• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.479-482
• /
• 2008

Since late of 2000, KIER has developed a novel pyrolysis process for production of fuel oils from polymer wastes. It could have been possible due to large-scale funding of the Resource Recycling R&D Center. The target was to develop an uncatalyzed, continuous and automatic process producing oils that can be used as a fuel for small-scale industrial boilers. The process development has proceeded in three stages bench-scale unit, pilot plant and demonstration plant. As a result, the demonstration plant having capacity of 3,000 tons/year has been constructed and is currently under test operation for optimization of operation conditions. The process consisted of four parts ; feeding system, cracking reactor, refining system and others. Raw materials were pretreated via shredding and classifying to remove minerals, water, etc. There were 3 kind of products, oils(80%), gas(15%), carbonic residue(5%). The main products i.e. oils were gasoline and diesel. The calorific value of gas has been found to be about 18,000kcal/$m^3$ which is similar to petroleum gas and shows that it could be used as a process fuel. Key technologies adopted in the process are 1) Recirculation of feed for rapid melting and enhancement of fluidity for automatic control of system, 2) Tubular reactor specially-designed for heavy heat flux and prevention of coking, 3)Recirculation of heavy fraction for prevention of wax formation, and 4) continuous removal & re-reaction of sludge for high yield of main product (oil) and minimization of residue. The advantages of the process are full automation, continuous operation, no requirement of catalyst, minimization of coking and sludge problems, maximizing the product(fuel oil) yield and purity, low initial investment and operation costs and environment- friendly process. In this presentation, background of pyrolysis technology development, the details of KIER pyrolysis process flow, key technologies and the performances of the process will be discussed in detail.

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.3
• /
• pp.53-56
• /
• 2017

Laser cladding is a technique for forming beads by melt-sintering with a laser while directly feeding metal powder onto the base material through nozzles. This technique, which is applied in laser surface treatment technology, is useful for repairing broken or worn parts by allowing selective formation of the surface layer of the base metal material. In this paper, laser cladding process was performed on STS316L powder using high power continuous wave laser with IR wavelength and the cladding characteristics according to process conditions were experimentally analyzed.

• Journal of Chest Surgery
• /
• v.21 no.6
• /
• pp.1084-1094
• /
• 1988

Conservative management of 3 iatrogenic perforations of intrathoracic esophagus was reviewed. The primary disorders were achalasia in 2 patients and congenital tracheoesophageal fistula in 1 patient. Perforation occurred after treatment of the primary disorders in the distal esophagus in 2 patients and mid-thoracic esophagus in 1 patient. All the perforations appeared late after the previous treatments and the inflammation spread to mediastinum and pleural cavity in all the 3 patients. Conservative management of esophageal perforation was carried out with intraluminal drainage from the perforated site of esophagus[insertion of Levin`s tube and continuous suction], pleural drainage and feeding of liquid diet through gastrostomy tube with Fowler`s position. The patients revealed spontaneous closure of perforated sites about 3 to 4 weeks after this conservative management without open thoracotomy. This result suggests that this conservative management may be accepted as therapeutic method in the thoracic esophageal perforations regardless of cause and time of the perforation.

• Journal of environmental and Sanitary engineering
• /
• v.14 no.4
• /
• pp.29-34
• /
• 1999

1.The domestic waste generated in Iksan city was 177 tons a day last year. 27 tons of that were recycled daily. Due to increased awareness the recycling rate also increased. 2. It is preferred to get continuous publicity and to enforce the program steadily to activate exchange centers and places like a flea market for reusable things, which will lead to increase the life-span of the current designated landfill site. 3. Because burying food waste in underground will be prohibited from year 2005, the reutilization of food waste by feeding domestic animals like ducks and making artificial fertilizer are preferred. 4. The case of Iksan city is expected to be a model to other cities by establishing a display room to accommodate its detail work demonstration, displaying modeled utilization items and exchange center, incinerator, duck ranch, lawn ground, etc. for making a city as an environmental preservation city model.

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.301-304
• /
• 2000

Fed-batch culture was designed to increase cell concentration and astaxanthin content by mutant AJ-6 of Phaffia rhodozyma. Fed-batch culture was performed in the continuous feeding with manual adjustment of flow rate to control glucose concentration. When the final glucose concentration was 100 g/L, the cell and astaxanthin were 38.3 g/L, 34.8 mg/L, respectively. Addition of ethanol(10 g/L), when glucose was depleted, the cell and astaxanthin concentration were 37.2 g/L and 45.6, respectively, 5 g/L of acetic acid supplied, 40.6 g/L, 43.9 mg/L were obtained. Ethanol and acetic acid enhanced the astaxanthin content act as precursor of carotenoid synthesis.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.611-617
• /
• 2003

This study was performed to develop the method for producing industrial coal sources by cleaning Korean anthracite. Laboratory hindered-settling separation column was set and three coal samples were used for tests. Tests were conducted to evaluate the effects of the major operating variables, teeter water flow rate and relative column pressure (set point). Additional tests were performed to elevate the yield and properties of the products using air bubble injecting process. In results, nice products were obtained with high teeter water flow rate and air bubble injection. Also, model of continuous hindered-settling separation process was established to assist the evaluation of the equipment and several operating variables, such as dispersion, teeter water flow rate, feeding rate, etc.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.9 s.186
• /
• pp.76-83
• /
• 2006

Machining accuracy is closely related with tool deflection induced by cutting forces. In this research, cutting forces and tool deflection in end milling are expressed as a closed form of tool rotational angle and cutting conditions. The discrete cutting fores caused by periodic tool entry and exit are represented as a continuous function using the Fourier series expansion. Tool deflection is predicted by direct integration of the distributed loads on cutting edges. Cutting conditions, tool geometry, run-outs and the stiffness of tool clamping part are considered together far cutting forces and tool deflection estimation. Compared with numerical methods, the presented method has advantages in prediction time reduction and the effects of feeding and run-outs on cutting forces and tool deflection can be analyzed quantitatively. This research can be effectively used in real time machining error estimation and cutting condition selection for error minimization since the form accuracy is easily predicted from tool deflection curve.

• Journal of Chest Surgery
• /
• v.6 no.1
• /
• pp.95-100
• /
• 1973

This is a report on a total of four cases of esophageal perforation due to fish bone in the Department of Thoracic Surgery, Hanyang University Hospital. The perforated portions of esophagus were upper third of esophagus, that is, cervical esophalgus principally. The complications after esophageal perforation were acute mediastinitis with mediastinal emphysema in 2 cases, acute mediastinitis with both pyothorax in one case and cervical subcutaneous abscess alone in one case. Collar mediastinostomy was required to control disturbance of cardiopulmonary function as emergency procedure. Gastrostomy was of worthy for the various purposes, that` is, for feeding, absolute rest of the esophagus, and for prevention against continuous infection from esophageal leakage. After the gastrostomy. 3 cases were healed by spontaneous closure of esophageal perforation between one to four weeks. One case expired from severe septic shock due to acute diffuse mediastinitis and both pyothorax.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.149-154
• /
• 1990

In this paper, simulation results of a robust digital tracking controller on a robotic manipulator are presented. The objective is to follow a ramp reference input with zero steady state error in the presence of a disturbance and system parameter variations. Some of the difficulties are caused by the Coulomb frictions, the disturbance due to the gravitational pull, the spring effect of a link between the drive motor and the manipulator arm. Another difficulty is that, because of the non-differentiable Coulomb friction, the digital control system cannot be represented as a discrete system. It is thus necessary to design the controller based on a discrete-continuous hybrid model. The controller is based on feeding back the state variables and augmenting the system by addition discrete integrators. The feedback gain parameters are obtained by applying the quadratic optimal control theory and then choosing the new weighting matrices to eliminate the limit cycle by using the describing function method for hybrid system.

• Journal of Microbiology and Biotechnology
• /
• v.5 no.4
• /
• pp.229-233
• /
• 1995

Acremonium chrysogenum was immobilized in ionotropic gel beads to develop semi-continuous production of cephalosporin C (CPC). Barium alginate beads were more stable than calcium alginate or strontium alginate beads in chemically defined media. The gel stability of Ba-alginate was further increased by cross-linking with polyethyleneimine (PEI). The presence of carboxymethyl cellulose inside Ba-alginate beads did not reduce mass transfer resistance. Ba-alginate microbeads that had little diffusion limitation increased CPC production rate 1.6 fold higher than that of normal beads. CPC fermentation with immobilized cells in Ba-alginate microbeads was performed continuously for 40 days by way of repeated fed-batch operations. Mathematical modeling was developed to describe the repeated fed-batch fermentation system. Results of the computer simulation agreed well with the experimental data, which made it possible to predict an optimal feeding rate that could maximize total CPC productions.