• 마이크로전자및패키징학회지
• /
• 제24권3호
• /
• pp.53-56
• /
• 2017

Laser cladding is a technique for forming beads by melt-sintering with a laser while directly feeding metal powder onto the base material through nozzles. This technique, which is applied in laser surface treatment technology, is useful for repairing broken or worn parts by allowing selective formation of the surface layer of the base metal material. In this paper, laser cladding process was performed on STS316L powder using high power continuous wave laser with IR wavelength and the cladding characteristics according to process conditions were experimentally analyzed.

• 한국정보통신학회논문지
• /
• 제7권5호
• /
• pp.1076-1081
• /
• 2003

본 논문에서는 반도체레이저를 이용한 밀리미터파 대역의 신호를 생성하는 방법에 대해 제안하였다. 광대역에서의 밀리미터파 신호를 얻기 위해서는 윈하는 공진 주파수대역의 신호를 얻기 위해는 서브 하모닉의 좁은 신호 성분의 하모닉 신호인 다중의 신호를 서로 beating하여 원하는 주파수 대역의 신호를 얻을 수 있다. 따라서 본 논문에서는 반도체레이저를 사용한 광주입 방법을 통하여 실제적으로 원하는 주파수 대역의 신호를 얻기 위해 실험적으로 고찰하였으며, 신호 성분의 성능을 구하기 위해 phase noise 성분을 측정하였다.

• Journal of Welding and Joining
• /
• 제7권4호
• /
• pp.12-21
• /
• 1989

Laser beam welding parameters have experimentally investigated, using a continuous wave 3kW $CO_2$ laser with the various travel speeds, beam mode and laser beam power in low carbon steels. An optimum position of focus and the effect of shielding gas on penetration depth with varying the flow range of 0.5 to 5.1m/min have been combined to investigate the effect of laser power and travel speed on penetration depth and bead width. It is found that the optimum position of focus in 3kW class laser is 0.5 to 1.5mm below the surface of the material. The flow rate of shielding gas affects the penetration depth and He is more effective than Ar. The penetration depth in laser welds of low carbon steels is between two and four times of the bead width. Laser beam welding of butt joints in 2mm thick carbon steel has been carried out to establish a weldability lobe. The lobe indicating acceptable welding conditions is introduced.

• 한국광학회지
• /
• 제27권3호
• /
• pp.95-100
• /
• 2016

본 논문에서는 이터븀(Yb)이 첨가된 이중 클래딩 광섬유를 이용한 고출력 고품질 준연속 레이저 시스템에 대한 연구 개발과 레이저 특성에 대해 보고한다. 이론적 수치 모사를 통해 최적화된 준연속 레이저 발진 조건을 찾았고, 그것을 바탕으로 공진기 구조와 MOPA (Master-Oscillator Power-Amplifier) 구조를 가진 광섬유 레이저 시스템을 각각 구축하였다. 두 레이저 시스템 모두 10 Hz 반복률, 10 ms로 작동시킬 때 최고 평균 출력 >150 W, 첨두 출력 >1.5 kW 이상의 준연속 레이저 빔을 발생시키는데 성공하였고, 레이저 발진 특성 및 빔 특성을 각각 비교하였다. 그리고 향후 더 높은 출력을 얻기 위한 방법과 전망에 대해 논의할 것이다.

• Journal of Welding and Joining
• /
• 제26권5호
• /
• pp.49-59
• /
• 2008

Hastelloy C-276, corrosion resistant alloy at high temperature, is used in chemical plant and power generation industry. In this study, process parameter of laser welding for welding property in Hastelloy C-276 using a continuous wave Nd:YAG laser was studied. As the result of experiment, laser welding did not show segregation or crack at heat affected zone compared to conventional GTWA welding. The melting zone showed cell dendritic structure along with welding line. In addition, planer front solidification is occurred from welding structure, and it was progressed to cellular solidification. Optimal process parameter for butt welding was 1.2kW and 2.0 m/min for laser power and welding speed, respectively. While heat input, output density, tensile stress, and longitudinal strain was $441.98{\times}103$ J/cm2, $29.553{\times}103$ W/cm2, 768 MPa, and 0.689, respectively. Lap welding of the same material showed greater discrepancy in tensile property during 1 line and 2 line welding. For 1 line welding, tensile stress was about 320 MPa, and 2 line showed slightly larger tensile stress. However, strain was decreased by 20%. From this result, lap welding of the same material, Hastelloy C-276, with 2 line welding is considered to be more effective process than 1 line welding with consideration of mechanical property.

• Journal of the Optical Society of Korea
• /
• 제2권2호
• /
• pp.64-73
• /
• 1998

We have theoretically analyzed and experimentally observed the effects of wavelength dependent birefringence inside a laser cavity on the output characteristics of fiber lasers with a figure eight geometry. The spectral and polarization characteristics of fiber lasers are found to be very susceptible to the resultant birefringence composed of the intrinsically existing wavelength dependent birefringence and the externally induced birefringences inside the fiber. For the variation of twist-induced birefringence inside the nonlinear amplifying loop mirror, the laser output power and center wave-length of continuous wave lasers change periodically, but the polarization characteristics remains nearly unchanged. The changes of the birefringence inside the linear loop has little effect on the spectral characteristics but changes the polarization properties such as the polarization direction.

• 한국추진공학회지
• /
• 제12권3호
• /
• pp.1-8
• /
• 2008

본 연구에서는 고출력 레이저에 의한 고에너지 물질의 점화 현상 모델을 제시하였다. 본 모델에서는 강판에 긴 조사 시간을 가진 펄스 레이저를 조사하여 발생한 어블레이션에 의한 열 확산을 고려하였고, 수 kW의 continuous 레이저를 폭약에 조사하여 폭약이 열에 의하여 점화하는 현상을 실험 결과와 비교를 통해 검증하였다. 여기서는 매우 짧은 조사 시간(femto- 혹은 pico-second)을 가진 펄스 레이저에서 나타나는 전자에 의한 효과는 무시 되었다. 본 연구에 사용된 폭약은 RDX, TATB 그리고 HMX이며, 제시한 모델은 실험 결과와 흡사한 결과를 도출하였다.

• Journal of the Korean Physical Society
• /
• 제73권9호
• /
• pp.1279-1282
• /
• 2018

This paper reports the deposition of a metal line using a multilayer stack and laser-induced forward transfer (LIFT) using a low cost continuous wave blue laser with a wavelength of 450 nm. The donor structure was composed of a light-to-heat (LTH) layer, a release layer, and a transfer layer in series. Amorphous silicon as the LTH layer absorbs photon energy and converts it to heat. A release layer was melted so that a silver transfer layer would be transferred to the receiver substrate. The transferred silver layer showed reasonable physical and electrical characteristics. A low cost fine linewidth metal layer could be achieved using this modified LIFT technique and blue laser.

• 한국레이저가공학회지
• /
• 제6권2호
• /
• pp.19-26
• /
• 2003

6061 aluminum alloy sheets were I-square butt welded using a continuous wave Nd:YAC laser. Heat inputs were varied from 54.6 to 80 J/mm for butt welding using different sets of the laser power and the weld speed. I-square butt welds were also made with and without Ar shielding gas. The effect of Ar shielding gas and heat input on the mechanical properties and formability was investigated using Vickers hardness, transverse-weld tensile and bulge test. Porosity on the weld beads and sections and hot crack on the fracture surfaces of transverse-weld tensile test specimens were investigated using optical and scanning electron microscopy The experimental results showed that mechanical properties and formability of 6061 aluminum alloy laser welds were degraded compared to those of base metal. Mechanical properties and formability of 6061 aluminum alloy laser welds were not substantially changed when Ar shielding gas was supplied or heat inputs were varied.

• 한국레이저가공학회지
• /
• 제9권1호
• /
• pp.25-29
• /
• 2006

This study aimed to investigate the change of mechanical properties with the rolling direction and shielding condition during laser welding of AZ31 magnesium alloy. AZ31 magnesium alloy sheets of 1mm thickness were welded using a continuous wave Nd:YAG laser with and without Ar shielding gas. The effect of Ar shielding gas and rolling direction on the mechanical properties were investigated using Vickers hardness, transverse-weld tensile. Porosity in the weld metals was investigated using an optical microscope. The experimental results showed that mechanical properties of AZ31 magnesium alloy laser welds were upgraded compared to those of base metal. Mechanical properties of AZ31 magnesium alloy laser welds were not substantially changed when Ar shielding gas was supplied.