• 제어로봇시스템학회논문지
• /
• 제4권1호
• /
• pp.76-81
• /
• 1998

This paper presents an on-line scheme for parameter estimation of continuous-time systems, based on the model adjustment technique and the genetic algorithm technique. To deal with the initialisation and unmeasurable signal problems in on-line parameter estimation of continuous-time systems, a discrete-time model is obtained for the linear differential equation model and approximations of unmeasurable states with the observable output and its time-delayed values are obtained for the nonlinear state space model. Noisy observations may affect these approximation processes and degrade the estimation performance. A digital prefilter is therefore incorporated to avoid direct approximations of system derivatives from possible noisy observations. The parameters of both the model and the designed filter are adjusted on-line by a genetic algorithm, A set of simulation works for linear and nonlinear systems is carried out to demonstrate the effectiveness of the proposed method.

• 한국지능시스템학회논문지
• /
• 제21권2호
• /
• pp.206-211
• /
• 2011

본 논문에서는 연속적인 파라미터 공간에 대한 최적화에 대해 진화적 알고리즘의 특징적인 형상화를 제시한다. 이 방법은유전알고리즘이 연속적인 탐색공간에서의 파라미터 식별에 대해 가장 강점을 지녔다는 점에 착안한 것이다. 유전알고리즘과 제안한 알고리즘과의 주요한 차이점은 개별적 또는 연속적인 묘사의 차이가 있다는 것이다. 잘 알려진 실험함수의 최적화문제를 도입하여 연속 탐색공간 문제에 대해 제안하는 알고리즘에 대해 계산시간 및 사용메모리 등의 성능이 우수하다는 효율성을 보였다.

• 한국해양공학회지
• /
• 제18권5호
• /
• pp.29-35
• /
• 2004

A new approach, referred to as a successive zooming genetic algorithm (SZGA), is proposed for identifying a global solution, using continuous zooming factors for optimization problems. In order to improve the local fine-tuning of the GA, we introduced a new method whereby the search space is zoomed around the design variable with the best fitness per 100 generation, resulting in an improvement of the convergence. Furthermore, the reliability of the optimized solution is determined based on the theory of probability, and the parameter used for the successive zooming method is optimized. With parameter optimization, we can eliminate the time allocated for deciding parameters used in SZGA. To demonstrate the superiority of the proposed theory, we tested for the minimization of a multiple function, as well as simple functions. After testing, we applied the parameter optimization to a truss problem and wicket gate servomotor optimization. Then, the proposed algorithm identifies a more exact optimum value than the standard genetic algorithm.

• 대한기계학회논문집A
• /
• 제24권9호
• /
• pp.2302-2312
• /
• 2000

An active control of the transmission of noise through an aircraft fuselage is investigated numerically. A cylinder-cavity system was used as a model for this study. The fuselage is modeled as a fi nite, thin shel cylinder with constant thickness. The sound field generated by an exterior monopole source is transmitted into the cavity through the cylinder. Point force actuators on the cylinder are driven by error sensor that is placed in 3D cavity. Modal coupling theory is used to formulate the numerical models and describe the system behavior. Minimization of the acoustic potential energy in the fuselage is carried out as a performance index. Continuous parameter genetic algorithm is used to search the optimal actuator position and both results are compared.

• Journal of Information Processing Systems
• /
• 제16권5호
• /
• pp.1169-1182
• /
• 2020

The ant colony optimization (ACO) algorithm is a classical metaheuristic optimization algorithm. However, the conventional ACO was liable to trap in the local minimum and has an inherent slow rate of convergence. In this work, we propose a novel combinatorial ACO algorithm (CG-ACO) to alleviate these limitations. The genetic algorithm and the cloud model were embedded into the ACO to find better initial solutions and the optimal parameters. In the experiment section, we compared CG-ACO with the state-of-the-art methods and discussed the parameter stability of CG-ACO. The experiment results showed that the CG-ACO achieved better performance than ACO_R, simple genetic algorithm (SGA), CQPSO and CAFSA and was more likely to reach the global optimal solution.

• Structural Engineering and Mechanics
• /
• 제80권5호
• /
• pp.539-551
• /
• 2021

With the continuous increase of computational capacity, more and more complex nonlinear elastoplastic constitutive models were developed to study the mechanical behavior of elastoplastic materials. These constitutive models generally contain a large amount of physical and phenomenological parameters, which often require a large amount of computational costs to determine. In this paper, an inverse parameter determination method is proposed to identify the constitutive parameters of elastoplastic materials, with the consideration of both strain rate effect and temperature effect. To carry out an efficient design, a hybrid optimization algorithm that combines the genetic algorithm and the Nelder-Mead simplex algorithm is proposed and developed. The proposed inverse method was employed to determine the parameters for an elasto-viscoplastic constitutive model and Johnson-cook model, which demonstrates the capability of this method in considering strain rate and temperature effect, simultaneously. This hybrid optimization algorithm shows a better accuracy and efficiency than using a single algorithm. Finally, the predictability analysis using partial experimental data is completed to further demonstrate the feasibility of the proposed method.

• 한국수자원학회논문집
• /
• 제40권10호
• /
• pp.823-832
• /
• 2007

본 연구에서는 강우강도식의 매개변수를 추정하기 위해서 다목적 유전자알고리즘의 목적함수로 RMSE와 RRMSE를 적용하여 보다 객관적인 기준으로 장 단기간을 구분하는 방법을 제시하였다. 매개변수를 추정하기 위한 장 단기간을 구분하는 방법으로는 정확도를 기준으로한 방법과 그래프상의 접점을 이용하는 방법을 적용하였으며, 기상청에서 관리하는 22개 지점에 대하여 국내에서 널리 사용되고 있는 강우강도식을 이용하여 그 적용성을 살펴보았다. 매개변수를 추정하는 방법에 있어서는 재현기간별로 매개변수를 구하는 방법의 정확도를 평가하였으며, 장 단기간을 구분하는 방법과 함께 재현기간별로 매개변수를 구하는 방법을 적용하였다. 국내에서 널리 사용되고 있는 세 가지 형태의 강우강도식 중에서 가장 높은 정확도를 얻을 수 있는 것은 허준행 등(1999)이 개발한 강우강도식인 것으로 나타났고, 기존의 선형회귀분석을 통해서 매개변수를 추정하는 것보다 다목적 유전자알고리즘을 적용한 결과가 더 높은 정확도를 보여주는 것으로 나타났다.

• 대한기계학회논문집A
• /
• 제25권12호
• /
• pp.2062-2069
• /
• 2001

It has been established that a crack has an important effect on the dynamic behavior of a structure. This effect depends mainly on the location and depth of the crack. To identify the location and depth of a crack in a structure, a method is presented in this paper which uses synthetic artificial intelligent technique, that is, Adaptive-Network-based Fuzzy Inference System(ANFIS) solved via hybrid learning algorithm(the back-propagation gradient descent and the least-squares method) are used to learn the input(the location and depth of a crack)-output(the structural eigenfrequencies) relation of the structural system. With this ANFIS and a continuous evolutionary algorithm(CEA), it is possible to formulate the inverse problem. CEAs based on genetic algorithms work efficiently for continuous search space optimization problems like a parameter identification problem. With this ANFIS, CEAs are used to identify the crack location and depth minimizing the difference from the measured frequencies. We have tried this new idea on a simple beam structure and the results are promising.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.182-188
• /
• 2001

It has been established that a crack has an important effect on the dynamic behavior of a structure. This effect depends mainly on the location and depth of the crack. To identify the location and depth of a crack in a structure, a method is presented in this paper which uses synthetic artificial intelligent technique, that is, Adaptive-Network-based Fuzzy Inference System(ANFIS) solved via hybrid learning algorithm(the back-propagation gradient descent and the least-squares method) are used to learn the input(the location and depth of a crack)-output(the structural eigenfrequencies) relation of the structural system. With this ANFIS and a continuous evolutionary algorithm(CEA), it is possible to formulate the inverse problem. CEAs based on genetic algorithms work efficiently for continuous search space optimization problems like a parameter identification problem. With this ANFIS, CEAs are used to identify the crack location and depth minimizing the difference from the measured frequencies. We have tried this new idea on a simple beam structure and the results are promising.

• Journal of Information Processing Systems
• /
• 제18권1호
• /
• pp.146-158
• /
• 2022

With the success of the digital economy and the rapid development of its technology, network security has received increasing attention. Intrusion detection technology has always been a focus and hotspot of research. A hybrid model that combines particle swarm optimization (PSO) and kernel extreme learning machine (KELM) is presented in this work. Continuous-valued PSO and binary PSO (BPSO) are adopted together to determine the parameter combination and the feature subset. A fitness function based on the detection rate and the number of selected features is proposed. The results show that the method can simultaneously determine the parameter values and select features. Furthermore, competitive or better accuracy can be obtained using approximately one quarter of the raw input features. Experiments proved that our method is slightly better than the genetic algorithm-based KELM model.