• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1266-1266
• /
• 2001

Pasture composition, an important attribute determining sward condition and value, is normally assessed by hand separation, drying and measuring weight contribution of each species in the mixture. This is a tedious, time and labour consuming procedure. NIRS has demonstrated the potential for predicting botanical composition of swards, but most of the work has been carried out on dry samples. The aim of this work was to evaluate the feasibility of developing NIR models for predicting the white clover and ryegrass content in fresh or dry mixtures artificially prepared from pure samples of both species. Mixtures from pure stands of white clover(Trifolium repens) and perennial ryegrass (Lolium perenne) were prepared with different proportions (0 to 100%) of each species (fresh weight). A total of 55 samples were made (11 mixtures,5 cuts). Spectra (400 to 2500 nm) were taken from fresh chopped (rectangular cuvettes, transport sample module) samples, in a NIR Systems 6500 scanning monochromator controlled by the software NIRS 3 (Infrasoft International), which was also utilized for calibration development. Different math treatments (derivative order, subtraction gap and smooth segment) and a scatter correction treatment of the spectra (SNV and Detrend) were tested. Equations were developed by modified partial least squares. Prediction accuracy evaluated by cross-validation, showed that percentage of clover or ryegrass, as contribution in dry weight, can be successfully percentage of clover or ryegrass, as contribution in dry weight, can be successfully predicted either on fresh or dried samples, with equations developed by different math treatments. Best equations for fresh samples were developed including a first, second, or third derivative, whereas for dry samples best equations included a second or third derivative. Standard errors of ross validation were about 6% for fresh and 3.6% for dry samples, Coefficient of determination of cross validation (1-VR) were over 0.95 times the value of SECV for fresh samples and over 8 times the value of SECV for dry samples. Scatter correction (SNV and Detrend) in general improved prediction accuracy. It is concluded more precise on dried and ground samples, it can be used with an acceptable error level and less time and labour, on fresh samples.

• Journal of the Korean Home Economics Association
• /
• v.30 no.1
• /
• pp.283-309
• /
• 1992

This study examines work and family life of married women employed in a manufacturing industry. Data were gathered from the use of fact-to-face interview method from a sample of 230 married working women. The major findings of this study can be summarized as follows : (1) With high rates of change of job, most of the respondents remain unstable in their working situation. It was shown that the important factors influencing job satisfaction of married women are women's life cycle, degree of contribution of wife's income toward total family income, and husband's attitude toward wife's empolyment. The degree of job satisfaction is also strongly influenced by labor structural factors such as pay, work environment and fringe benefits. (2) The amount of household labor time was limited by job-related factors rather than by family-related factors, because among these working women employment itself is necessarily for their subsistance. (3) It was shown that wives participated more actively in their marital communications than their husbands. Most of the respondents showed the syncratic type of the decision making patterns, but this results does not necessarily mean wives exercised an equal power with their husbands. The economic factors and the emotional instability of the husband are the ones mostly influencing marital conflicts of the employed women. It was found that the respondents easily revealed marital conflicts related to personal problems of their husbands(such as extramarital affairs, gambling and alchoholism). However, they tried to overcome the structural conflicts related to authoritarian attitudes of their husbands or economic problems without any complaints. (4) Mothers have difficulty in controlling their adolescent children, due to the weakening of parental authority. Although most of the respondents perceived their employment as having negative impacts on their children, they still have high expectations toward their children. Inspite of low degree of father role expectations and facther role performance of their husbands, most of the respondents anticipated expressive roles as well as traditionally instrumental role from their husbands. Finally, these findings would help us determine family welfare policies in Korea. Improvements in paid and household labor structure of married women should be accomplished at the national level. Also, the acting programs for parent education, marital councelling services, and law enforcement for equal employment between men and women should be provided in our society.

• Journal of Ecology and Environment
• /
• v.48 no.1
• /
• pp.1-7
• /
• 2024

Background: Available publications (e.g., theses, scientific reports, books and papers) about the elements of the Egyptian biodiversity during 2000-2018 were collected in a progress scientific report. The publications reported in this bibliography were collected from various sources including: site of the Egyptian Universities Libraries Consortium Portal, accounts of the biodiversity specialists on Research gate, direct contact with the national experts of the Egyptian biodiversity, libraries of some universities and research centers and others. The elements of the Egyptian biodiversity are classified into different categories. Results: Up till now, a total of 20,521 species were recorded in Egypt, of which insects have the highest contribution (48.7%), followed by fungi (12.1%) and vascular plants (11.5%). In a descending order, each of amphibians, viruses, reptiles, mammals, cyanobacteria, bryophytes, and bacteria have a minor contribution (< 1%). Based on the available data, Egyptian biodiversity contributes 1.3% of the world biota, although its area contributes only 0.7% of the world area. At a global scale, the most represented groups are algae (12.22% of the world figure), followed by cyanobacteria (6.08%) and birds (4.70%). On the other hand, the less represented are amphibians (0.14% of the world figure), flora (0.84%) and insects (1.00%). Conclusions: Some suggestions are recommended for preparing a phytoplankton checklist based on the rich available publications; further studies should be carried out on the lichen biodiversity in order to prepare acceptable verified checklist for this important group. In addition, paleo-biologists should work together to publish a book dealing with the Egyptian paleo-biology, such studies will lead to high ranking the Egyptian biodiversity.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.2
• /
• pp.50-60
• /
• 2018

Recently, modular construction method has been widely applied to projects with repetitive processes including dormitory, the residential facility, and the hotel construction due to reduced labor input and shortened construction schedule. Generally, about 40% of total on-site construction cost excluding unit installation cost, is put on exterior finishing work, and thus management of finishing work is deemed important in maintaining the targeted schedule and cost. Since limited equipment is shared so that subsequent activities are not affected while carrying out on-site installation and finishing work, lifting plan becomes more important for modular projects with greater portion of finishing work load. In this regard, tower crane operation plan may take the form of a single cycle or multiple cycles in which equipment efficiency can be affected. However, difficulties exist in evaluating alternatives to tower crane operation plans supporting unit installation and finishing work. Therefore, this study aims to evaluate the alternative of tower crane operation method according to the cyclic period setting in modular building site to determine the effect on T/C uptime and process by parameterizing lifting time for unit and exterior finishing material, lift cycle for unit and exterior finishing material and time required for finishing work. Accordingly, this study develops a simulation model that can increase the tower crane efficiency by controlling the work speed. An academic contribution of this study is to suggest a resource leveling method applying the concept of lifting cycle, and further is expected to be managerially used as a basis for an alternative evaluation of equipment plan.

• Steel and Composite Structures
• /
• v.37 no.5
• /
• pp.533-549
• /
• 2020

Recently, Concrete-filled double skin steel tubular (CFDST) columns have proven an exceptional structural resistance in terms of strength, stiffness, and ductility. However, the resistance of these column members can be severely affected by the type of loading in which bending stresses increase in direct proportion with axial load and eccentricity value. This paper presents a non-linear finite element based modeling approach that studies the behavior of slender CFDST columns under biaxial loading. Finite element models were calibrated based on the outcomes of experimental work done by other researchers. Results from simulations of slender CFDST columns under axial loading eccentric in one direction showed good agreement with the experimental response. The calibrated models are expanded to a total of thirty models that studies the behavior of slender CFDST columns under combined compression and biaxial bending. The influences of parameters that are usually found in practice are taken into consideration in this paper, namely, eccentricity-to-diameter (e/D) ratios, slenderness ratios, diameter-to-thickness (D/t) ratios, and steel contribution ratios. Finally, an analytical study based on current code provisions is conducted. It is concluded that South African national standards (2011) provided the most accurate results contrasted with the Eurocode 4 (2004) and American Institute of Steel Construction (2016) that are found to be conservative. Accordingly, correction factors are proposed to the current design guidelines to provide more satisfactory results.

• Journal of Korean Clinical Nursing Research
• /
• v.20 no.2
• /
• pp.162-176
• /
• 2014

Purpose: The purpose of this study was to perform an operating room nursing activities analysis and estimate nursing intensity of each nursing activity based on the Relative Value Scale (RVS). Methods: The methodology for this study of RVS was based on the work of Hsiao et al. The first stage was to identify nursing activities and the second to measure intensity of nursing activities including technical skill, mental effort, and stress. Results: Calculation of the RVS for 99 nursing practices showed a score range from 300.00 to 1337.78. CS operation assistant, OS operation assistant, and obtaining certification had high nursing intensity. Surgical hand washing, putting on surgical gowns, surgical gloves and surgical caps and mask had low nursing intensity. Conclusion: The activities of operating room are not compensated separately but reimbursement is usually included in physician fees. In the future, an estimation of nursing cost should show the nursing contribution rate to total operation revenue.

• Journal of Marine Bioscience and Biotechnology
• /
• v.3 no.1
• /
• pp.42-47
• /
• 2008

Sudan is the largest country in Africa with an area of $2,505,810km^2$, of water constitutes $129,810km^2$, and cultivable land is 34%. Sudan has a total land boundary of 7,687 km with 9 border countries. This vast country embraces different vegetation patterns reflecting various climatic zones, grading from tropical rain forests in the south through semi-tropical savannah to arid zone in the extreme north, with annual rainfall ranging from 1,600 mm in the south to 25 mm in the north. The aquaculture industry is not developed as yet. Because of their basic characteristics, the Sudan inland and marine capture fisheries are of a small-scale and semi-industrial nature. The demand for fish and fish preparations is growing steadily. The animal resources sector (which includes fisheries) contributes 21% of Sudan GDP. The contribution of fisheries to Sudanese GDP is currently marginal. The per caput supply is only 1.6 kg/year, which is mostly obtained by capture fish landings. Despite the fact that fisheries GDP is extremely low, fish and fish preparations contribute to the food security of a wide sector of the rural and urban communities. Fisheries also provide work opportunities in the form of secondary employment as a source of income that indirectly contributes to household food security.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.6
• /
• pp.1674-1683
• /
• 2016

In this paper, a Finite Control Set Model Predictive Control (FCS-MPC) for a five level cascaded multilevel inverter (CMLI) with reduced switch topology is proposed. Five switches are used here instead of conventionally used eight switches. The main contribution of this paper is to make the MPC controller work for the reduced switch topology using only 19 voltage vectors in place of conventional 61 voltage vectors for a five level CMLI. This simplifies the execution of the MPC algorithm, paving a way for the significant reduction in the computational time. The controller makes use of the excellent ability of MPC to multitask, by adding one more objective which is to reduce the average switching frequency in addition to controlling the load current. This is especially important, since switching losses and therefore switching frequency is significant for high-power applications. The trade-off of this MPC is that the current is not as smooth as the 61 vector scheme, but well within the limits of IEEE standards. The results shown prove that this MPC works well in steady state and dynamic conditions too.

• Advances in materials Research
• /
• v.4 no.1
• /
• pp.13-22
• /
• 2015

Concrete suffers strength loss when subjected to elevated temperatures during an accidental event such as fire. The loss in strength of concrete is mainly attributed to decomposition of C-S-H gel and release of chemically bound water, which begins when the temperature exceeds $500^{\circ}C$. But it is unclear about how much strength loss occurs in different stages of heating, retention and cooling regimes. This work is carried out to separate the total strength loss into losses during different stages of heating, retention and cooling. Tests were carried out on both Ordinary Portland Cement (OPC) based concrete and Ground Granulated Blast Furnace Slag (GGBFS) blended concrete for $200^{\circ}C$, $400^{\circ}C$, $600^{\circ}C$ and $800^{\circ}C$ with a retention period of 1 hour for each of these temperature levels. Furnace cooling was adopted throughout the experiment. This study reports strength loss contribution during heating, retention and cooling regimes for both OPC based and GGBFS based concretes.

• Journal of Radiation Protection and Research
• /
• v.12 no.2
• /
• pp.37-50
• /
• 1987

The exposure of the population in the United States to ionizing radiation has recently been evaluated by the National Council on Radiation Protection and Measurements (NCRP). This was done by constituting six organizational groups to address various phases of the work and the results of this work are summarized in this article. The article is based on the report, by the same title, which is scheduled for publication by the NCRP in September, 1987. The six organizational groups are titled Radiation Exposure from Consumer Products, Natural Background Radiation, Radiation Associated with Medical Examinations, Radiation Received by Radiation Employees, Public Exposure from Nuclear Power, and Exposure from Miscellaneous Environmental Sources. These titles are descriptive of the subject areas covered by each of these separate groups. The data evaluated are for the years 1977-1984 with the majority of the data being for the period 1980-1982. Summary information is presented and discussed for the number of people exposed to given sources, the effective dose equivalent, the average effective dose equivalent to the U.S. population, and the genetically significant dose equivalent. The average annual effective dose equivalent from all sources to the U.S. population is approximately 3.6 mSv (360 mrem). Exposures to natural sources make the largest contribution to this total. Radon and radon decay products contribute 2.0 mSv (200 mrem) whereas the other naturally occurring radionuclides contribute 1.0 mSv (100 mrem). Among man-made or enhanced sources, medical exposures make the largest additional contributions, namely 0.39 mSv (39 mrem) for diagnosis and 0.14 mSv (14 mrem) for nuclear medicine. It was not possible to evaluate exposures for therapy. Most of the other sources of population exposure, including nuclear power and consumer products, are minor. A possible exception would be the use of tobacco products. These exposures are discussed in relation to a negligible individual risk level of $10{\mu}Sv/y$ (1 mrem/y). The NCRP considers exposures below the negligible individual risk level as trivial and as such should be dismissed.