• Journal of Korean Society on Water Environment
• /
• v.37 no.6
• /
• pp.433-441
• /
• 2021

The aim of this study was to optimize the ozonation and ceramic membrane integrated process for greywater reclamation. The integrated process is a repeated sequential process of filtration and backwash with the same ceramic membrane. Also, this study used ozone and oxygen gas for the backwashing process to compare backwashing efficiency. The study results revealed that the optimum filtration and backwash time for the process was 10 minutes each when comparing the filtrate flow and membrane recovery rate. The integrated process was operated at three different operating conditions with i) 10 minutes for filtration and 10 minutes for ozonation, ii) 10 minutes for filtration and 10 minute for oxygen aeration, and iii) continuous filtration without any aeration for synthetic greywater. The integrated process with ozone backwashing could produce 0.55 L/min of filtrate with an average of 18.42% permeability recovery, while the oxygen backwashing produced 0.47 L/min and 6.26%, respectively. And without any backwashing, the integrated process could produce 0.29 L/min. This shows that the ozone backwash process is capable of periodically recovering from membrane fouling. The resistance of the fouled membrane was approximately 34.4% for the process with ozone backwashing, whereas the resistance was restored by 10.8% for the process with oxygen backwashing. Despite the periodical ozone backwashing and chemical cleaning, irreversible fouling gradually increased approximately 3 to 4%. Approximately 97.6% and 15% turbidity and TOC were removed by ceramic membrane filtration, respectively. Therefore, the integrated process with ozonation and ceramic membrane filtration is a potential greywater treatment process.

• Journal of the Korean Society of Safety
• /
• v.37 no.5
• /
• pp.80-88
• /
• 2022

The Korean nuclear industry had developed the SPACE (Safety and Performance Analysis Code for nuclear power plants) code, which adopts a two-fluid, three-field model that is comprised of gas, continuous liquid and droplet fields and has the capability to simulate three-dimensional models. According to the revised law by the Nuclear Safety and Security Commission (NSSC) in Korea, the multiple failure accidents that must be considered for the accident management plan of a nuclear power plant was determined based on the lessons learned from the Fukushima accident. Generally, to improve the reliability of the calculation results of a safety analysis code, verification is required for the separate and integral effect experiments. Therefore, the goal of this work is to verify the calculation capability of the SPACE code for multiple failure accidents. For this purpose, an experiment was conducted to simulate a Control Element Drive Mechanism (CEDM) break with a safety injection failure using the ATLAS test facility, which is operated by Korea Atomic Energy Research Institute (KAERI). This experiment focused on the comparison between the experiment results and code calculation results to verify the performance of the SPACE code. The results of the overall system transient response using the SPACE code showed similar trends with the experimental results for parameters such as the system pressure, mass flow rate, and collapsed water level in component. In conclusion, it can be concluded that the SPACE code has sufficient capability to simulate a CEDM break with a safety injection failure accident.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.17 no.1
• /
• pp.18-27
• /
• 2021

This study aims to develop an improved evaluation technology for assessing CANDU-6 safety. For this purpose, the multiple steam generator tube rupture (mSGTR) followed by an unmitigated station blackout (SBO) in a CANDU-6 plant was selected as a hypothetical event scenario and the analysis model to evaluate the plant responses was envisioned into the MARS-KS input model. The model includes logic models for controlling the pressure and inventory of the primary heat transport system (PHTS) decreasing due to the u-tubes' rupture, as well as the main features of PHTS with a simplified model for the horizontal fuel channels, the secondary heat transport system including the shell side of steam generators, feedwater and main steam line, and moderator system. A steady state condition was successfully achieved to confirm the stable convergence of the key parameters. Until the turbine trip, the fuel channels were adequately cooled by forced circulation of coolant and supply of main feedwater. However, due to the continuous reduction of PHTS pressure and inventory, the reactor and turbine were shut down and the thermal-hydraulic behaviors between intact and broken loops got asymmetric. Furthermore, as the conditions of low-flow coolant and high void fraction in the broken loop persisted, leading to degradation of decay heat removal, it was evaluated that the peak cladding temperature (PCT) exceeded the limit criteria for ensuring nuclear fuel integrity. This study is expected to provide the technical bases to the accident management strategy for transient conditions with multiple events.

• The Journal of Korean-Japanese National Studies
• /
• no.35
• /
• pp.107-144
• /
• 2018

This paper summarizes the genealogy of post-war Zainichi magazines in Japan until 1959 and examines their meaning in the context of magazine history in Japan. The purpose of this paper is to prepare the framework to view characteristics of Zainichi magazines in Japan after the war until the present from a continuous and comprehensive perspective. Zainichi, who were left behind in Japan after the war began to project diverse aspects of their lives onto magazines. Despite the poor publishing environment, censorship of GHQ, shortage of writers and financial limitations, the Zainichi society did not give up the public sphere of magazines. The confusion in this time period acted as an element to expose limitations of Zainichi magazines in Japan. Most of magazines published in 1940s and 50s had to focus on political propaganda within the political frame, and many of such magazines were only published for a short term. In other words, it is ambiguous to define the majority of them as 'magazines' and a considerable number of them cannot even confirm the existence, making it difficult to examine the whole picture of magazines from this period. However, recently excavated materials indicate that most of Zainichi magazines in Japan attempted to reflect the reality of the Zainichi society in various ways, though they were confined in the political frame. The process in which language of magazines was changed from Korean language to Japanese and then again to Korean language suggests that Zainichi magazines in Japan tried to consistently express their existence in 'ethnicity,' 'homeland' and beyond, mediated by 'politics' and 'culture.' Moreover, the experience of seeking for the possibility of Zainichi culture in Japan from the flow of cultural movements in Japan during 1950s is an experience of seeking for a popular 'expression' that overcomes the political conflict of homeland. This reveals the diversity the Zainichi society to occur afterwards. A more precise study on individual magazines published during this period would be necessary in the future.

• Clean Technology
• /
• v.15 no.2
• /
• pp.130-136
• /
• 2009

Commercial catalyst (Cu-Zn/$Al_2O_3$, Johnson Matthey Co., 83-3 Catalyst) was applied to the hydrogen production by steam reforming of methanol in the micro-channel reactor (MCR). The steam reforming of methanol was tested over Cu-Zn catalyst at temperatures in the range of 200 and 300$^{\circ}C$, the catalyst size of 0.05${\sim}$2.2 mm, the space velocity of 3,000${\sim}$10,000 $hr^{-1}$ in a fixed bed continuous flow reactor. The conversion of methanol and the yield $H_2$ preferred high temperatures and low space velocities, and had optimal results with the particle size of 0.35 mm. Based on the results from experiments with fixed bed reactor, two types of MCR, boat bed and stacked bed MCRs, were studied. The stacked bed type MCR showed better methanol conversion compared with the boat type one.

• Journal of the Korean Society for Heat Treatment
• /
• v.36 no.3
• /
• pp.121-127
• /
• 2023

When high carbon steel is heated in an appropriate austenizing temperature range and subjected to austempering, the size and shape of lamellar structure can be controlled. The high carbon steel sheet having the pearlite structure has excellent elastic characteristics because it has strong restoring force when properly rolled, and is applied in a process known as patenting-process using lead bath. In the case of isothermal treatment using lead-medium, it is possible to quickly reach a uniform temperature due to high heat transfer characteristics, but it is difficult to replace it with process technology that requires treatment to remove harmfulness lead. In this study, we intend to develop fluidization technology using garnet powder to replace the lead medium. After heating the high-carbon steel, the cooling rate was changed by compressed air to the vicinity of the nose of the continuous cooling curve, and then maintained for 90 s and then exposed to room temperature. The microstructure of the treated specimens were analyzed and compared with the existing products treated with lead bath. The higher the flow rate of compressed air, the faster the cooling rate to the pearlite transformation temperature, so lamellar spacing decreases and the hardness tends to increase.

• Nuclear Engineering and Technology
• /
• v.55 no.1
• /
• pp.71-79
• /
• 2023

Air ingress incidents are major safety accidents in very-high-temperature reactors (VHTRs). Air containing a high volume fraction of oxygen may cause severe oxidation of core components at the VHTR, especially for the significantly thin alloy tube wall in the intermediate heat exchanger (IHE). The research objects of this study are Inconel 617 and Incoloy 800H, two candidate alloys for IHE in VHTR. The air ingress accident scenario is simulated with high-temperature air flow at 950 ℃. A continuous oxide scale was formed on the surfaces of both the alloys after the experiment. Because the oxide scale of Inconel 617 has a loose structure, whereas that of Incoloy 800H is denser, Inconel 617 exhibited significantly more severe internal oxidation than Incoloy 800H. Further, Inconel 617 showed a significant decrease in ultimate tensile strength and plasticity after aging for 200 h, whereas Incoloy 800H maintained its tensile properties satisfactorily. Through control experiment under vacuum, we preliminarily concluded that serious internal oxidation is the primary reason for the decline in the tensile properties of Inconel 617.

• Analyses & Alternatives
• /
• v.2 no.2
• /
• pp.93-110
• /
• 2018

Due to its speciality, Johannesburg has drawn wide attention from the international academia, which the existing urban theory cannot easily explain. This paper focuses on the spatial pattern of Johannesburg, and finds that it is highly fragmented: first North-South Division due to apartheid and gold mining, secondly, the continuous sprawl due to population densification, and thirdly formation of city-region due to the fill-in spatial policy. The fragmented spatial pattern undermines the social integration and weakens the potential economic sustainability, which make the balanced multi-core spatial pattern inevitable under the influence of the international planning thought. The Johannesburg's spatial transformation comes not only from social integration, but also from the development vison of world-class status of an African city. In reality, since the collapse of apartheid, the municipal government has released series of strategic planning in different executive phase. These different plannings unanimously focus on the world class status although since 2008, the social inclusiveness is more emphasized. Thus, Johannesburg implements some spatial policies, as promoting the corridor of freedom, identifying the key nodes in the city then developing with high density, implementing the in-filling policy, managing the urban growth boundary, effectively preserving the natural system. However, the industrial structure in Johannesburg is already quite high-ended which cannot produce many jobs and also require much investment in advanced infrastructure. Thus, the strategic goals of world-class status of an African city and social inclusiveness which really need widely shared public services to some extent are in tension. After evaluation, we can see that spatial transformation is quite limited. Obviously spatial transformation largely depends on the social-economy. The population is still in flow. In this sense Johannesburg must energetically support the employment-based industry, effectively control the spatial sprawl and carry out institutional innovation which further incentive investment, gradually build an integrated regional governance. In general, how Johannesburg combines globalization and its own condition is still worth thinking in both theory and practice.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.34-34
• /
• 2021

본 연구에서는 격자기반 분포형 수문모델링을 통해 하천갈수량을 추정하고자 한다. 분포형 수문모형은 단방향흐름 알고리즘에 의한 토양 물수지식을 기반으로 개발되었으며 운동파(kinematic wave) 이론을 적용하여 지표 및 지표하 유출을 모의한다. 또한, 격자별로 수문학적 물수지요소인 차단량, 증발산량, 침투 및 침루량, 지하수충전량 등을 계산하며, 댐·보 방류량을 해당 지점 격자의 물수지에 적용할 수 있도록 개발하였다. 본 모형은 2개의 다목적댐과 3개의 다기능보가 위치한 금강유역(9,645.5 km²)에 적용하였으며, 유역 면적과 하천 유속을 고려하여 1 km × 1 km 격자를 구성하고 10분 간격으로 2013년부터 2020년까지 수문모의를 진행하였다. 모형의 입력자료로 유역 인근의 12개 기상관측소로부터 시단위 기상자료를 구축하였으며, 모형의 검보정은 일단위 관측유량(Q), 플럭스 타워 증발산량, 실측 토양수분 및 지하수위 자료를 구축하여 활용하였다. 댐 및 보 지점에 대해 Q와 1/Q로 검보정을 수행한 결과, 평균 결정계수(R²)는 댐 지점에서 0.53~0.65, 보 지점에서 0.46~0.69의 값을 나타냈으며, Nash-Shtcliffe efficiency(NSE)는 댐 지점에서 0.46~0.55, 보 지점에서 0.31~0.65의 값을 나타냈다. 공간 보정을 위해 증발산량, 토양수분, 지하수위에 대한 검보정을 수행할 예정이며, 유황곡선을 활용하여 하천차수, 토양속성 및 토지이용에 따른 하천갈수량을 분석할 예정이다.

• Journal of The Geomorphological Association of Korea
• /
• v.28 no.2
• /
• pp.31-44
• /
• 2021

Due to recent climate change, continuous soil loss is occurring in the mountainous watershed. The development of geographic information systems allows the spatial simulation of soil loss through hydrological models, but more researches applied to the mountain watershed areas in Korea are needed. In this study, prior to simulating the soil loss characteristics of the mountainous watershed, the field monitoring and the SWAT and GeoWEPP models were used to simulate and analyze the rainfall and runoff characteristics in the mountainous watershed area of Jirisan National Park. As a result of monitoring, runoff showed a characteristic of a rapid response as rainfall increased and decreased. In the simulation runoff results of calibrated SWAT models, R², RMSE and NSE was 0.95, 0.03, and 0.95, respectively. The runoff simulation results of the GeoWEPP model were evaluated as 0.89, 0.30, and 0.83 for R², RMSE, and NSE, respectively. These results, therefore, imply that the runoff simulated through SWAT and GeoWEPP models can be used to simulate soil loss. However, the results of the two models differ from the parameters and base flow of actual main channel, and further consideration is required to increase the model's accuracy.