• 인터넷정보학회논문지
• /
• 제17권6호
• /
• pp.123-131
• /
• 2016

빅데이터 환경 하에서 프로세스 마이닝은 업무수행 시 발생하는 수많은 데이터들을 활용하여 기업의 ERP시스템 상의 이벤트 로그로부터 프로세스의 수행과 개선에 관련한 많은 정보 및 통찰력을 얻게 해준다. 최근에는 프로세스 마이닝의 최대 강점을 활용하여, 기업조직의 감사업무에 적극적으로 활용하려고 하는 다양한 연구 활동이 활발히 진행 중에 있다. 그러나 프로세스 마이닝을 이용한 영업감사 적용에 관한 최근의 국내 연구는 빅데이터 환경 하에서는 매우 미흡한 실정이다. 이러한 상황에 착안해서, 본 연구는 프로세스 마이닝이 감사 분야에 적용된 기존 연구를 한층 더 강화시킴으로써, 온라인 방식 및 전통적 감사에 최적으로 적용할 수 있는 프로세스 마이닝 적용 방안을 제안하고자 한다. 또한 빅데이터 환경하에서 기업 조직의 리스크 발생 요인들을 사전에 모니터링함으로써, 리스크의 조기 발견 및 이를 예방할 수 있는 상시 모니터링 정보 서비스 시스템을 제안한다. 이를 위해서 리스크 요인을 기반으로 데이터들을 추출하고 평가에 대한 관리기준을 설정한다. 본 논문의 연구의 범위는 영업감사에 있어 실제 사례를 통해 위험요소의 사전 검증 시스템을 설계 한다. 그리고 이러한 영업감사 시스템을 통해 예방감사 실현, 높은 리스크 요인들에 대한 상시 대응, 사기 발생 억제, 규칙 및 지침 위반에 대한 적시조치, 경영환경 변화에 대한 감사 아이템 추가 발굴 체계 구축, 프로세스 개선 중심의 사전적인 컨설팅 감사의 실현, 내부통제 회계제도 준수 및 강화를 행한다. 이 결과로 영업 감사 실시간 관련 통합 모니터링이 강화되어 재무 리스크 회피, 감사기간 단축 및 감사 품질 개선 등의 효과가 나타났다.

• 한국기계가공학회지
• /
• 제11권2호
• /
• pp.27-33
• /
• 2012

A marine propeller is designed for preventing cavitation priority. Cavitation is a phenomenon which is defined as the vibration or noise by dropping the pressure on the high-speed rotation of the propeller. There has to be a enough thrust on the low-speed rotation for preventing cavitation. Thus, it has to be considered in the increasing of the number of blade and the angle of wing to design the propeller. In addition, flow resistance will be increasing by narrowing the width between blades. So high quality surface roughness of the hub to minimize flow resistance is required. Interference problems with tool and neighboring surfaces often take place from this kind of characteristics of the propeller. During 5-Axis machining of these propellers, the excessive local interference avoidance, necessary to avoid interference, leads to inconsistency of cutter posture, low quality of machined surface. Therefore, in order to increase the surface quality, it is necessary to minimize the cutter posture changes and create a continuous tool path while avoiding interference. This study, by using a MC-space algorithm for interference avoidance and a MB-spline algorithm for continuous control, is intended to create a 5-Axis machining tool path with excellent surface quality. Also, an effectiveness is confirmed through a verification manufacturing.

• 한국디지털정책학회:학술대회논문집
• /
• 한국디지털정책학회 2005년도 추계학술대회
• /
• pp.63-81
• /
• 2005

This research is about continuous improvement in productivity for the central and local government administration. It is a comprehensive execution manual that summarizes from preparation to completion of this task. If you follow the process described in this research, you will achieve the following. 1. You will motivate the innovators. 2. You will spare yourself of many trial and errors and risks thus increasing the effectiveness. 3. You will eliminate the obstacles to innovation. 4. You will continue to innovate and will be able to assess the results through visible index.

• International Journal of Quality Innovation
• /
• 제1권1호
• /
• pp.89-96
• /
• 2000

Evolutionary operation (EVOP) is a continuous improvement system which explores a region of process operating conditions by deliberately creating some systematic changes to the process variable levels without jeopardizing the product. It is aimed at securing a satisfactory operating condition in full-scale manufacturing processes, which is generally different from that obtained in laboratory or pilot plant experiments. Information on how to improve the process is generated from a simple experimental design. Traditional EVOP procedures are established on the assumption that the variance of the response variable should be small and stable in the region of the process operation. However, it is often the case that process noises have an influence on the stability of the process. This process instability is due to many factors such as raw materials, ambient temperature, and equipment wear. Therefore, process variables should be optimized continuously not only to meet the target value but also to keep the variance of the response variables as low as possible. We propose a scheme to achieve robust process improvement. As a process performance measure, we adopted the mean square error (MSE) of the replicate response values on a specific operating condition, and used the Kruskal-Wallis test to identify significant differences between the process operating conditions.

• 한국지능정보시스템학회:학술대회논문집
• /
• 한국지능정보시스템학회 2000년도 추계정기학술대회:지능형기술과 CRM
• /
• pp.289-299
• /
• 2000

This study provides an application of datamining approach to CQI(Continuous Quality Improvement) using the discharge summary. First, we found a process variation in hospital infection rate by SPC (Statistical Process Control) technique. Second, importance of factors influencing hospital infection was inferred through the decision tree analysis which is a classification method in data-mining approach. The most important factor was surgery followed by comorbidity and length of operation. Comorbidity was further divided into age and principal diagnosis and the length of operation was further divided into age and chief complaint. 24 rules of hospital infection were generated by the decision tree analysis. Of these, 9 rules with predictive prover greater than 50% were suggested as guidelines for hospital infection control. The optimum range of target group in hospital infection control were Identified through the information gain summary. Association rule, which is another kind of datamining method, was performed to analyze the relationship between principal diagnosis and comorbidity. The confidence score, which measures the decree of association, between urinary tract infection and causal bacillus was the highest, followed by the score between postoperative wound disruption find postoperative wound infection. This study demonstrated how datamining approach could be used to provide information to support prospective surveillance of hospital infection. The datamining technique can also be applied to various areas fur CQI using other hospital databases.

• 한국콘텐츠학회논문지
• /
• 제17권7호
• /
• pp.44-55
• /
• 2017

최근에 많은 기업들이 기업 목표를 달성하기 위해 프로세스 혁신이나 개선을 지속적으로 꾀하고 있으며, 이를 지원하는 도구로 BPM (Business Process Management)이 많이 도입되고 있다. BPM의 생애 주기는 프로세스 진단, (재)설계 및 실행으로 이루어지는데, 모든 BPM 활동들은 성과 척도와 밀접한 관련을 갖고 운영되어야 한다. 본 논문의 목적은 프로세스 기반 성과 측정 모델과 통합된 생애 주기 기반 BPM 프레임워크를 제안하는 것이다. 제안 프레임워크에서는 BPM 전 생애 주기 동안 비즈니스 프로세스와 성과 척도가 체계적인 상관관계를 가지고 밀접하게 운영된다. 기업의 혁신이나 개선 담당자들은 제안 프레임워크를 사용하여 프로세스 진단 단계에서는 기업 성과에 가장 영향을 주는 프로세스를 용이하게 확인할 수 있고, 프로세스 (재)설계 단계에서는 새롭게 설계된 프로세스의 성과를 측정할 수 있으며, 프로세스 실행 단계에서는 성과 척도를 모니터하여 비즈니스 활동 들을 조정할 수 있게 된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1442-1445
• /
• 2005

Several test methods, including micro strain/deformation measurement techniques, have been studied to more reliably measure the micro properties in micro/nano materials. Therefore, in this study, the continuous measurement of in-plane tensile strain in micro-sized specimens of thin film materials was introduced using the micro-ESPI technique. TiN and Au thin films 1 and $0.47\;\mu{m}$ thick, respectively, were deposited on the silicon wafer and fabricated into the micro-sized tensile specimens using the electromachining process. The micro-tensile loading system and micro-ESPI system were developed to measure the tensile strain during micro-tensile test. The micro-tensile stress-strain for these materials was determined using the algorithm for continuous strain measurement. Furthermore, algorithm for enhancing the sensitivity to measurement of in-plane tensile strain was suggested. According to the algorithm for enhancement of sensitivity, micro-tensile strain data between interfringe were calculated. It is shown that the algorithm for enhancement of the sensitivity suggested in this study makes the sensitivity to the in-plane tensile strain increase.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2005년도 춘계공동학술대회 발표논문
• /
• pp.585-591
• /
• 2005

Because of the number and complicate relationship, it is difficult to improve the processes and activities in a company. The continuous improvement for ISO 9001, we introduced IDEF Model for re-engineering the ISO9000 Process. A valve maker was selected as a sample company, and we confirmed that several processes can be reduced and several processes can newly be added for effective and more practical operation of a company.

• 한국CDE학회지
• /
• 제8권1호
• /
• pp.58-65
• /
• 2002

Collaborative product commerce(CPC) involves many people working together with heterogeneous and distributed software applications. For such an environment, Workflow Management System(WFMS) can be useful for coordination of people, software agents and processes. It provides diverse services including automatic work muting, project management continuous process improvement and application integration. However, there are some limitations to apply WFMS to CPC environment due to inflexibility and lack of design support facilities. This paper identifies the problems and addresses possible approaches to overcome the difficulties.

• 대한의용생체공학회:의공학회지
• /
• 제9권1호
• /
• pp.87-92
• /
• 1988

In this paper, a new focusing method, to be called the pipelined sampled delay focusing (PSDF), is implemented. This method improves the lateral resolution in ultrasound imaging system. In PSDF, the analog belay lines are no longer necessary because sampling sum process can replace the conventional delay sum process. Also, the method offers continuous dynamic focusing on the resolution pixel basis, and eliminates the constraint that the maximum delay time is less than the sampling interval. Second order sampling is adopted in order to extend the sampling interval.