• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04c
• /
• pp.115-118
• /
• 2008

A field-oriented UHF system for on-line PD monitoring of transformers. is designed, which has been installed inside the oil tank of a transformer by two ways: on-line installing mode through the oil-valve and pre-installing mode through the man hole/hand hole cover. This system has successfully captured long intermittent discharge signals that hadn't been detected through conventional techniques, and solved the problem successfully. The results demonstrate that UHF technique has great advantages for on-line PD monitoring of transformers. By adopting the peak detection technique, it becomes easy and effective for the transplantation of the phase-resolved pattern recognition technique from conventional method to UHF method, and then to realize continuous on-line monitoring, source characterization and trending analysis.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.448-452
• /
• 2007

Many industrial operations require continuous or nearly-continuous operation of machines, which if interrupted can result in significant financial loss. The condition monitoring of these machines has received considerable attention recent years. Rapid developments in semiconductor, computing, and communication with a remote site have led to a new generation of sensor called "smart" sensors which are capable of wireless communication with a remote site. The purpose of this research is the development of smart sensor using which can on-line perform condition monitoring. This system is addressed to detect conditions that may lead to equipment failure when it is running. Moreover it will reduce condition monitoring expense using low cost MEMS accelerometer. This sensor can receive data in real-time or periodic time from MEMS accelerometer. Furthermore, this system is capable for signal preprocessing task (High Pass Filter, Low Pass Filter and Gain Amplifier) and analog to digital converter (A/D) which is controlled by CPU. A/D converter that converts 10bit digital data is used. This sensor communicates with a remote site PC using TCP/IP protocols. Wireless LAN contain IEEE 802.11i-PSK or WPA (PSK, TKIP) encryption. Developed sensor executes performance tests for data acquisition accuracy estimations.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.242-245
• /
• 2008

Exchange System for mobile communication operator is very important for providing continuous services to customers. However traditional solution is too expensive for choosing in the real environment. In this paper, we suggest cost-effective auto backup monitoring solution, which is robust for system failure. And this suggested solution will also can be adopted to the $4^{th}$ generation of IP core network.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.5 s.43
• /
• pp.259-265
• /
• 2006

As a core area of the new computing paradigm, the Ubiquitous Sensor Network Technology utilizes a wireless sensor networking which can be applied to the Context Information Monitoring System. When the technology is used in a poor user-environment for monitoring purposes, it can cost-effectively gather the context data on real-time basis, analyze the information gathered, effectively response to the user situation, and execute orders to create environmental factors desired by the user. This study structures a system able to monitor information in regards to a user-environment based on wireless-node sensor technology coupled with the Ubiquitous Sensor Network Technology. The proposed system requires a minimal collection of data without continuous monitoring. Monitoring periodically, it can sense the user-environment more efficiently than the existing monitoring technologies based on the wire-communication technology.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2565-2568
• /
• 2003

This paper presents a behavioral data monitoring system based on WAP(wireless application protocol) service for the 24-hour continuous health state monitoring of the elderly and the disabled. The developed system transmits a character message to the predefined mobile cell phone through SMS service when an emergency state takes place. Simultaneously, the image captured by a CCD camera is transmitted to the server computer installed WAP service program. Then, the user of the cell phone who received he message can access the server and open the transmitted image. This system can be used for the effective health monitoring of the elderly and disabled.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.920-923
• /
• 2003

An wearable electrocardiogram (ECG) monitoring system is a widely used non-invasive diagnostic tool for ambulatory patient who may be at risk from latent life-threatening cardiac abnormalities. In this paper, we have a portable ECG monitoring system with conductive fiber which was characterized by the small-size and the low power consumption. The system consists of conductive fibers, one-chip microcontroller, ECG preprocessing circuit, and monitoring software to be able to record and analyze in PC. ECG preprocessing circuit is made of pre-amplifier with gain of 10, band-pass filter with bandwidth of 0.5-120Hz and 2.5V offset circuit for A/D conversion. ECG signals obtained by sensor are included with corrupted noises such as a baseline wandering, 60 Hz power noise and interference noise by body movement. For cancellation corrupted noises in signals obtained by conductive fiber, we used the wavelet decomposition of wavelet transforms in MATLAB toolbox.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.2
• /
• pp.176-180
• /
• 2008

A field-oriented UHF system for on-line PD monitoring of transformers is designed, which has been installed inside the oil tank of transformer in a substation by two ways: on-line installing mode through the oil-valve and pre-installing mode through the man hole/hand hole cover. This system has successfully captured long intermittent discharge signals that hadn't been detected through conventional techniques, and solved the problem successfully. The results demonstrate that UHF technique has great advantages for on-line PD monitoring of transformers. By adopting the peak detection technique, it becomes easy and effective for the transplantation of the phase-resolved pattern recognition technique from conventional method to UHF method, and then to realize continuous on-line monitoring, source characterization and trending analysis.

• Smart Structures and Systems
• /
• v.4 no.6
• /
• pp.711-726
• /
• 2008

A number of efforts had been sought to instrument bridges for the purpose of structural monitoring and assessment. The outcome of these efforts, as gauged by advances in the understanding of the definition of structural damage and their role in sensor selection as well as in the design of cost and data-effective monitoring systems, has itself been difficult to assess. The authors' experience with the design, calibration, and operation of a monitoring system for the Kishwaukee Bridge in Illinois has provided several lessons that bear upon these concerns. The systems have performed well in providing a continuous, low-cost monitoring platform for bridge engineers with immediate relevant information.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.311-316
• /
• 2004

For the location estimation in the conventional LPMS(Loose Parts Monitoring System), it is popular to employ a group delay among the acoustic sensors installed within a 3 ft range from the impact source. However, there exists inherent error in determining the arrival time differences of the generated wave group among the neighboring sensors. To overcome this problem in this study, the two dimensional approach has been proposed and applied to effectively estimate the arrival time differences by using a continuous wavelet transform which is one of the linear time-frequency analysis methods. The experiment has been performed to both the plate model and the real steam generator in a nuclear power plant. It is expected that the reliability of the location estimation could be enhanced when the proposed time-frequency method is introduced into the LPMS system.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.8
• /
• pp.803-807
• /
• 2008

The ubiquitous middleware configurated an aggregation of the various services. The services are made in different languages and the various services that are dynamically changing environment are carried out in collaboration service. The ubiquitous system that services in the these environment is required appropriate response to real-time system and reliability. In this paper, we suggest the monitoring agent that a monitoring system added or removed the services in real-time is made continuous monitoring in run-time environment and guaranteed performance and reliability of a application by maximally reducing overhead that combined with applications is occurred. The suggested scheme shows the demonstration to fit the scenario situation and verifies function and performance of monitoring about the service applications through the experiment.