• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 추계학술대회 논문집
• /
• pp.375-381
• /
• 2004

Recently, the evolution in production techniques (e.g. high-speed milling) and the complex shapes involved in modem production design has been increasingly popular. The key to the achievement is a drastic improvement of the dynamic behavior of the machine tool axes used in production machinery. The more complex these tool paths the higher the speed and acceleration requirements. But it is very difficult to reach the target for high speed machine tool because of the limitations of servo system and motion control system. However the direct drive design of machine tool axes, which is based on linear motors and which recently appeared on the market, is a viable candidate to meet the ever increasing demands, because of these advantages such as no backlash, less friction, more mechanical simplicity and very higher acceleration and velocity comparing to the traditional system. This paper focused on the performance tests of the high speed horizontal machine tool based on linear motor. Especially, dynamic characteristics were investigated through circular test and circular form machining test is carried out considering many important parameter. Therefore these several experiments is used to be evaluated the model for prediction of circular motion error and circular machined error.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제50권8호
• /
• pp.361-366
• /
• 2001

This thesis proposes a fuzzy logic cross coupled controller for a multi axis servo system. The overall control system consists of three elements: the axial position controller, the speed controller, and a fuzzy logic cross coupled controller. In conventional multi axis servo system, the motion of each axis is controlled independently without regard to the motion of other axes, in which the contour error, defined as the shortest distance between the desired and actual contours is compensated only by the position error of each axis. This decoupled control approach may result in degraded contouring performance due to such factors as mismatch of axial dynamics and axial loop gains. In practice, such systems contain many uncertainties, Therefore, the multi axis servo system must receive and evaluate the motion of all axes for a better contouring accuracy. Cross coupled controller utilizes all axis position error information simultaneously to produce accurate contours. However the existing cross coupled controllers cannot overcome friction, backlash and parameter variation. Also, since it is difficult to obtain an accurate mathematical model of multi axis system, here we investigate a fuzzy logic cross coupled controller method. Some simulations and experimental results are presented to illustrate the performance of the proposed controller.

• Archives of Plastic Surgery
• /
• 제32권1호
• /
• pp.105-109
• /
• 2005

Perineal area is composed of compact structures of urogenital organs and anus requiring a more sophisticated selection of flap and reconstruction. For achieving better outcome then conventional flap surgery, we use the perineal perforator based island flap for its reconstruction. After locating the perforator by Doppler, the flaps were designed according to the defect or expected vaginal orifice. The flaps were elevated bilaterally as island pattern. Finally defect or neovagina was reconstructed with inconspicious linear scar hidden in the inguinal crease. Five cases were performed with the perineal perforator based island flap. There were 3 cases of vulvar cancer, 1 case of transsexualism, and 1 case of ambiguous genitalia because of congenital adrenal hyperplasia. Operative results were satisfactory with good contouring and less prominent donor scar, when they were compared with other flap reconstructions such as latissimus dorsi perforator flap, groin flap, gracilis myocutaneous flap etc. The perineal perforator based island flap is highly recommended with the advantages of easy flap elevation, good rotation arc, and appropriate flap thickness for contouring. Compared with other conventional flaps, it can be selected as a good option for moderate defect of perineal area.

• 한국정밀공학회지
• /
• 제26권12호
• /
• pp.55-61
• /
• 2009

Machining systems have been evolved to produce more detailed products of high added value. This has been possible, in large part, due to the development of highly accurate multi-axis CNC machine tools. The conventional CNC of machine tools has individual axis controllers to maximize tracking performance. On the other hand, cross-coupling controllers can be integrated into the conventional CNC to enhance contouring performance. For this multi-axis cross-coupling control system, it is necessary to automatically adjust the controller gains depending on operating conditions and/or other external conditions from an optimization perspective. This paper proposes automatic modeling of feed drive systems that minimizes the difference in behavior between the system model and the actual system. Based on the modeling, an integrated auto-tuning method is also proposed to improve both tracking and contouring accuracy of a 3-axis cross-coupling control system as well as users' convenience. The proposed methods are evaluated by both simulation and experiments.

• 대한조선학회논문집
• /
• 제52권1호
• /
• pp.70-76
• /
• 2015

The ship hull is accomplished by assembling various curved surfaces. There are numerous existing methods for ship hull processing, which need certain appropriate processing methods to enable it to be more efficient. The curved hull plates can be divided into convex region and saddle region. It is common to use line heating method to form a saddle region, when it comes to a convex region, it will be triangle heating method to be utilized. A precise analysis for curvature domain is required for the application of proper processing method. There exist various problems on existing calculation methods of curvature domain. Therefore, a more powerful method is demanded to it more accurately. In this study, a method called Dual Contouring is applied to extract curved surfaces, which is able to improve accuracy of extracted area. Based on all above, a best-suited heat processing method should be selected.

• 대한두개안면성형외과학회지
• /
• 제15권3호
• /
• pp.129-132
• /
• 2014

Facial skeletal remodeling was revolutionized more than 30 years ago, by the work of Tessier and other craniofacial surgeons. However, the need to correct the skeleton in the upper third of the face is not frequently diagnosed or treated in aesthetic facial surgery. Here, we report on the aesthetic correction of a protrusive forehead. A patient visited our hospital for aesthetic contouring with a prominent forehead. The anterior wall of the frontal sinus was removed with a craniotome via the bicoronal approach. After the excised bone was repositioned, it was fixed with a titanium mesh plate and screws. An electric burr was used to contour the supraorbital rim and frontal bone. Once the desired shape was achieved, the periosteum was replaced, and the wound was closed in layers. When performed properly, frontal sinus contouring could significantly improve the appearance in patients with a prominent forehead. Plastic surgeons must carefully evaluate patients with a prominent forehead for skeletal remodeling that involves the accurate and safe repositioning of the anterior wall of the frontal sinus.

• 대한치과의사협회지
• /
• 제58권2호
• /
• pp.103-113
• /
• 2020

Background: Reduction malarplasty is one of the most popular facial contouring surgeries in east Asia for making patients' faces smaller. Currently in Korea, reduction malarplasty surgeries are performed mostly at plastic surgery clinics, but few cases are done at oral and maxillofacial surgery clinics. The reason might be because of post-operative complications after reduction malarplasty, such as undercorrection, overcorrection, asymmetry, cheek drooping, malunion, pain and noise. Those complications should be uneasy to be handled by oral and maxillofacial surgeons, however, they can be prevented by knowing the effective and safe reduction malarplasty techniques. Therefore, in this article the author as an oral and maxillofacial surgeon, would like to suggest safe and effective surgical methods for reduction malarplasty customized for Korean patients. Method: L- shape osteotomy of zygomatic body was performed with intraoral approach via vestibular incision, and the zygomatic arch was osteotomized with extraoral approach via sideburn incision. Then zygomatic complex was separated and rotated mesio-superiorly without removal of a bony strip and fixed with miniplates and microplates without making a bony gap. Conclusion: Surgical results were favorable and satisfied by the patients without cheek drooping, malunion, undercorrection and asymmetry.

• 대한두개안면성형외과학회지
• /
• 제25권1호
• /
• pp.38-43
• /
• 2024

Cherubism is a rare fibro-osseous condition characterized by bilateral expansion of the mandible and maxilla. Due to its rarity, treatment guidelines for cherubism have not been clearly established. Observation without surgical intervention is typically recommended, as cherubism often regresses spontaneously after puberty. However, a surgical intervention may be necessary if aggressive lesions lead to severe complications. In this report, we present a case involving surgical management of cherubism that did not spontaneously regress until early adulthood. An 18-year-old man was diagnosed with cherubism, presenting characteristic upward-looking eyes and a swollen face. He strongly desired surgical management. Gross contouring of the mandible was performed using an osteotome. Subsequently, delicate contouring was performed by bone burring and curettage. The remaining multiple locular bony defects were filled with demineralized bone matrix. No major complications, including infection and hematoma, occurred during the 8-month follow-up period. The facial contour remained stable without the aggravation of cherubism. The patient was satisfied with the cosmetic results. Considering that cherubism is a rare disease globally, with few reported cases in Korea, and that treatment guidelines are not clearly established, we anticipate that the results of this case will contribute to the development of future protocols for treating cherubism.

• Archives of Plastic Surgery
• /
• 제37권5호
• /
• pp.681-686
• /
• 2010

Purpose: Obese proportion is increasing universally, estimating more than a billion. So reducing the weight became one of the topic in medical market. Not only diet, exercise, medication, but also many surgical procedures are being developed, such as sleeve gastrectomy, gastric bypass surgery. After massive weight loss, skin excess and laxity occurs, leading to unsatisfying body contour. Body contouring surgery including abdominoplasty, breast reduction is performed when skin excess is present in abdomen and breast. When skin excess is present circumferentially, belt dermolipectomy is the treatment of choice. Methods: A 23-year-old man had weight gain since he was 12 of age. A year before visiting to our department, his height was 168 cm, weight was 150 kg and body mass index (BMI) was 53.15 kg/$m^2$. The patient lost 55 kg of his weight through exercise and diet control. When he visited again, his weight was 95 kg and BMI was 33.66 kg/$m^2$. In physical examination, skin excess and laxity was seen in both breast and abdomen circumferentially and lateral folds were seen in the back. Abdominal contour deformity (Pitman classification type 6) and pseudogynecomastia (grade 3) were present in both breast. Belt dermolipectomy of abdomen, both breast and lateral folds was performed, resecting 6,400 g of tissue and additive 1,200 g through revisional operation. Results: The patient lost 6,500g of his weight and BMI reduced by 2.3 kg/$m^2$. The patient's hospital course was uneventful during 5 weeks of hospitalization and he was satisfied with his final body contour. Conclusion: Body contouring with belt dermolipectomy in patient who has circumferential skin excess and laxity after massive weight loss can be a treatment of choice.

• 전산구조공학
• /
• 제3권2호
• /
• pp.117-128
• /
• 1990

이 연구는 제한된 용량과 기능의 마이크로컴퓨터를 전제로하여 고급의 postprocessing을 효율적으로 달성할 수 있는 algorithm을 개발하고자 의도되었다. 응력도 및 내력도의 도화, 변형의 animation등과 관련된 기존의 postprocessing방법을 개선하엿으며, 이를 바탕으로 새로운 유한요소해석시스템을 개발하였다. 특히 3차원 구조물의 역학적 거동을 가시화하는 문제를 중점적으로 다루었다.