• The Korean Journal of Pain
• /
• v.2 no.1
• /
• pp.85-88
• /
• 1989

We experienced 3 cases of continuous caudal block. The first case had suffered from severe pain of the external genitalis after urethral injury from a car accident and this was controlled by continuous caudal block. The other 2 cases were a metastaric malignant tumor of the lumbar vertebra from cancer of the cervix and histiocytoma of the breast, and both had suffered from intractable pain of the lower extremity. But lumbar epidural block was impossible because of radiation fibrosis and previous operation scar of the spine. So a continuous caudal block was performed and the pain was controlled effectively. The longest duration was 50 days and there were no problems related catheter indwelling. Pain in the area of the lumbar and sacral nerve distribution can be controlled by continuous caudal block. Here in we reported 3 cases and reviewed the literature.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.479-482
• /
• 2008

Since late of 2000, KIER has developed a novel pyrolysis process for production of fuel oils from polymer wastes. It could have been possible due to large-scale funding of the Resource Recycling R&D Center. The target was to develop an uncatalyzed, continuous and automatic process producing oils that can be used as a fuel for small-scale industrial boilers. The process development has proceeded in three stages bench-scale unit, pilot plant and demonstration plant. As a result, the demonstration plant having capacity of 3,000 tons/year has been constructed and is currently under test operation for optimization of operation conditions. The process consisted of four parts ; feeding system, cracking reactor, refining system and others. Raw materials were pretreated via shredding and classifying to remove minerals, water, etc. There were 3 kind of products, oils(80%), gas(15%), carbonic residue(5%). The main products i.e. oils were gasoline and diesel. The calorific value of gas has been found to be about 18,000kcal/$m^3$ which is similar to petroleum gas and shows that it could be used as a process fuel. Key technologies adopted in the process are 1) Recirculation of feed for rapid melting and enhancement of fluidity for automatic control of system, 2) Tubular reactor specially-designed for heavy heat flux and prevention of coking, 3)Recirculation of heavy fraction for prevention of wax formation, and 4) continuous removal & re-reaction of sludge for high yield of main product (oil) and minimization of residue. The advantages of the process are full automation, continuous operation, no requirement of catalyst, minimization of coking and sludge problems, maximizing the product(fuel oil) yield and purity, low initial investment and operation costs and environment- friendly process. In this presentation, background of pyrolysis technology development, the details of KIER pyrolysis process flow, key technologies and the performances of the process will be discussed in detail.

• Journal of Chest Surgery
• /
• v.20 no.1
• /
• pp.39-47
• /
• 1987

The records of 268 patients, who were diagnosed as spontaneous pneumothorax during the period 1975 to 1984, treated at the department of thoracic and cardiovascular surgery, Hanyang University Hospital, were reviewed retrospectively to evaluate the effect of surgical intervention on each indications. Of these,.61 patients [22.8%] were taken operation to treat the pneumothorax after closed thoracostomy. We have classified the 61 patients to evaluate the therapeutic effect on each indications. And the therapeutic effect is based on the chest tube indwelling days. The results were as follows: 1. The chest tube indwelling days of the group who were taken closed thoracostomy only was average 14.13*9.17 days [range 5-66 days], and that of the group who were finally taken the thoracotomy after closed thoracostomy was 21.85*12.30 days [range 5-55 days]. 2. The indications of thoractomy were thoracoscopic findings, recurrence and continuous air leakage. 3. The chest tube indwelling day of the group who was taken thoracotomy by thoracoscopic findings was average 11.67*6.51 day, that was relatively short compared to those of the other groups. 4. The continuous air leakage group after closed thoracostomy was subdivided into three subgroups, continuous air leakage in 1st attack, thoracoscopic findings in 1st attack, and recurrence. 5. Of these, the chest tube indwelling day of the subgroup, who was taken operation by thoracoscopic findings, was 21.33e8.26, that was relatively short compared with those of the other subgroups. We use the thoracoscope as excellent diagnostic tool to detect the operation indication in the spontaneous pneumothorax patients. And we gain the benefits to shorten the chest tube indwelling days and admission days, and also to protect the recurrence.

• KSBB Journal
• /
• v.14 no.6
• /
• pp.742-746
• /
• 1999

The microalgal, Chlorella sp. HA-1, had good $CO_2$ fixation efficiency compared to other algal strains at the same operating condition. In this study, Chorella sp. HA-1 showed similar tolerance both 10% and 20% $CO_2$ concentration. By optimization of the major operation variables such as pH, initial cell concentration, light intensity, the $CO_2$ fixation rate could be raised to a reasonably high value, 372 $gCO_2/m^2{\cdot}day$ in a 3 L internally illuminated photobioreactor. In order to maintain the $CO_2$ fixation rate for a long time, the method of semi-continuous operation was employed, in which dilution ratio was the controlling parameter. Starting with the dilution ratio of 0.5 with the increased increment of 0.1, the constant $CO_2$ fixation rate was obtained.

• Membrane Journal
• /
• v.14 no.1
• /
• pp.75-84
• /
• 2004

In this study, we present a noble study far membrane transport models using chlorine resistance of polyamide RO membranes. Membrane transport mechanism is investigated by the comparison of membrane permeation performance under the continuous and Intermittent operation modes with mixed feed solution containing NaOCl and NaCl. Analysis of permeation performance indicates that solution-diffusion model and preferential adsorption-capillary flow model are relatively efficient according to operation mode. Under the continuous flow state, mass transfer depends on preferential adsorption-capillary flow model rather than solution-diffusion model. On the other hand, it prefers solution-diffusion model to preferential adsorption-capillary flow model under the stationary state. SEM images of NaOCl treated membrane surfaces strongly support these conclusions. These surface images reveal that NaOCl treated membrane in continuous operation mode exhibits ridge and valley structure in some fraction of the surface area, whereas that in intermittent operation mode shows surface degradation entirely.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.3
• /
• pp.397-404
• /
• 2011

In this research, wish to suggest method to embody system that can accommodate defect of PLC and find actual propriety. Defect permission control system minimizes production damage because enables repair and checking without discontinuance and improve believability about whole system. Propose duplexing of system to embody this fault tolerant system. Therefore, composed control system that can permit defect or breakdown duplexings of various module proposing this system, and confirms to simulation and actuality kiln of defect permission control system through an application experiment, and compares for mean time between defect by estimate and defect special quality and system configuration of failure(failure) to improve believability of PLC control system together. In proposed system expression method and system mode and relation with operation mode, error discovery mode and switching tube of duplexing mode, and PLC's central processing unit of node study algorithm about master-standby conversion driving and continuous operation of 2 channels method that have 2 that is not one and deduced continuous operation method and result about defect permission in this algorithm and applies this result to actuality kiln control system and confirms continuous operation about PLC defect permission.

• Membrane Journal
• /
• v.29 no.4
• /
• pp.216-222
• /
• 2019

In this study, permeation experiments were conducted using naturally circulating spherical beads, backwashable plate membrane and the air supplied from the bottom of the MBR. The activated sludge solution was maintained at 8,000 mg/L of MLSS and compared transmembrane pressure (TMP) with respect to FR (filtration and relaxation), FR/BW (filtration and relaxation/backwashing), SFCO (sinusoidal filtration continuous operation) and SFCO/BW (sinusoidal filtration continuous operation/backwashing). As the backwashing flux decreased from 47 to $14L/m^2{\cdot}hr$, the TMP increased generally, but the TMP of FR system increased significantly comparing with SFCO. In addition, the backwashing method reduced more TMP comparing to the cleaning method using spherical beads, and it was confirmed that the operation method using the spherical beads and the backwashing simultaneously is more effective than each method.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.391-391
• /
• 2000

Manufacturing process generally exhibits major or minor variations due to deviation of raw materials, equipment degradation, controller malfunction, and so on. Extensive research based on multivariate statistical process control has been done to monitor the unstable states and indicate a corrective action. A prototype of intelligent operation support system ("ISYS-MSPC") has been developed as a tool that supports the enhanced operation to guarantee the high productivity and a uniform high quality product. This system has been applied to the industrial batch and continuous processes and its performance has been validated .

• Proceedings of the Safety Management and Science Conference
• /
• 2008.04a
• /
• pp.443-450
• /
• 2008

This paper is to present design principle and operation strategy of acceptance control chart by the use of OC-Based sampling inspection for continuous data. The unified control limits for acceptance control chart when considering both APL(Acceptable Process Level) and RPL(Rejectable Process Level) are proposed. The control limits can be also extended to the acceptance control chart with unknown process standard deviation.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.23 no.3
• /
• pp.39-46
• /
• 2017

Purpose: Here is little information about China's operation department of general hospital in Korean medical architecture papers, which is inconvenient for scholars engaged in medical building research and comparison. Furthermore, Surgery is to provide patients with surgery and rescue sites, is an important technical department of the hospital, and then with the development of medical technology and people's trust in medical science, the role of the operating room will become increasingly important. Therefore, the purpose of this research is to analyze history, changes and definitions of the operating room and China's operation department of general hospital related laws and regulations for future research to provide effective analysis of data, and find shortcomings. Methods: This research was conducted according to the relevant laws, books, and papers of the operation department of Chinese general hospital. Results: At present hospital construction in China is in the period of rapid development and coupled with the growing medical technology, operating room layout and configuration is still in the continuous trial of continuous improvement stage. Overall, it requires more detailed guidelines to improve the quality of the operating room. Implications: Implications: It is expected that the research of this paper will provide an effective reference for the future research of the operation department of China General Hospital, which can promote and improve the work system of the operation department of China General Hospital.