• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.227-230
• /
• 2003

Silicone rubber has very excellent chemical stability and hydrophobicity. A hydrophobic surface can prevent the formation of continuous water films on the surface in wet and heavily contaminated conditions. This phenomenon contributes to the suppression of leakage current and partial discharges on insulator surfaces. Silicone rubber has been used much for housing materials of polymer insulators. ATH is added to the silicone rubber for improvement of its resistance against surface discharge. In this paper, ATH with different particle size and content was added to the silicone rubber during compounding. Silicone rubber was deteriorated by a corona treatment. Hydrophobicity recovery rate after corona treatment and arc resistance of silicone rubber were investigated. Hydrophobicity recovery rate of silicone rubber was evaluated by the measurement of contact angle. Arc resistance was evaluated by measuring weight loss of silicone rubber after arc resistance test. It was observed that the hydrophobicity recovery rate and arc resistance of silicone rubber were different when different particle size and content of ATH were added.

• Resources Recycling
• /
• v.13 no.2
• /
• pp.9-15
• /
• 2004

A large tons of spent iron oxide catalyst come from the Styrene Monomer(SM) production company. It is caused to pollute the land and underground water due to the high alkali contents in the catalyst by burying them in the landfill. In order to recycle the spent catalyst, a basic study on the recovery of chromium ion from metal plating wastewater with the spent catalyst was carried out. The iron oxide catalyst adsorbed physically $Cr^{+6}$ in the lower pH 3.0, that is the isoelectric point of the spent catalyst. It was found that the iron oxide catalyst reduced the $Cr^{+6}$ into Cr+3 by the oxidation of ferrous ion into ferric ion on the surface of catalyst, and precipitated as $Cr(OH)_3$ in the higher than pH 3.0. The $Cr^{+6}$ was recovered 2.0∼2.3g/L catalyst in the range of pH 0.5∼2.0, but it was recovered 1.5 g/L catalyst at pH 3.0 of wastewater. The recovery of Cr was increased as the higher concentration in the continuous process, but the flowrates were nearly affected on the Cr recovery.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.12A
• /
• pp.1171-1180
• /
• 2010

In wireless sensor networks, reliable event detection is one of the most important research issues. For the reliable event detection, previous works usually assume the events are only individual objects such as tanks and soldiers. Recently, many researches focus on detection of continuous objects such as wild fire and bio-chemical material, but they merely aim at methods to reduce communication costs. Hence, we propose a reliable continuous object detection scheme. However, it might not be trivial. Unlike individual objects that could be referred as a point, a continuous object is shown in a dynamic two-dimensional diagram since it may cover a wide area and it could dynamically alter its own shape according to physical environments, e.g. geographical conditions, wind, and so on. Hence, the continuous object detection reliability can not be estimated by the indicator for individual objects. This paper newly defines the reliability indicator for continuous object detection and proposes an error recovery mechanism relying on the estimation result from the new indicator.

• KSBB Journal
• /
• v.5 no.1
• /
• pp.59-67
• /
• 1990

Enzymatic hydrolysis of insoluble cellulose was performed in a bubble column with tangential flow ulrafiltration membrane unit. The reactor was operated in a batch mode as well as semi-continuous and continuous with continuous removal of products through the tangential flow ultrafiltration membrane. The optimum superficial gas velocity was 1-3cm / sec so as to avoid bubble coalescence and enzyme denaturation. In continuous and selni-cotinuous process, the conversion was gradually increased but the total reduced sugar concentration was drcastically dereased with the dilution rate. It was concluded that the bubble column attaching tangential flow ultrafiltration membrane unit was effective on continuous hydrolysis of cellulose and recovery of enzyme.

• Journal of Veterinary Clinics
• /
• v.39 no.6
• /
• pp.353-359
• /
• 2022

Several suture patterns can be used for cystotomy closure, and a continuous suture pattern is the most commonly used. In this study, the fluid-tight ability and other suitabilities of continuous appositional sutures, such as the simple continuous suture pattern (SC), running suture pattern (RN), and Ford interlocking suture pattern (FI), were compared for cystotomy closure. Cystotomy closure was performed using each suture method in 10 cases of ex vivo swine bladders in each group. Suture time, leakage site, suture length, bursting pressure (BP), bursting volume (BV), and circular bursting wall tension (CBWT) were measured. Suture time and suture length were the shortest in RN and the longest in FI. Leakage occurred in two places: the incision line directly and the hole made by the suture. Leakage occurred through the incision line in 4 bladders of the RN group and 2 bladders of the FI group, but not in the SC group, and in the rest of the bladders, leakage occurred through the suture hole. The values of BP, BV, and CBWT increased in the order of FI, SC, and RN. Suture time and suture length can be considered as factors related to healing and side effects. In this study, leakage through the incision was found in a less appositional area; therefore, leakage through the hole could be considered an indicator of better apposition. Good apposition is one of the conditions required for ideal cystotomy closure. The bursting strength representing the fluid-tight ability can be expressed as the CBWT. RN is expected to be efficient and cause a small degree of foreign body reaction; however, it is expected to be less stable. FI has the greatest fluid-tightness ability, but it has been proposed that side effects due to foreign body reactions most frequently occur in FI. In conclusion, SC, which is expected to have a sufficient degree of fluid-tightness and appropriate recovery, is preferable to other continuous appositional suturing methods for cystotomy closure.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.19 no.4
• /
• pp.325-332
• /
• 1999

A manure management plan is important for all dairy operations. This experiment was conducted to determine the effect of different nitrogen(N) application rates of liquid cattle manure on the forage quality, N recovery, and total forage yields of corn-oats cropping system and soil properties at the National Livestock Research Institute, RDA, Suweon in 1997. Eight treatments consisting of no fertilizer, chemical fertilizer $320kg\;N\;ha^{-1}$ as urea, the continuous applications of 320, 640 and $960kg\;N\;ha^{-1}$ as liquid cattle manure(LCM), the residual effects of 200, 400 and $600kg\;N\;ha^{-1}$ as liquid cattle manure were arranged in a randomized complete block design with three replications. Mean plant height of fall sown oats was 70 and 61cm at the continuous application and the residual effect plots, respectively. Mean dry matter percent of fall sown oats at the residual effect plots was higher by 0.9% than that of oats at the continuous application plots, but there were no differences among all treatments. Mean crude protein(CP), acid detergent fiber(ADF), and neutral detergent fiber (NDF) contents of fall sown oats at the continuous application plots were higher by 1.0, 1.6, and 3.1%, respectively, than those of the residual effect plots. Also, there were significant differences among treatments (P<0.05). Total forage dry matter yields of corn and oats cropping system were ranged from 11,365 to $25,668kg\;ha^{-1}$ among the treatments. The yield was orderly ranked as LCM $960kg\;N\;ha^{-1}$ > LCM $600kg\;N\;ha^{-1}$ > LCM $640kg\;N\;ha^{-1}$ > LCM $400kg\;N\;ha^{-1}$ (P<0.05). Compared with the control, manurial value(MV) was 158 and 139% for the plot of the LCM $960kg\;N\;ha^{-1}$ and that of the LCM $600kg\;N\;ha^{-1}$, respectively. N recovery percent of fall sown oats was the highest at the plot of the LCM $200kg\;N\;ha^{-1}$ by 50%, and then was higher in order of the LCM $400kg\;N\;ha^{-1}$, LCM $600kg\;N\;ha^{-1}$, and LCM $320kg\;N\;ha^{-1}$. Contents of exchangeable cation in the soil of the residual effect plots was higher than that of the continuous application plots. These results suggest that the LCM $600kg\;N\;ha^{-1}$ may be the most effective in total forage dry matter yields, manurial value, N recovery, and utilizing liquid manure N under the corn and oats double cropping system.

• ETRI Journal
• /
• v.26 no.6
• /
• pp.635-640
• /
• 2004

A new low-complexity differential detection technique, fractional multi-bit differential detection (FMDD), is proposed in order to improve the performance of continuous phase modulation (CPM) signals such as Gaussian minimum shift keying (GMSK) and Gaussian frequency shift keying (GFSK). In comparison to conventional one-bit differential detected (1DD) GFSK, the FMDD-employed GFSK provides a signal-to-noise ratio advantage of up to 1.8 dB in an AWGN channel. Thus, the bit-error rate performance of the proposed FMDD is brought close to that of an ideal coherent detection while avoiding the implementation complexity associated with the carrier recovery. In the adjacent channel interference environment, FMDD achieves an even larger SNR advantage compared to 1DD.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1520-1523
• /
• 1997

A rigorous dynamic simulation was performed in binary gas mixture H$_{2}$/CO (70:30 vol.%) to determinate start-up operating conditions of PSA(Pressure Swing Adsorption) processes. The rigorous dynamic model for the PSA process contains an Ergun equation for expressing the pressure drop in a bed, and valve equations to compute the boundary pressure change of the bed. As the result of the continuous dynamic simulation of 100 operating cyles in various initial conditions, the unsteady-state appeared in the early period and the cyclic steady-state came out about 20th cycle in feed condition and vaccum condition, and 30th cycle in pure H$_{2}$ condition. As time goes by valve equations made change the pressure at each end of the bed in ressurization, countercurrunt-depressurization and pressure equalization steps. The H$_{2}$ purity and the recovery is 99.99% and 86.73% respectively, which is slightly higher than the experimental data. Main contributiion of this study includes supplying fundamental technologies of handling combined variables PSA processes by developing rigorous models.

• Journal of the Korean Society of Safety
• /
• v.15 no.4
• /
• pp.35-40
• /
• 2000

The influence of cyclic loading history on the creep behavior of the 30 vol% hot-pressed $SiC_f/Si_3N_4copmposite was experimentally investigated at $1200^{\circ}C$. The duration of loading/unloading had great effects on the creep behaviors. The short term duration cyclic loading history test results showed significant reduction in the primary and steady-state creep rates. For example, 300sec loading/300sec unloading history resulted in 70% lower steady-state creep rate than that of the continuous loading. However the long term duration cyclic loading history test results showed little change in creep rates compared to those of the continuous one. The reason for the significant change in the short term duration cycles was estimated due to the change in the stress redistribution between the fiber and matrix during the creep recovery in the primary stage.

• The Journal of the Korea Contents Association
• /
• v.22 no.6
• /
• pp.386-399
• /
• 2022

The purpose of this study is to identify how education and activities of urban forest healing programs affect emotional rest (healing recovery environment awareness, restoration of attention, and leisure life satisfaction). To this end, 38 people were divided into experimental groups (forest healing program education and practice), and control groups (non-program participation). As a result of the study, in the case of the experimental group, emotional rest factors such as healing recovery environment perception, attention recovery, and satisfaction with leisure activities after the program were statistically significantly improved, and in the case of the control group, there was no change in emotional rest after the program. In addition, there were differences between groups in both pre and post regarding the difference in emotional rest between the participant groups, and the difference in emotional rest afterwards was much larger than the pre-difference. In conclusion, people who receive regular education on forest healing and have done actual forest healing activities experience higher emotional rest than those who do not. This suggests that continuous motivation and regular practice can raise awareness of the healing recovery environment, promote attention recovery, and have a positive effect on leisure life through appropriate programs rather than simply taking a walk.