• 한국물환경학회지
• /
• 제23권5호
• /
• pp.577-580
• /
• 2007

The influence of flow rate has been investigated on the treatment efficiency of continuous cycling electrolytic process employing artificial and actual photographic wastewater which containing silver ion. For artificial wastewater, the treatment efficiency of process was found to rise ca. three times when the flow rate of wastewater was increased from 3 mL/min to 15 mL/min. The process efficiency was doubled under the same condition regarding actual wastewater. The effect of flow rate on the treatment efficiency was observed to be altered according to the metal ionic form and solution composition. The coefficient of mass transfer was estimated using model equation, which verified that the raised treatment efficiency at higher flow rate was due to the increased mobility of ionic species.

• 한국응용과학기술학회지
• /
• 제26권4호
• /
• pp.394-399
• /
• 2009

The esterification of palmitic acid in Jatropha Oil using 8wt% p-TSA catalyst was done at the 1:8 molar ratio of oil to methanol and $65^{\circ}C$. The conversion of palmitic acid appeared to be 95.3% in 60min. After that, the continuous transesterification of the oil using 0.5wt% KOH, 0.8wt% TMAH mixed catalyst[40vol% KOH(0.5wt%) + 60vol% TMAH(0.8wt%)] and 1.1wt% TMAH was conducted with the flow rates and the molar ratios at $65^{\circ}C$. The overall conversion of Jatropha Oil increased with the decrease of flow rate and showed 95.6% with 9ml/min of flow rate at the 1:8 molar ratio of oil to methanol and $65^{\circ}C$. But it showed 87% with 15ml/min of flow rate at the same conditions. The recovery of methanol(%) appeared to be 86% at the 1:8 molar ratio of oil to methanol, mixed catalyst and $65^{\circ}C$.

• 한국전산유체공학회지
• /
• 제2권1호
• /
• pp.117-128
• /
• 1997

Effects of dam and weir on the fluid flow and behavior of inclusions in the continuous casting tundish have been studied using the CFD (Computational Fluid Dynamics) technique. Inclusions affecting the quality of steel products have been considered to be passive: the fluid flow has been obtained for unstaggered grid points defined on body-fitted generalized cuvilinear coordinates with no attention on inclusions, and the spatial propagation of inclusions has been determined by using the flow field data. The result show that the dam and weir direct the flow to the free surface and increase the residence time of inclusions significantly, and thereby that inclusions have much more chance to be floated to the free surface of the tundish where it is eliminated. It is also found that they offer more margin on the geometric design of exit nozzles connected to moulds. This finding is particularly important for twin casting operations where the quality of steel products from the two moulds be kept uniformly.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2448-2453
• /
• 2008

The present study numerically investigates the flow and heat transfer characteristics of rib-induced secondary flow in a cooling channel with staggered V-shaped ribs, extruded on both walls. The rib-height-to-hydraulic diameter ration (h/$D_h$) is 0.17; the rib pitch-to-height ratio (p/h) equals 2.8; the Reynolds number is 50,000. Shear stress transport (SST) turbulence model is used as a turbulence closure. The present results are compared with those for a continuous V-shaped rib. Computational results show that, for average heat transfer rate the staggered V-shaped rib gives about 2.5 times higher values than the continuous V-shaped rib, while, for the streamwise pressure drop the former gives about 5 times higher values than the latter. Consequently, for the thermal performances, based on the equal pumping power condition, the staggered one gives about 2 times higher values than the continuous one. Also, for the staggered V-shaped rib, complex secondary flow patterns are generated in the duct due to the snaking flow in the streamwise direction, and more uniform heat transfer distributions are obtained.

• 대한환경공학회지
• /
• 제38권1호
• /
• pp.25-33
• /
• 2016

본 연구에서는 수처리 공정에 적용하고 있는 CSTR 반응조를 대상으로 유입 유량이 다양하게 변동하는 경우 반응조 내부 수리 거동을 조사하고자 하였다. 유입 유량의 변동은 설계 유량 대비 10~100%까지 변화시켰으며, 각 경우를 CFD 기법을 이용하여 transient 상태의 추적자 실험을 모의하였으며, 모사 결과로부터 2차 정보를 추출하여 수리 거동 지표를 계산하여 유입 유량과 수리거동의 관계를 면밀히 조사하였다. 그 결과, 유입 유량이 증가할수록 Modal index와 ${\beta}$값이 증가하는 거동을 보였으며 Morrill index는 유입 유량과의 관계에서 국부적인 극소값을 가지는 유입 유량이 두 곳 나타났는데 각각 설계 유량의 20%되는 지점과 40%가 되는 지점이었다. 두 극소값이 나타나는 유입 유량보다 유량이 증가하면 다시 Morrill index가 증가하는 현상을 보여 이상적인 CSTR 반응조에 근접하는 것으로 나타났다.

• 대한기계학회논문집B
• /
• 제23권3호
• /
• pp.374-387
• /
• 1999

Two-dimensional turbulent fluid flow and solidification were investigated in a continuous casting process of a steel slab with electromagnetic field. The electromagnetic field was described by the Maxwell equations. The enthalpy-porosity relation was employed to suppress the velocity within a mushy region. A revised low-Reynolds number $k-{\varepsilon}$ turbulence model was used to consider the turbulent effects. It is shown that the temperature gradient in the casting direction in the case with EMBR becomes very weak compared to that of the case without EMBR. The results also show that the velocity profiles of the case with solidification are quite different from those of the case without solidification.

• 산업기술연구
• /
• 제25권B호
• /
• pp.89-97
• /
• 2005

Application of proper orthogonal decomposition (POD) and continuous wavelet transform (CWT) is introduced to study wind speed and building roof pressures of flow separation region. In this study, a detailed analysis of the approach wind flow, wind-induced building pressure and the relation between the two fields was carried out using the POD technique and CWT analysis. The results show potential of the application of POD and CWT in characterization of spatio-temporal and spectral properties of the approach wind and its induced dynamic pressure events. Some of findings resulting from the application of this analysis can be summarized as follows: (1) The POD first principal coordinate of the roof pressure in the separated shear layer is closely correlated with the longitudinal component of oncoming flow. (2) The CWT analysis suggests that the extreme peak pressure in the separated shear layer is due to condensed large-scale eddy motions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.59-60
• /
• 2011

본 논문에서는 기존의 PCR 장비가 가지고 있는 낮은 경제성, 장비의 대형화, 긴 분석 시간 등과 같은 단점을 해결하기 위하여 ATMEGA128 마이크로 칩을 사용 continuous-flow PCR 칩의 온도를 제어 하였다. Polydimethylsiloxane (PDMS)와 산화 인듐-주석(Indium tin-oxide, ITO) 유리 기판을 사용하여 continuous-flow PCR 칩을 제작하였고 PDMS를 주조 하여 마이크로 채널을 형성하였다. 또한 유리 기판위에 ITO 전극을 패터닝하여 마이크로 히터를 제작하였다. 이 결과 continuous-flow PCR 칩에서 빠르고 정확한 온도 제어를 통한 DNA 중합 효소 연쇄반응 결과를 얻을 수 있었다.

• 한국산학기술학회논문지
• /
• 제7권4호
• /
• pp.709-714
• /
• 2006

본 연구는 폐기물로 발생되는 부산석회 Core를 연속식 칼럼에 적용하여 수중의 인산염을 효과적으로 제거할 수 있는 방안을 찾고자 수행되었다. 부산석회와 인산염의 칼럼 반응에서 Hydroxyapatite을 형성하여 수중의 인산염을 제거할 수 있는 것으로 나타났으며 부산석회 Core size 1, 2에서 유입수의 인산염 농도에 관계없이 초기 11시간동안 90% 이상의 높은 제거율을 보였다. 또한 부산석회 Core size와 관계없이 유입수 유량이 증가할수록 파과시간이 줄어드는 것을 알 수 있었다.

• 대한기계학회논문집B
• /
• 제23권1호
• /
• pp.12-24
• /
• 1999

A computer program has been developed for analyzing the two-dimensional, unsteady conservation equations for transport phenomena in the molten region of twin-roll continuous casting in order to predict the turbulent velocity, temperature fields, and solidification process of the molten steel. The energy equation of the cooling roll is solved simultaneously with the conservation equations of molten steel in order to consider heat transfer through the cooling roll. The results show the velocity, temperature and solidification pattern in the molten region with roll temperature as a function of time. The results for velocity and temperature fields with solidification are compared with those without solidification, giving different thermofluid characteristics in the molten region. We also investigated the effects of revolutional speed of roll, superheat and nozzle geometry on the turbulent flow, temperature and solidification in the molten steel and temperature fields in the cooling roll.