• /
• 2007

Eigenstructure assignment provides the advantage of allowing great flexibility in shaping the closed-loop system responses by allowing specification of closed-loop eigenvalues and corresponding eigenvectors. But, the general eigenstructure assignment methodologies cannot guarantee stability robustness to parameter variations of a system. In this paper, we present a novel method that has the capability of exact assignment of an eigenstructure which can consider the probability of instability for LTI (Linear Time-Invariant) systems. The probability of instability of an LTI system is determined by the probability distributions of the closed-loop eigenvalues. The stability region for the system is made probabilistically based upon the Monte Carlo evaluations. The proposed control design method is applied to design a flight control system with probabilistic parameter variations to confirm the usefulness of the method.

• 한국전산유체공학회지
• /
• 제6권1호
• /
• pp.40-46
• /
• 2001

Pressure-flow control characteristics of a commercially available cerebrospinal flow(CSF) control shunt valve was studied using flow/structure interaction analyses. Pre-stress of the valve diaphragm(membrane) was accounted for the simulation of an actual valve. The present results were in good agreement with the valve specification listed in the commercially available CSF control valve. The flow/structure interaction analysis of the present study can be effectively used to design a variety of CSF control shunt valves.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
• /
• pp.965-968
• /
• 2003

This paper describes the PWM-VSI controller of three-phase UPS system using stationary reference frame. This controller meets the specification the UPS inverter output voltage even under the unbalanced or nonlinear load. This controller is also constructed with duble control loop of the outer voltage control loop and the inner current control loop. For the fast response of the output voltage control, yhr inner current control loop of the capacitor current os used. To get the good property against overshoot, the If controller us used. The outer voltage controller is designed with P controller and the high gain transfer function is used for the zero steady state error. All control gains of both controller is designed base on the CDM method.

• 품질경영학회지
• /
• 제41권3호
• /
• pp.433-441
• /
• 2013

Purpose: This study investigates software qualification procedures based on the FA-50 flight control software to satisfy high reliability and flight safety. Methods: We studied software qualification categories, standard/specification and developed country case. We proposed procedure to satisfy not only flight safety but also international standard. Results: The proposed software qualification procedure satisfied flight safety and airworthiness based on the testing result of the FA-50 flight control software. Conclusion: This paper showed an appropriate qualification procedures of the flight control software in domestic circumstance through the FA-50 flight control software qualification.

• 약학회지
• /
• 제57권3호
• /
• pp.205-212
• /
• 2013

Dissolution test has been performed to control drug quality and to predict in vivo drug release profile of solid dosage forms, so there's a drift towards setting dissolution test instead of disintegration test. However, some solid dosage forms in Korea Pharmaceutical Codex (KPC) are not established the dissolution test yet, so these monographs are necessary to set the specification of dissolution test. In this study, we developed the specification and test method of dissolution test for itopride hydrochloride tablets and tiropramide hydrochloride tablets which are not established the dissolution test yet. According to the "Manual for Guideline Application for Validation of Analytical Procedures" and "Guidelines on Specification of Dissolution test for Oral dosage form" of Korean Pharmacopoeia (KP), we validated and established each development method. Based on the preliminary dissolution profile, we set the dissolution condition(paddle apparatus, pH 1.2 media, 50 rpm). For this condition, we performed the main dissolution test to determine the specification (45 min, 85%). Finally, we validated each analytical method by specificity, linearity, accuracy and precision. These developed methods will be included the next supplement of KPC and also contributed to the quality control of medicines.

• 생물환경조절학회지
• /
• 제16권4호
• /
• pp.275-283
• /
• 2007

본 연구는 기존 비닐하우스 아연도 강관을 사용한 하우스 폭 3.6m와 5m 천창개폐형 대립계 포도 비가림하우스에 대한 구조적 안전성을 검토하고, 인장강도 $400N{\cdot}mm^{-2}$(SGH400 등) 이상의 파이프를 사용하는 조건에서 하우스 폭 5m인 천창개폐형 대립계 포도 비가림하우스에 대하여 구조적으로 안전한 최적 파이프 규격을 제시하고자 수행하였다. 주기둥 $3m{\times}$서까래 60cm인 천창개폐형 3.6m 비가림하우스의 경우, 적설심 35cm에서는 구조적으로 안전한 것으로 분석되었으나 측면 및 전후면 풍속 $35m{\cdot}s^{-1}$에서는 불안전한 것으로 나타났으며, 동일 주기둥과 서까래 간격을 갖는 천창개폐형 5m 비가림하우스의 경우에는 적설심 35와 풍속 $35m{\cdot}s^{-1}$에서 모두 불안전하여 구조보강이 필요한 것으로 분석되었다. 그리고 동일 주기둥과 서까래간격을 가지나 인장강도 $400N{\cdot}mm^{-2}$ 이상을 갖는 파이프를 사용하는 조건에서 천창개폐형 5m 비가림하우스의 최적 파이프 규격은 지붕높이 1.6m(아치형)와 지붕높이 1.8m(복숭아형)에 대하여 동일하게 두 경우로 규격화 할 수 있었다. 즉, 안전풍속 $35m{\cdot}s^{-1}$와 안전적설심 40cm에서 구조적으로 안전한 서까래 규격은 ${\Phi}31.8{\times}1.5t@600$이었으며, 안전풍속 $35m{\cdot}s^{-1}$와ss 안전적설심 35cm에서는 서까래 ${\Phi}25.4{\times}1.5t@600$인 것으로 분석되었다. 덕면으로부터 곡부보까지의 높이는 안전적설심보다는 안전풍속에 직접적인 영향을 미치는 것으로 분석되었으며, 처마를 높임에 따라 측면풍속에 대해서는 방풍벽파이프(측벽서까래)를, 전후면 풍속에 대해서는 마구리기둥의 규격을 강화하여야 하는 것으로 분석되었다.

• 한국자동차공학회논문집
• /
• 제19권1호
• /
• pp.9-16
• /
• 2011

Research on ISA(Integrated Starter/Alternator) receives wide attention as system voltage is increased to 42V Based on requirement of starter and alternator for the conventional vehicle, system requirement and specification are determined. Also to control proposed system, suitable control methods are proposed. Main control issues with ISA are whether torque assist is required and if so how much torque is needed. In this paper, vehicle performance with various control methods and capacity are simulated and simulation results are analyzed. Vehicle performance is analyzed with vehicle simulator. For the simulation, suitable ISA model is also developed.