• 전기학회논문지
• /
• 제64권1호
• /
• pp.90-98
• /
• 2015

In this paper, an advanced teaching-learning based optimization(TLBO) method for the magnetic levitation controller of Maglev transportation system is proposed to optimize the control performances. An attraction-type levitation system is intrinsically unstable and requires a delicate control. It is difficult to completely satisfy the desired performance through the methods using conventional methods and intelligent optimizations. In the paper, we use TLBO and clonal selection algorithm to choose the optimal control parameters for the magnetic levitation controller. To verify the proposed algorithm, we compare control performances of the proposed method with the genetic algorithm and the particle swarm optimization. The simulation results show that the proposed method is more effective than conventional methods.

• Journal of Power Electronics
• /
• 제11권6호
• /
• pp.811-818
• /
• 2011

Modulation strategies for multilevel inverters have typically focused on synthesizing a desired set of sinusoidal voltage waveforms using a fixed number of dc voltage sources. This makes the average power drawn from different dc voltage sources unequal and time varying. Therefore, the dc voltage sources are unregulated and require that corrective control action be incorporated. In this paper, first two new selections are proposed for determining the dc voltage sources values for asymmetric cascaded multilevel inverters. Then two modulation strategies are proposed for the dc power balancing of these types of multilevel inverters. Using the charge balance control methods, the power drawn from all of the dc sources are balanced except for the dc source used in the first H-bridge. The proposed control methods are validated by simulation and experimental results on a single-phase 21-level inverter.

• 상하수도학회지
• /
• 제26권6호
• /
• pp.915-925
• /
• 2012

On-off control performance of target pumping station was experimented by changing measurement methods for storage level or inflow and operating logic for control system setting. Four scenarios with different measurement methods and operational logic were examined in the Matlab/Simulink environment. Controller's on-off control repetition that was frequent before has been reduced and more effective and stable system operation was found to be possible with the scenarios. Moreover, defensive operation enforced prevention of floods by changing measurement methods enabled economic operation that made an utmost use of storage volumes.

• 한국항공우주학회지
• /
• 제35권2호
• /
• pp.107-114
• /
• 2007

논문에서는 두루미-II 무인기 모델을 이용하여 다양한 조종력 할당 기법의 성능을 평가하였다. 조종력 할당 기법은 먼저 조종면 고장을 고려하지 않은 상태에서 대상 항공기의 기준 비행제어 시스템을 설계한 후, 조종력 할당 알고리즘을 결합하여 구현할 수 있다. 본 논문에서 대상 항공기 모델인 두루미-II 무인기의 기준 비행제어 시스템을 고전제어 기법에 근거하여 설계하였다. 그리고 Psuedo-inverse CA 기법과 Direct CA 기법 및 Optimization CA 기법을 구현하여 두루미-II 무인기의 기준 비행제어 시스템과 결합한 후, 조종면 고장 시나리오에 따른 비선형 시뮬레이션을 통해 각 조종력 할당 기법의 성능을 평가하고 비교하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.183-186
• /
• 2007

This Paper presents a solution to control the Brushless DC Motor(BLDCM) in Hard Disk Drive(HDD) using the Linear Quadratic Regulator(LQR). Generally, The speed of BLDCM in HDD is controlled by the lead angle control or the input voltage control using PAM(Pulse Amplitude Modulation) etc. These control methods have speed overshoot in speed control and need the long time until BLDCM reaches at the steady state. In order to improve the performance, this paper present the PI speed controller using the LQR based on vector control and the rotor position detection methods at the space vector PWM inverter. The proposed methods are proved by the simulation and experimental results.

• 한국정밀공학회지
• /
• 제19권8호
• /
• pp.203-211
• /
• 2002

ABS (Anti-lock Braking System) is a safety device for preventing wheel locking in a sudden braking. It consists of hydraulic modulator, ECU(Electronic Control Unit) and angular velocity sensors. Its control methods are classified into three types; deceleration control, slip ratio control and deceleration/acceleration control. In this paper, ABS mounted vehicle is mathematically modeled and the proposed model is verified by actual cars experiments, and the braking characteristics of the control methods with pulse width modulation are compared and analyzed through computer simulations.

• 대한임베디드공학회논문지
• /
• 제8권4호
• /
• pp.205-212
• /
• 2013

In recent, the demand of Unmanned Aerial Vehicles (UAVs) that can autonomous navigation and remote control has been increased in military, civil and commercial field. Particularly, existing researches focused on autonomous navigation method based on vanish point and remote control method based on event processing in indoor environments. However, the existing methods have some problems. For instance, a detected vanish point in intersection point has too much detection errors. In addition, the delay is increased in existing remote control system for processing images in real time. Thus, we propose improved vanish point algorithm by removing detection errors in intersection point. We also develop a remote control system with android platform by separating flying control and image process. Finally, we compare the proposed methods with existing methods to show the improvement of our approaches.

• 제어로봇시스템학회논문지
• /
• 제13권9호
• /
• pp.875-882
• /
• 2007

In order for a vehicle to follow a predetermined trajectory accurately, its position must be estimated accurately and reliably. In this thesis, we propose trajectory tracking control methods for unmanned vehicle and a positioning system using ultrasonic wave. The positioning problem is an important part of control problem for unmanned navigation of a vehicle. Dead Reckoning is widely used for positioning of vehicle. However this method has problems because it accumulates estimation errors. We propose a new method to increase the accuracy of position estimation using the Ultrasonic Satellite System (USAT). It is shown that we will be able to estimate the position of vehicle precisely, in which errors are not accumulated. And proposed trajectory tracking control methods include both a new path planning method and a lateral control method for vehicle. The experimental results show that the proposed methods enables exact vehicle trajectory tracking even under various environmental factors.

• 대한기계학회논문집
• /
• 제12권6호
• /
• pp.1282-1289
• /
• 1988

본 연구에서는 형태와 특성이 다른 솔레노이드 밸브를 사용한 위치제어 시스 템에 위에서 언급한 두가지 단속적 제어 방법을 적용하여 이들 밸브의 형태와 특성이 시스템의 응답특성에 미치는 영향을 실험적으로 규명하고 실린더 내의 압력 변화에 미 치는 영향도 조사하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1102-1103
• /
• 2007

This Paper presents a solution to control the Brushless DC Motor(BLDCM) in Digital Lightening Processor(DLP) using the Linear Quadratic Regulator(LQR). Generally, The speed of BLDCM in DLP is controlled by the lead angle control or the input voltage control using PAM(Pulse Amplitude Modulation) etc. These control methods have speed overshoot in speed control and need the long time until BLDCM reaches at the steady state. In order to improve the performance, this paper present the PI speed controller using the LQR based on vector control and the rotor position detection methods at the space vector PWM inverter. The proposed methods are proved by the experimental results