• Journal of Korea Multimedia Society
• /
• v.14 no.9
• /
• pp.1152-1164
• /
• 2011

Stock price is stream data to change continuously. The characteristics of these data, stock trends according to flow of time intervals may differ. therefore, stock price should be continuously prediction when the price is updated. In this paper, we propose the new prediction system that continuously predicts the stock price according to the predefined time intervals for the selected stock item using HTM model. We first present a preprocessor which normalizes the stock data and passes its result to the stream sensor. We next present a stream sensor which efficiently processes the continuous input. In addition, we devise a storage node which stores the prediction results for each level and passes it to next upper level and present the HTM network for prediction using these nodes. We show experimented our system using the actual stock price and shows its performance.

• Korean Chemical Engineering Research
• /
• v.55 no.6
• /
• pp.816-821
• /
• 2017

An integrated slow mixing/sedimentation and net fit fiber filtration system has been developed to reduce the high concentrations of suspended solid (SS) and total phosphorus (T-P) in the reject water from sewage/wastewater. A filtration device used in this experiment consists of coagulation, in-line mixing, air injection, slow mixing/sedimentation, and filtration processes. The performance test using this device was carried out with six operational modes for reject water from sewage treatment plant. Experimental conditions used were 16.7, 33.3, 41.7 and 50.0 ton/day of flow rate and 2~4 of Al/P molar ratio. By injection of coagulant in each operational mode, the high removal efficiencies of SS and T-P were obtained, but continuous operation time was decreased to 7.8~11.4 min in most modes. However, when the Mode 5 of the developed filtration device was applied, the continuous operation time was maintained up to 88.2 min. Also, it was found that the continuous operation time in the Mode 5 using the developed system was increased from 8 to 11.3 times longer than those in other modes. Backwashing flow rate was also very low at 5.4% of total filtered water. Therefore, it can be concluded that the Mode 5 of the developed filtration system was the most efficient treatment method for the removal of high concentrations of SS and T-P.

• Journal of Korean Society on Water Environment
• /
• v.36 no.5
• /
• pp.423-430
• /
• 2020

To improve the low treatment efficiency of sewage treatment plants, the separated sewer system must be maintained to provide an adequate flow rate and quality of the sewage under the effect of inflow. In this study, data from five locations of Namsuk, Dukgok1, Dukgok2, Kanggu, and Opo were used to conservatively calculate the inflow water volume. The sewer flow and rainfall data were collected in 2017. The factors in the standard method used to calculate the inflow of the combined sewer pipes including "rainy days", "rainfall impact period", and "period for basal sewer" were defined as 3 mm/day, continuous rain for two days, and two weeks prior to the inflow generation, respectively. "Rainy days", "rainfall impact period", and "period for basal sewer" were conservatively adjusted to 5 mm/day, continuous rain for five days, and three weeks prior to the inflow generation, respectively. As a results of the adjustment, the linearity (r²) was improved except for in Dukgok1. This implies that the conservative adjustment made in this study could improve the management quality of sewer pipes. Also, the linear correlation coefficient (a_i) between inflow and rainfall showed a large difference between the target locations, which can be another monitoring factor affecting the quality of sewer pipes. To improve the correlation based on the individual characteristics of the locations in Korea, the automatic algorithm for the inflow calculation should be developed by innovative intellectual technologies for application to the entire national area.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1999.12a
• /
• pp.523-530
• /
• 1999

연속살균장치는 $130^{\circ}C$에서 $140^{\circ}C$의 초고온에서 연속적으로 식품을 열처리 하는 공정으로 재래 배치식 공정에 비하여 순간적인 짧은 시간이 소요되는 경제적인 공정이나, 액상과 고상으로 구성된 저산도 식품은 고상입자의 대류열전달 계수와 장치내 체류시간이 정확히 구명되지 않아서 연속살균기술이 성공적으로 적용되지 못하고 있다. 본 연구에서 연속살균장치에서의 액상식품과 고상식품사이의 대류열전달 계수를 예측하기 위하여 연속살균장치의 Hold tube에서 정육면체 모델 식품내부의 온도를 측정할 수 있는 장치를 개발하였다. 연속살균장치의 홀드튜브에서 정육면체 모델 식품의 온도변화를 예측할 수 있는 유한차분법을 이용한 시뮬레이션 모델을 개발하고 소고기를 대상으로 이 시뮬레이션 모델의 입력변수인 비열, 열전도도를 실험적으로 측정하여 사용하였다. 0.0에서 15.0 centipoise의 점도를 가지는 모델 액상식품의 15.6에서 45.2liter/min 의 유속에 대하여 액상과 소고기 정육면체의 대류열전달계수는 792에서 2107W/$m^2$K으로 예측되었다.

• Korea-Australia Rheology Journal
• /
• v.16 no.3
• /
• pp.153-160
• /
• 2004

Open microcellular foams having small-sized cell and good mechanical properties are desirable for many practical applications. As an effort to reduce the cell size, the microcellular foams combining viscosity improvers into the conventional formulation of styrene and water system were prepared via high internal phase emulsion polymerization. Since the material properties of foam are closely related to the solution properties of emulsion state before polymerization, the flow behavior of emulsions was investigated using a controlled stress rheometer. The yield stress and the storage modulus increased as viscosity improver concentration and agitation speed increased, due to the reduced cell size reflecting both a competition between the continuous phase viscosity and the viscosity ratio and an increase of shear force. Appreciable tendency was found between the rheological data of emulsions and the cell sizes of polymerized foams. Cell size reduction with the concentration of viscosity improver could be explained by the relation between capillary number and viscosity ratio. A correlative study for the cell size reduction with agitation speed was also attempted and the result was in a good accordance with the hydrodynamic theory.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.1443-1448
• /
• 2009

Numerical analysis has been carried out to investigate air-side convective heat transfer characteristics in compact heat exchangers with continuous plate fins. Simulation results such as air flow and temperature distributions are presented, and heat transfer characteristics are compared for various inlet conditions. Results from various turbulence models are also compared for applicability. There is large difference between the local heat transfer coefficient distributions along the cylinder wall for circular tubes. Colburn j factors from the calculated results of circular and flat tubes in the heat exchangers are compared for various Reynolds number. The predicted results in this study can be applied to the optimal design of air conditioning system. with compact heat exchanger.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1994.06f
• /
• pp.139-160
• /
• 1994

The-state-of-the-art of rice drying in the U.S.A. is presented. The U.S.A. is a minor producer but major exporter of rice. Head yield is its major criterion in evaluating rice quality . A decrease of 1 to 3 points in head yield can be expected to occur in a well-designed rice-drying system. Rice is dried on the farm in bins in the U.S. A., and n high-temperature continuous -flow dryers at the elevator level. Two relatively new rice-drying systems are discussed in some detail. : The top-bin/in -bin-counterflow bin-type on-farm dryer, and the concurrent-flow high-temperature elevator dryer.

• Journal of ILASS-Korea
• /
• v.13 no.1
• /
• pp.22-27
• /
• 2008

The false diffusion occurs generally when the flow is oblique to the grid lines and when there is a non-zero gradient of the dependent variable in the direction normal to the flow. This numerical problem can overestimate diffusion terms in the continuous phase, causing the numerical inaccuracy for the simulation of impinging sprays on inclined walls because most of spray calculation uses rectangular grid system. Therefore, the main objective of this article is to investigate numerically the influence of false diffusion on numerical simulation for spray-wall impingement on inclined walls. It is found that unlike the spray impingement normal to the wall, the numerical diffusion exists in the case when diesel sprays impinge on the inclined walls with different angles. The results show that the correction function should be considered for accurate prediction of spray penetration length and more elaborate numerical schemes should be utilized to reduce the false diffusion.

• Journal of East-West Nursing Research
• /
• v.3 no.1
• /
• pp.7-16
• /
• 1998

This paper reviewed the concept of the energy flow in east and west. The differences in the views of the energy flow between oriental and western thought were compaired according to the ontological point of view. Human body take up energy and material on open system which maintains homeostasis. Human and environment are continuously interacting in a state of co-existence. Human has energy field called "aura" and seven chakra in energy outflow moving came as meridian. Qi is an invisible cosmic energy helping the fundamental human activity and changes. The basic action of Qi is helping the human growth and development, maintain the body temperature and preventing the intrusion of microorganism. In the normal healthy organism, all are maintained in balance and in a continuous circulation of Qi, while illness is the result of the disturbed Qi flow in the aspect of Qi-theory. Although there are differences between oriental and western medicine in approaches to clients, the basic point of view and philosophy have many similarities on fundamental level. An understanding of the basic thought of energy flow and oriental concept of energy flow implies a more comprehensive meaning than the perspective of unitary transformation discussed in modern western thought of energy flow. Now we should avoid narrow view of energy concept and regard energy flow as an integrated concept with Korean culture. Regarding Qi-theory which provides a comprehensive and humanistic and ethical foundation for nursing philisophy through this overview, it is hoped that a contribution will be made to the development of nursing intervention which is suitable to Korean context.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.18 no.2
• /
• pp.119-131
• /
• 2020

A numerical model was developed using COMSOL Multiphysics to evaluate groundwater flow that causes radionuclide migration in the unsaturated zone of a near-surface disposal facility, which is considered as a domestic low and an intermediate-level radioactive waste disposal facility. Each scenario was modeled by constructing a two-dimensional domain that included the disposal vault, backfill, disposal cover, and unsaturated aquifer. A comparison of the continuous and intermittent rainfall conditions exhibited no significant difference in any of the factors considered except the wave pattern of water saturation. The input data, such as porosity and residual water content of the unsaturated aquifer, were observed to not have a significant effect on the groundwater flow. However, the hydraulic conductivity of the unsaturated aquifer was found to have a significant effect on the groundwater flow. Therefore, it is necessary to assess the hydraulic conductivity of an unsaturated aquifer to determine the extent of groundwater infiltration into the disposal vault.