• 제목/요약/키워드: Control Loading System

검색결과 529건 처리시간 0.03초

광양만으로 유입되는 질소, 인의 점원 오염부하 특성 (The Characteristic of Point Source Loads for Nitrogen and Phosphorus to Gwangyang Bay, Korea)

  • 김도희;조현서;이영식
    • 한국해양환경ㆍ에너지학회지
    • /
    • 제8권1호
    • /
    • pp.1-8
    • /
    • 2005
  • 2003년 4월부터 12월까지 광양만으로 유입되는 33개 하천과 공장에서 유입되는 질소와 인의 유입 부하랑을 조사하였다. 전체 담수 유입량 중 섬진강, 동천, 주교천, 서천 및 심금교천에서 96% 이상을 차지하며, 섬진강이 51-76%나 차지하고 있었다. DIN유입부하는 7월에 311,173 kg/월로 최대였고, 4월에 61,131 kg/월로 최소로 유입되고 있었다. 하천별로는 DIN의 전체 유입량 중 섬진강이 46-66%를 차지하고 있었다. 다음으로 동천이 1-20%, 덕양천이 12%, 길호천이 4%, 주교천이 5-6%를 차지하고 있었다. 그 외 하천에서는 1% 미만으로 유입되고 있었다. TN의 유입토 7월에 417,733 kg/월로 최대였고, 12월에 119.710 kg/월로 가장 낮게 유입되고 있었으며, 하천별로는 섬진강에서 36-64%로 동천과 함께 7, 8월에 높은 유입 율을 보였으며, 길호천과 덕양천에서는 4, 5월에 높은 유입 비율을 보였다. DIP의 유입은 7월에 」0,533 kg/월로 최대였고, 10월에 1,53 9kg/월로 최소를 보였다. 하천별 DIP의 유입비운은 섬진강이 2-55%로 강우기에 높은 비율을 보인 대신 비강우기에는 생활하수인 남수천에서 8-23 %, 덕양천에서 1-23%, 길호천에서 5-33%로 높은 비율을 보였다. TP의 유입부하는 166,279 kg/월로 7월에 최대였고, 12월에 4,837 kg/월로 최소를 보였으며, 하천별로는 섬진강에서 12-67%로 강우기에 높은 비율을 보였고, 비강우기에는 덕양천과 남수천, 길호천에서 높은 비율을 보였다. 이상의 결과로부터 광양만의 질소와 인의 유입부하를 제어하기 위해서는 먼저 남수천, 덕양천, 길호천의 유입을 그리고 동천과 주교천 및 공장폐수를 제어하는 것이 효과적일 것으로 판단되었다. 유입 하천수 중의 DIN/DIP 원소비는 강우기인 7, 8월에 약 18정도로 낮았고, 비강우피에는 16보다 헐씬 높은 DIN/DIP비를 보였다. 한편, TN/TP 원소비도 7, 8월에 일시적으로 7정도로 낮았고, 비강우기에는 16를 헐씬 상회하는 값을 대부분 보여 질소 보다는 유입수중의 인이 광앙만 해역의 식물플랑크톤의 성장을 제한할 것으로 추정되었다.

  • PDF

Review of Production, Husbandry and Sustainability of Free-range Pig Production Systems

  • Miao, Z.H.;Glatz, P.C.;Ru, Y.J.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제17권11호
    • /
    • pp.1615-1634
    • /
    • 2004
  • A review was undertaken to obtain information on the sustainability of pig free-range production systems including the management, performance and health of pigs in the system. Modern outdoor rearing systems requires simple portable and flexible housing with low cost fencing. Local pig breeds and outdoor-adapted breeds for certain environment are generally more suitable for free-range systems. Free-range farms should be located in a low rainfall area and paddocks should be relatively flat, with light topsoil overlying free-draining subsoil with the absence of sharp stones that can cause foot damage. Huts or shelters are crucial for protecting pigs from direct sun burn and heat stress, especially when shade from trees and other facilities is not available. Pigs commonly graze on strip pastures and are rotated between paddocks. The zones of thermal comfort for the sow and piglet differ markedly; between 12-22$^{\circ}C$ for the sow and 30-37$^{\circ}C$ for piglets. Offering wallows for free-range pigs meets their behavioural requirements, and also overcomes the effects of high ambient temperatures on feed intake. Pigs can increase their evaporative heat loss via an increase in the proportion of wet skin by using a wallow, or through water drips and spray. Mud from wallows can also coat the skin of pigs, preventing sunburn. Under grazing conditions, it is difficult to control the fibre intake of pigs although a high energy, low fibre diet can be used. In some countries outdoor sows are fitted with nose rings to prevent them from uprooting the grass. This reduces nutrient leaching of the land due to less rooting. In general, free-range pigs have a higher mortality compared to intensively housed pigs. Many factors can contribute to the death of the piglet including crushing, disease, heat stress and poor nutrition. With successful management, free-range pigs can have similar production to door pigs, although the growth rate of the litters is affected by season. Piglets grow quicker indoors during the cold season compared to outdoor systems. Pigs reared outdoors show calmer behaviour. Aggressive interactions during feeding are lower compared to indoor pigs while outdoor sows are more active than indoor sows. Outdoor pigs have a higher parasite burden, which increases the nutrient requirement for maintenance and reduces their feed utilization efficiency. Parasite infections in free-range pigs also risks the image of free-range pork as a clean and safe product. Diseases can be controlled to a certain degree by grazing management. Frequent rotation is required although most farmers are keeping their pigs for a longer period before rotating. The concept of using pasture species to minimise nematode infections in grazing pigs looks promising. Plants that can be grown locally and used as part of the normal feeding regime are most likely to be acceptable to farmers, particularly organic farmers. However, one of the key concerns from the public for free-range pig production system is the impact on the environment. In the past, the pigs were held in the same paddock at a high stocking rate, which resulted in damage to the vegetation, nutrient loading in the soil, nitrate leaching and gas emission. To avoid this, outdoor pigs should be integrated in the cropping pasture system, the stock should be mobile and stocking rate related to the amount of feed given to the animals.

환경 인쇄 기술의 발전과 인쇄물의 $CO_2$ 발생량에 관한 연구 (A Study about Development of Environment Printing Technology and $CO_2$)

  • 이문학
    • 한국인쇄학회지
    • /
    • 제30권3호
    • /
    • pp.89-114
    • /
    • 2012
  • For as to world, the concern about the environment problem is enhanced than any other time in the past because of being 21 century. And the environment problem is highlighted as the world-wide issue. The time of the environment problem intimidates the alive of the mankind and presence of an earth over the time. It becomes the essentiality not being selection in the personal living or the economical viewpoint now to prepare for the climatic modification. As to the company management, the green growth period which it excludes the environment management considering an environment, cannot carry on the company the continued management comes. That is, in the change center of the management paradigm, there is the environment management. Nearly, the greenhouse gas which the publication industry is the environmental toxic material like all industries is generated. The greenhouse gas is ejected in the process of running the manufacturing process and print shop of the various kinds material used as the raw material of the book. Particularly, the tree felling for getting the material of the paper is known to reach the direct influence on the global warming. This study does according to an object it considers and organizes the environment parameter based on this kind of fact as to the publication industry. And it is determined as the reference which is used as the basic materials preparing the case that carbon exhaust right transaction(CAP and TRADE) drawing are enforced in all industries and is sustainable the management of the publication industry and reduces the environmental risk among the company many risk management elements and plans and enforces the publication related policy that there is a value. In the printing publication industry, this study tried to inquire into elements discharging the environmental pollutant or the greenhouse gas. Additionally, in the printed publication production process, it tried to inquire into the effort for an environment-friendly and necessity at the printing paper and the printers ink, regarded as the element discharging the greenhouse gas all kinds of the printing materials, operation of the print shop and all kinds of the machines and recycle process, and etc. These considerations make these industrial field employees aware of the significance about a conservation and environmental protection. They try to give a help in the subsequent study producing quantitatively each environmental parameter emission of green house gas. This makes the calculation of the relative $CO_2$ output reproached ultimately possible. Meanwhile, in a sense, many research protects and improving an environment in connection with the contents of research at the printing publication industrial field is in progress. There will be the voluntary human face that it has to protect an environment but this can not do by the outside factor according to all kinds of environment related law and regulation. Anyway, because of acting on company management as the factor of oppression, the increase of this environment-related correspondence cost could know that the research that the environment loading relates with a procurement and development, environment management system introduction, quality control standard, including, normalizing including a material, and etc. through the part of the effort to reduce the cost low was actively in progress. As to the green growth era, as follows, this paper prescribed the subject and alternative of the print publication industry. It is surrounded by the firstly new digital environment and the generation of the subject. And secondly the printing industry is caused by the point of time when the green growth leaves by the topic which is largest in the global industry and it increases. The printing publication industry has to prepare the bridgehead for the environment-friendly green growth as the alternative for this resolution with first. The support blown in each industry becomes the obligation not being selection. Prestek in which the print publishing was exposed to spend many energies and which is known as the practice of the sustainable print publishing insisted that it mentioned importance of the green printing through the white pages in 2008 and a company had to be the green growth comprised through the environment-friendly activity. The core management for the sustainable printing publication industry presented from Presstack white pages is compacted to 4 words that it is a remove, reduce, recover, and recycle. Second, positively the digital printing(POD) system should be utilized. In the worldwide print out market, the digital printing area stops at the level of 10% or so but the change over and growth of the market of an analog-to-digital will increase rapidly in the future. As to the CEO Jeff Hayes of the Infoland, the offset print referred to that it of the traditional method got old and infirm with the minor phase of the new printing application like the customer to be wanted publication and the print of the digital method led the market. In conclusion, print publishers have to grasp well the market flow in the situation where a digitalization cannot be generalized and a support cannot avoid. And it keeps pace with the flow of the digital age and the recognition about the effort for the development and environment problem have to be raised. Particularly, the active green strategy is employed for the active green strategy.

상악 6전치부의 후방견인시 저항중심의 수직적 위치에 관한 3차원 유한요소법적 연구 (The vertical location of the center of resistance for maxillary six anterior teeth during retraction using three dimensional finite element analysis)

  • 이혜경;정규림
    • 대한치과교정학회지
    • /
    • 제31권4호
    • /
    • pp.425-438
    • /
    • 2001
  • 이 연구는 3차원 유한요소법을 이용하여 상악 6전치부에 피질골 절단술을 시행한 경우와 시행하지 않은 경우에서 상악 6전치부를 하나의 단위로 하여 다양한 후방견인력을 가하였을 때 상악 6전치의 초기 치아이동을 통하여 저항중심의 수직적 위치를 계측, 비교하고 저항중심의 변화양상을 관찰하며, 힘의 크기변화에 따른 저항중심의 위치변화양상을 분석하기 위하여 시행되었다. 상악 6전치와 치주인대 및 치조골의 3차원 유한요소모델을 제작한 후, 상악 6전치부에 부착된 설측장치와 이 장치가 부착된 치아군을 한 개의 견고한 연결체로 가정하였다. 유한요소모델에서 사용된 전체요소의 수는 14,584개, 전체 절점의 수는 17,292 개였고, 힘 체계의 분석을 위해 미국 Swanson Analysis System사의 범용 유한요소 프로그램 인 ANSYS(Ver. 5.5A)를 사용하였다. 저항중심은 힘이 가해질 때 치아가 평행 이동될 수 있는 힘의 적용부위라 정의하고, 설측 장치에서 연장된 Extension arm의 7개의 Level에 편측당 각각 200 gm, 250 gm, 300 gm, 350 gm의 설측 후방견인력을 가하였을 때 치아의 절단연과 치근첨에서의 변위를 읽어 평행이동이 일어나는 위치를 복원법으로 계산하여 저항중심의 위치를 계측, 분석하여 다음과 같은 결과를 얻었다. 1. 상악 6전치부의 초기치아이동에서 저항중심의 수직적 위치는 Level 4와 Level 5사이, 즉 치경부에서 치근단 쪽으로 6.76 mm, $44.32\%$ 떨어진 거리에 위치하였다. 2. 피질골 절단술 시행후, 상악 6전치부의 후방 견인시 저항중심의 수직적위치는 Level 4와 Level 5사이, 즉 치경부에서 치근단 쪽으로 7.09 mm, $46.38\%$ 떨어진 거리에 위치하였다. 3. 후방견인력의 크기가 커짐에 따라 치아의 변위량은 커졌으나, 피질골 절단술 시행 유무에 관계없이 후방견인력의 크기변화는 저항중심의 수직적 위치에 별다른 영향을 미치지 않았다. 4. 피질골 절단술 시행시에 저항 중심의 수직적 위치는 치근단 쪽으로 이동하였고, 그 변위량은 피질골 절단술 시행 시가 컸다. 이상의 결과로 볼 때 상악 6전치부 후방견인시 저항중심의 수직적 위치는 치경부에서 치근단 쪽으로 치근길이의 $44.32\%$ 떨어진 거리에 위치하였고, 피질골 절단술 시행시에 저항중심의 수직적 위치는 치경부에서 치근단 쪽으로 치근 길이의 $46.38\%$ 떨어진 거리에 위치하여 피질골 절단술 시행하지 않은 경우보다 치근단 쪽으로 이동되었으며, 후방견인력의 크기 변화에 따라 저항 중심의 수직적 위치는 변하지 않았다.

  • PDF

가열(加熱)·촉매중합법(觸媒重合法)에 의한 목재(木材)·고분자복합체(高分子複合體) 제조(製造)(I) - MMA에 의한 한국산(韓國産) 주요목재(主要木材)의 복합체특성(複合體特性) (On the manufacturing of WPC (Wood Plastic Composites) with Heat-Catalyst Polymerization (I) - On the characteristics of composites made from monomer Methyl MethacryIate and several commercial woods in Korea)

  • 조남석;조재명;안원영
    • Journal of the Korean Wood Science and Technology
    • /
    • 제2권3호
    • /
    • pp.3-16
    • /
    • 1974
  • One of the disadvantages of. wood and wood products is their hydroscopicity or dimensional instability. This is responsible for the loss of green volume of lumber as seasoning degrade. Dimensional stabilization is needed to substantially reduce seasoning defects and degrades and for increasing the serviceability of wood products. Recently, considerable world-wide attention has been drawn to the so-called Wood-Plastic Composites by irradiation-and heat-catalyst-polymerization methods and many research and developmental works have been reported. Wood-Plastic Composites are the new products having the superior mechanical and physical properties and the combinated characteristics of wood and plastic. The purpose of this experiment was to obtain the basic data for the improvement of wooden materials by manufacturing WPC. The species examined were Mulpurae-Namoo (Fraxinus, rhynchophylla), Sea-Namoo (Carpinus laxiflora), Cheungcheung-Namoo (Cornus controversa), Gorosae-Namoo (Acermono), Karae-Namoo(Juglans mandshurica) and Sanbud-Namoo (Prunus sargentii), used as blocks of type A ($3{\times}3{\times}40cm$) and type B ($5{\times}5{\times}60cm$), and were conditioned to about 10~11% moisture content before impregnation in materials humidity control room. Methyl methacrylate (MMA) as monomer and benzoyl peroxide (BPO) as initiator are used. The monomer containing BPO was impregnated into wood pieces in the vacuum system. After impregnation, the treated samples were polymerized with heat-catalyst methods. The immersed weights of monomer in woods are directly proportionated to the impregnation times. Monomer impregnation properties of Cheungcheung-Namoo, Mulpurae-Namoo and Seo-Namoo are relatively good, but in Karae-Namoo, it is very difficult to impregnate the monomer MMA. Fig. 3 shows the linear relation between polymer retentions in wood and polymerization times; that is, the polymer loadings are increasing with polymerization times. Furthermore species, moisture content, specific gravity and anatomical or conductible structure of wood, bulking solvents and monomers etc have effects on both of impregnation of monomer and polymer retention. Physical properties of treated materials are shown in table 3. Increasing rates of specific gravity are ranged 3 to 24% and volume swelling 3 to 10%. ASE is 20 to 46%, AE 14 to 50% and RWA 18 to 40%. Especially, the ASE in relation to absorption of liquid water increases approximately with increase of polymer content, although the bulking effect of the polymerization of monomer may also be influential. WPCs from Mulpurae-Namoo and Cheungcheung-Namoo have high dimensional stability, while its of Karae-Namoo and Seo-Namoo are-very low. Table 4 shows the mechanical properties of WPCs from 6 species. With its specific gravity and polymer loading increase, all mechanical properties are on the increase. Increasing rate of bending strength is 10 to 40%, compression strength 25 to 70%, ;impact bending absorbed energy 4 to 74% and tensile strength 18 to 56%. Mulpurae-Namoo and Cheungcheung-Namoo with high polymer content have considerable high increasing rate of strengths. But incase of Karae-Namoo with inferior monomer impregnation it is very low. Polymer retention in cell wall is 0.32 to 0.70%. Most of the polymer is accumulated in cell lumen. Effective. of polymer retention is 58.59% for Mulpurae-Namoo, 26.27% for Seo-Namoo, 47.98% for Cheungcheung-Namoo, 25.64% for Korosae-Namoo, 9.96% for Karae-Namoo and 25.84% for Sanbud-Namoo.

  • PDF

"무역상무(貿易商務)에의 역사적(歷史的) 어프로치와 무역취인(貿易取引)의 전자화(電子化)" (E-Commerce in the Historical Approach to Usage and Practice of International Trade)

  • 춘홍차
    • 무역상무연구
    • /
    • 제19권
    • /
    • pp.224-242
    • /
    • 2003
  • The author believes that the main task of study in international trade usage and practice is the management of transactional risks involved in international sale of goods. They are foreign exchange risks, transportation risks, credit risk, risk of miscommunication, etc. In most cases, these risks are more serious and enormous than those involved in domestic sales. Historically, the merchant adventurers organized the voyage abroad, secured trade finance, and went around the ocean with their own or consigned cargo until around the $mid-19^{th}$ century. They did business faceto-face at the trade fair or the open port where they maintained the local offices, so-called "Trading House"(商館). Thererfore, the transactional risks might have been one-sided either with the seller or the buyer. The bottomry seemed a typical arrangement for risk sharing among the interested parties to the adventure. In this way, such organizational arrangements coped with or bore the transactional risks. With the advent of ocean liner services and wireless communication across the national border in the $19^{th}$ century, the business of merchant adventurers developed toward the clear division of labor; sales by mercantile agents, and ocean transportation by the steam ship companies. The international banking helped the process to be accelerated. Then, bills of lading backed up by the statute made it possible to conduct documentary sales with a foreign partner in different country. Thus, FOB terms including ocean freight and CIF terms emerged gradually as standard trade terms in which transactional risks were allocated through negotiation between the seller and the buyer located in different countries. Both of them did not have to go abroad with their cargo. Instead, documentation in compliance with the terms of the contract(plus an L/C in some cases) must by 'strictly' fulfilled. In other words, the set of contractual documents must be tendered in advance of the arrival of the goods at port of discharge. Trust or reliance is placed on such contractual paper documents. However, the container transport services introduced as international intermodal transport since the late 1960s frequently caused the earlier arrival of the goods at the destination before the presentation of the set of paper documents, which may take 5 to 10% of the amount of transaction. In addition, the size of the container vessel required the speedy transport documentation before sailing from the port of loading. In these circumstances, computerized processing of transport related documents became essential for inexpensive transaction cost and uninterrupted distribution of the goods. Such computerization does not stop at the phase of transportation but extends to cover the whole process of international trade, transforming the documentary sales into less-paper trade and further into paperless trade, i.e., EDI or E-Commerce. Now we face the other side of the coin, which is data security and paperless transfer of legal rights and obligations. Unfortunately, these issues are not effectively covered by a set of contracts only. Obviously, EDI or E-Commerce is based on the common business process and harmonized system of various data codes as well as the standard message formats. This essential feature of E-Commerce needs effective coordination of different divisions of business and tight control over credit arrangements in addition to the standard contract of sales. In a few word, information does not alway invite "trust". Credit flows from people, or close organizational tie-ups. It is our common understanding that, without well-orchestrated organizational arrangements made by leading companies, E-Commerce does not work well for paperless trade. With such arrangements well in place, participating E-business members do not need to seriously care for credit risk. Finally, it is also clear that E-International Commerce must be linked up with a set of government EDIs such as NACCS, Port EDI, JETRAS, etc, in Japan. Therefore, there is still a long way before us to go for E-Commerce in practice, not on the top of information manager's desk.

  • PDF

상향류 인 결정화공정을 이용한 슬러지 발효 유출수로 부터의 영양소 회수 (Nutrient Recovery from Sludge Fermentation Effluent in Upflow Phosphate Crystallization Process)

  • 안영호
    • 대한환경공학회지
    • /
    • 제28권8호
    • /
    • pp.866-871
    • /
    • 2006
  • 연속 회분식 방식의 실험실 규모 상향류 반응조를 사용하여 인 결정화공정을 이용한 영양물질 회수에 대한 연구를 수행하였다. 양이온 공급원으로서 산업폐기물인 폐석회와 마그네슘염을 이용하여 그 운전특성을 비교하였다. 이 연구는 고성능 발효조와 인 결정화 반응조로 구성된 새로운 통합 슬러지 처리 공정에 있어서 인 결정화공정의 성공적인 적용성 평가에 초점을 두고 있다. 발효조 유출수와 유사한 특성으로 제조된 합성폐수를 이용한 첫 번째 struvite 결정화 실험에서 반응은 $0.5{\sim}1$ hrs 사이의 반응시간에서 빠르게 진행되었는데, 그 동안 상당량(약 60% 이상)의 암모니아와 인이 제거되었다. 알칼리성 조건이라는 기질의 고유특성으로 인하여 암모니아 탈기 현상이 다소 발생하였으나 그 정도는 미미한 것(<5%)으로 나타났다. 또한 공기주입에 의한 이산화탄소 탈기조건을 추가적으로 제공하였을 때 struvite 형성속도의 향상은 일어나지 않았다. 실폐수로서 발효조 유출수를 사용한 두 번째 실험에서 stuvite 결정화를 위한 마그네슘염의 최적주입량은 struvite형성질량비와 유사한 0.86 g Mg $g^{-1}$ P이었다. 반면에 폐석회의 최적주입량은 0.3 g $L^{-1}$으로 다소 높게 나타났으며, 약 3시간의 반응시간 조건에서 $NH_4$-N과 $PO_4$-P의 제거효율은 각각 80%와 41%로 나타났다. 각 실험에서 침전물을 현미경으로 분석한 결과 마네슘염을 사용한 경우 프리즘과 같은 결정체가 관찰된 반면 폐석회를 사용한 경우는 비결정질의 결정체가 주로 관찰되었다. 하수처리용량 158,880 $m^3\;d^{-1}$의 실규모 처리시설의 경우를 대상으로 한 통합 슬러지처리시스템의 물질수지 분석결과 결정화 반응조 유출수로 부터의 반송되는 영양물질의 재순환 부하(각각 하수 1 $m^3$ 당 0.13 g N와 0.19 g P)는 매우 낮게 유지되는 것으로 나타났다. 그러므로 이미 산업폐기물 형태로 존재하는 폐석회를 본 연구에서와 같이 통합 슬러지 처리시스템의 영양물질 회수 공정에서 재이용하는 것은 높은 환경적 및 경제적 이익과 동시에 산업폐기물의 지속발전적 처리/처분이라는 다양한 장점을 가질 것이다.

열대지역(熱帶地域)에서 농산폐유기물(農産廢有機物)을 원료(原料)로한 멘탄가스발생(發生) (Biogas Production from Agricultural Wastes and Residues in Tropical Region)

  • 주영희;전용운
    • 한국토양비료학회지
    • /
    • 제18권4호
    • /
    • pp.325-335
    • /
    • 1985
  • 농산폐유기물(農産廢有機物)을 원료(原料)로한 메탄가스시설(施設)을 Philippine소재(所在) 국제미작연구소(國際米作硏究所)에 설치(設置)하여 가스발생량(發生量 ) 시험(試驗)을 한 결과(結果)는 다음과 같다. 1. 원료(原料) 자원별(資源別) 메탄가스발생량조사(發生量調査) 가. 볏짚, 왕겨, 옥수수줄기 및 야자수열매껍질은 분요혼합(糞尿混合)으로 가스발생량(發生量)이 증대되었음. 나. 야자수열매껍질을 1주일(週日) 호기발효(好氣醱酵)시킨후(後) 메탄발효원(醱酵源)으로 활용(活用)한 결과(結果)는 무처리(無處理)에 비(比)하여 가스발생량(發生量)이 증대되었음. 다. 볏짚을 메탄발효원료(醱酵原料)로 활용(活用)한 결과(結果) 전처리(前處理)한 볏짚에 비(比)해 가스발생량(發生量)이 증대되었으며 발생기간(發生期間)도 연장(延長)되었음. 라. 질소함량(窒素含量)이 높은 Azolla는 분뇨대신(糞尿代身) 메탄발효원(醱酵源)으로 활용(活用)이 가능(可能)하였음. 마. 메탄발효액(醱酵液)의 pH 6이하(以下)에서는 가스발생(發生)이 어려웠음. 2. 취사용(炊事用) 매탄가스시설(施設) 가스발생기간(發生期間) 연장시험(延長試驗) 가. 볏짚괴(塊)(Compact straw)분뇨혼합처리(糞尿混合處理)는 볏짚 (Loose straw)분뇨혼합처리(糞尿混合處理)에 비(比)하여 원료(原料) 투입(投入) 및 제거작업(除去作業)이 용이(容易)하였으나 가스발생량(發生量)이 다소(多少)낮았음. 나. 볏짚분뇨(糞尿)를 혼합(混合)하여 메탄발효(醱酵)시킨 결과(結果), 6인가족(人家族) 취사이용(炊事利用)이 가능(可能)한 가스는 70일(日) 발생(發生)되었음. 다. 발효조(醱酵槽)를 지하(地下)에 매설(埋設)하고 그늘시설(施設)을 한 결과(結果) 발효액온(醱酵液溫)이 일정(一定)하게 유지(維持)되어 가스발생량(發生量)이 증대되고 발전기간(發全期間)도 연장(延長)되었음. 3 경제성분석(經濟性分析) 가. 3,600Kcal로 환산한 메탄가스 생산비용(生産費用)은 0.14불(弗)/$m^3$로 같은 열량(熱量)인 LPG 0.54불(弗)/kg, 석유(石油) 0.32불(弗)/kg보다 낮았음. 나. 메탄발효(醱酵)로 유기질비료생산(有機質肥料生産), 공해방지(公害防止) 및 가스사용(使用)이 편리(便利)한 점(點)을 감안한다면 메탄가스는 타연료(他燃料)에 비(比)해 가장 유효한 대체(代替)에너지임.

  • PDF

자동차 조립 작업자들에서 상지 근골격계의 인간공학적 작업평가(Rapid Upper Limb Assessment) 결과와 자각증상과의 연관성 (The Relation Between Work-Related Musculoskeletal Symptoms and Rapid Upper Limb Assessment(RULA) among Vehicle Assembly Workers)

  • 김재영;김해준;최재욱
    • Journal of Preventive Medicine and Public Health
    • /
    • 제32권1호
    • /
    • pp.48-59
    • /
    • 1999
  • 본 연구는 Rapid Upper Limb Assessment(RULA)를 이용하여 자동차 조립작 업에 대한 인간공학적 작업평가를 하고, 이 결과와 작업관련 상지 근골격계 질환의 자각증상율 및 작업특성 변수들의 연관성을 분석함으로써, RULA결과가 관련 신체부위의 통증이나 불편함으로 보고되는 근골격계 부하의 좋은 지표가 될 수 있는지, RULA평가체계를 이용하여 작업 위험도가 적합한지 여부를 평가할 수 있는가를 보고자 하였다. 자동차 제조업 작업자 314명을 대상으로 근골격계질환 자각증상설문과 RULA를 이용한 작업평가를 하였으며, 다음과 같은 결과를 얻었다. 1. NIOSH의 작업관련 근골격계 질환의 감시기준(surveillence criteria)에 따라 자각증상을 조사한 결과, 연구대상자 중 목 32.8%, 어깨 26.4%, 팔 10.5%, 손 29.3%, 허리 41.4%였으며, 한가지 이상 의 증상을 보이는 경우는 62.4%의 분포를 보였다. 2. 품질관리부에 비해 조립부서 작업자 틀이 전체 증상과 어깨, 허리, 팔 및 손부 위 증상에서 더 높은 유증상률을 보였다(p<0.05). 3. 부서별 RULA를 이용한 작업평가 결과, 서브/조립반과 의장반의 공정이 높은 위험점수를 보였다. 전체 조립부서에 대한 평가결과 적합한 작업은 3.02%였고, 62.8%가 부적합한 작업으로 작업전환이나 중재조치가 필요한 경우였다. 자각증상과 RULA를 이용한 작업평가 결과를 비교한 결과 RULA점수가 클수록 자각증상율이 높음을 보였다.(p<0.05) 4. RULA평가지표와 자각증상사이의 관련성을 보기 위하여, RULA지표와 기타 작업관련요인들을 독립변수로, 자각증상유무를 종속변수로 하여 다중 로지스틱 회귀분석을 실시하였다. 최종적으로 증상유무를 가장 잘 설명하는 회귀모형에 대한 분석결과는 다음과 같다. 모든 증상군에 대해서는 반복작업(OR 2.183), 진동공구 사용(OR 2.775)과 총 위험도 점수(OR 2.250); 목 부위 증상군에서는 상완의 자세점수(OR 1.786), 상완 및 손부 위의 총점수(OR 1.634) ; 어깨 증상군은 상지의 근사용(OR 3.076), 상완 및 손부 위의 총점수(OR 1.798); 어깨와 목 부위를 합한 증상군은 상완 및 손부위의 총점 수(OR 1.715)와 상지의 근사용 점수(OR 2.057); 팔 증상군에서는 상지의 근사용 점수(OR 10.662) ; 손 부위 증상군에 대해서는 손목의 자세/손목 비틀림 지표 (OR 2.068)와 상지의 근사용 점수(OR 2.215); 허리부위 증상군에서는 하지의 근사용 점수(OR 2.601)가 통계적으로 유의한 지표였다.(p<0.05) 이상의 결과에서 작업관련 상지근골격계 자각증상과 RULA 점수사이에는 연관성이 있음이 관찰되었다. 이는 RULA가 직업성 질환을 유발할 수 있는 근골격계 부하에 폭로된 작업자들을 평가하는, 일차적인 작업 위험도 평가도구(Screening tool)로서 쓰일 수 있음을 말해준다. 다만 향후 RULA 사용에 있어서 상지(upper limb)와 허리부위(back)의 평가를 구분하고, 기타 다른 작업관련 요인들에 대한 평가체계를 보완하는 것이 필요하다.

  • PDF