• 전자공학회논문지A
• /
• 제31A권7호
• /
• pp.29-35
• /
• 1994

The performance of continuous phase modulation signals is well known for the coherent demodulation. But the carrier recovery circuits of the coherent receiver have long acquisition time and the receiver experiences high error floors for fading channels. In this paper, we propose the differential demodulation of 2-h continuous phase modulation signals. The sets of modulation indices of 2-h phase codes adequate to the differential demodulation for differentially encoded input are obtained and the average bit error probability in Additive White Gaussian Noise environments is derived and analyzed.

• 한국통신학회논문지
• /
• 제29권5C호
• /
• pp.611-617
• /
• 2004

The optimum convolutional error correction codes for recently standardized Feher-patented quadrature phase-shift keying (FQPSK-B) modulation are proposed. We utilize the continuous phase modulation characteristics of FQPSK-B signals for calculating the minimum Euclidean distance of convolutional coded FQPSK-B signal. It is shown that the Euclidean distance between two FQPSK-B signals is proportional to the Hamming distance between two binary data sequence. Utilizing this characteristic, we show that the convolutional codes with optimum free Hamming distance is the optimum convolutional codes for FQPSK-B signals.

• 한국전자파학회논문지
• /
• 제16권3호
• /
• pp.286-292
• /
• 2005

인터리브 된 레일리 페이딩 채널에서 비동기식 N-심볼 연속 위상 주파수 변조(Continuous Phase Frequency Shift Keying, CPFSK) 방식을 위한 비트 인터리브 된 부호화 변조(Bit Interleaved Coded Modulation, BICM) 시스템을 설계하고 성능을 분석 하였다. 본 논문에서는 BICM의 설계와 성능 분석을 위하여 비동기식 N-심 볼 CPFSK의 기하학적 등가 정규 제곱 거리(Equivalent Normalized Squared Distance, ENSD)를 사용하였다. 특히 비동기식2-심볼 4진 CPFSK 방식을 위한 BICM 시스템을 설계하였으며, 이 시스템 의 성능을 ENSD를 이용하여 분석하고, 모의실험을 통해 검증하였다.

• 전자공학회논문지A
• /
• 제29A권3호
• /
• pp.8-14
• /
• 1992

In this paper, the differential detection technique of multi-h CPM is introduced and described. We derived the sets of modulation index of multi-h phase codes adequate to the differential detection. The power spectra of multi-h signals with various sets of modulation index are presented and compared to those of MSK and QPSK. Error rate performances of the conventional detector and Viterbi algorithm detector of 2-h and 3-h CPM are evaluated and compared.

• 전기전자학회논문지
• /
• 제16권4호
• /
• pp.364-368
• /
• 2012

광 강도 및 위상변조 후에 단일 모드 광섬유로 첩을 보상함으로서 CW 광원으로부터 10 GHz 초단 펄스를 발생시켰다. 발생된 펄스는 0.64 nm의 스펙트럼 폭과 5.7 ps의 펄스폭을 보임으로서 시간대역 곱이 0.46인 준 변환제한된 펄스임을 보였다.

• Journal of Positioning, Navigation, and Timing
• /
• 제9권4호
• /
• pp.293-304
• /
• 2020

In this paper, various modulation techniques, including the legacy Global Navigation Satellite System (GNSS) signal modulation techniques, are introduced and the spectral characteristics and correlation characteristics of signals with various modulation techniques are analyzed based on numerical simulation. With the development of various GNSS services, the limited frequency band has become increasingly saturated, and issues of interoperability and compatibility have emerged in the new GNSS design. Since the efficient allocation of frequency resources is closely related to spectrum design, modulation techniques are one of the important signal design parameters of new signal design. Signal modulation techniques are closely related to various figure of merits (FoMs) as well as spectrum characteristic, and in some cases there is a complicated trade-off between FoMs. Thus, the FoMs associated with modulation technology should be analyzed and the best signal candidates should be chosen carefully via the trade-off analysis for FoMs. In this paper, we define the modulation technique based on Phase Shift Keying (PSK), Binary Offset Carrier (BOC) and Continuous Phase Modulation (CPM) for the design of KPS signals, and the FoMs of signals in terms of spectrum and correlation function are evaluated. Signals with various modulation techniques are implemented through a numerical simulation, and the relevant FoMs are analyzed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권3호
• /
• pp.1140-1155
• /
• 2021

Up to now, many state-of-arts have been proposed for two-way relaying system with linear modulations. The performances of antenna selection (AS) at both transmit and relay nodes need to be investigated in some two-way relaying multiple-input multiple-output (TWRM) systems. In this paper, the goal is focused on the study of nonlinear modulations, i.e., continuous phase modulation (CPM) in TWRM systems. Firstly, the joint phase trellis are simplified by reversed Rimoldi processing so as to reduce the systems' complexity. Then the performances of joint transmit and receive antenna selection (JTRAS) with CPM modulations in two-way relaying MIMO systems are analyzed. More exactly, the pair wise probability (PEP) is used to evaluate the error performance based on the CPM signal matrix, which is calculated in terms of Laurent expression. Since the channels subject to two terminal nodes share common antennas at relay node R in multiple-access scheme, we revise the JTRAS algorithm and compare it to existing algorithm via simulation. Finally, the error performances for various schemes of antenna selection are simulated and compared to the analysis in this paper.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1991년도 제6회 파동 및 레이저 학술발표회 Prodeedings of 6th Conference on Waves and Lasers
• /
• pp.98-101
• /
• 1991

The As2S3 thin film has a characteristics of optical modulation in both amplitude and phase. Since the As2S3 thin film can be used as a real-time reconfigurable optical filter, the fSDF filter can be optically fabricated on it. According to the modulation characteristics of the As2S3, the optimal fSDF filter recorded on this thin plate has the form of continuous amplitude and binary phase. Computer simulation and optical experiments on the optical pattern classification show that the As2S3 is suitable for the optical fSDF filter.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.839-842
• /
• 2004

We present a fast-switching electro-optical device based on flexoelectro-optic effect in short pitch cholesterics oriented in uniform lying helix texture. The device has two operating modes: amplitude and phase modulation mode. The amplitude modulation mode is a fast in-plane switching of the device optic axis that enables to achieve a high percent of modulation of the transmitted light intensity whereas the phase mode gives a continuous change of the refractive index and thus of the phase shift of the transmitted light. By using a small concentration of diacrylate monomer and selecting the illumination conditions we have been able to create a inhomogeneous polymeric network mostly localized at both substrate surfaces and stabilize the two switching modes.

• 한국통신학회논문지
• /
• 제19권6호
• /
• pp.1064-1074
• /
• 1994

본 논문에서는 주파수 선택성 페이팅 채널의 일종인 two-ray 패이딩 채널에서 TCM(trellis coded modulation)을 CPM(continuous phase modulation) 신호에 적용하였을 때 최적의 TCM을 찾고, 이때의 성능 개선치를 평가하였다. CPM 신호로는 비교적 전력 효율 및 대역 효율이 좋은 IREC, 3RC 및 GMSK를 선택히여 변조 지수를 0.1에서 0.6으로 변화시켜 각 변조 지수에서 성능을 평가하였다. 그리고 TCM을 구성하는 부호기의 구속 길이는 2와 3으로 하였다. 성능평가 결과 구속 길이가 3인 최적의 TCM은 변조지수가 0.5일때 페이딩 채널에서 부호화 되지 않은 경우와 비교하여 1 REC에서 약 2.0dB의 전력이득이 있고 3RC에서 약 2.1dB의 전력 이득이 각각 있었다. 따라서 본 논문에서 제시한 최적의 TCM을 디지털 이동 통신에 적용할 경우 상당한 선로 품질의 향상을 이룰 수 있으리라고 기대된다.