• Fashion & Textile Research Journal
• /
• v.23 no.6
• /
• pp.844-851
• /
• 2021

Due to the increase in consumers' interest about well-being, interest in eco-friendly products has been increasing due to the harmful effects of various harmful substances contained in textile products and environmental issues. As a result, natural dyes of less potential risk than synthetic dyes and digital textile printing(DTP) textile products with less environmental pollution are drawing attention. However, due to the lack of evaluation criteria for DTP textile products with natural ink and the nature of many colors are stacked layer by layer for dying, the need for simultaneous analysis is emerging. To evaluate whether the natural dye is derived from natural ingredients, the biocarbon content is analyzed. However, in the case of ink made using natural dyes and DTP textile products using natural ink, it is difficult to analyze the biocarbon content due to the limitation of the presence of a small amount of dye contained therein. In this study, we were shown the possibility of natural derived verification by cross-checking the analytes of natural dyes (Persicaria tinctoria, an indigo dye; Dactylopius coccus, a light red; and Curcum longa L., i.e., turmeric) and natural ink with HPLC-MS/MS. The coefficient of determination was 0.999 or higher, the limit of quantification was 0.647-3.664 ㎍/L and a %RSD of each indicator material was less than 10. Then, the extraction amount of natural dyes for five patterned fabrics was analyzed.

• Journal of The Korean Association of Information Education
• /
• v.26 no.2
• /
• pp.121-128
• /
• 2022

In the 2022 revised curriculum general study released by the Ministry of Education in September 2021, environmental issues are emerging as a socially important topic, with climate and environmental education appearing at the forefront along with software education. In this study, by applying Python Monte Carlo simulation, a program for high school students was developed that combines environmental education and software education emphasized in the 2022 revised curriculum. The developed program verified the validity of the program with Lawshe's Content Validity Ratio for science, environment, and information subject education experts, and the verification results showed that the program meets the development purpose, environment, and information subject achievement standards.

• Journal of Industrial Convergence
• /
• v.20 no.12
• /
• pp.27-37
• /
• 2022

This study aims to identify the nature and content of the desired nursing personality of clinical nurses and provide basic data for securing nursing competencies and providing quality nursing as clinical nurses. This is a qualitative study with a focused group analysis to comprehensively explore the desirable nurse personality expected in clinical nursing settings. From November 30, 2019 to Jan 20, 2020, 6 nurses with more than 5 years of clinical experiences and working in a regional university hospital participated in the four focus group interviews. The collected qualitative data was analyzed by the content analysis method. The personality required of clinical nurses is 'process of self-regulation and effort for patient care', 'components for human-centered nursing', 'influence to create healthy interpersonal relationships', and 'nursing'. Configure and operate the organization. It was analyzed into a total of five main themes and 17 sub-themes: "Influence to make changes" and "Influence to bring about organizational change and results." This study confirms the desirable elements of personality in nursing practice, and proposes the application and effect verification research of clinical nursing education programs for nurses in order to secure the nursing competence of professionals and provide high-quality nursing care in the future.

• Journal of Engineering Education Research
• /
• v.25 no.6
• /
• pp.93-102
• /
• 2022

Due to COVID-19, all activities in society are emphasized non-face-to-face, and the educational environment is changing without exception. Looking at the results of the survey after conducting non-face-to-face education, there was a lot of rejection of non-face-to-face practical education. The biggest reason was that instructors were not familiar with the non-face-to-face education method, and feedback was not smooth during or after education. In particular, software practice education was not easy to share the software development environment, but communication and feedback on class contents and tasks were important. In particular, if face-to-face and non-face-to-face are alternately variable, it is not easy for practical education to be consistently connected. Even if non-face-to-face hands-on education is changed to face-to-face hands-on education, we will present a plan to use a data sharing system such as question-and-answer, assignment, practice content, and board content so that it can proceed smoothly. This study presents an efficient software education process that can provide learners with a software integrated practice environment based on a shared server, question-and-answer between instructors and learners, and share feedback on tasks. For the verification of the presented process, the effectiveness was confirmed through the survey results by applying the face-to-face/non-face-to-face education process to 220 trainees for 30 months in software education classes such as A university hands-on education, B company new employees, and ICT education courses.

• Journal of Aerospace System Engineering
• /
• v.16 no.1
• /
• pp.12-16
• /
• 2022

Currently, Induction welding is attracting attention as a non-contact, clean and fast welding process. However, since thermoplastic resins are not affected by electromagnetic fields, induction welding requires a heating element called a susceptor. Researches are being conducted with the aim of achieving high-quality bonding, however, the factor of a heating element is an issue, hence the need to set a standard. Specimen fabrication and testing are conducted according to ASTM D5868. In this study, we propose that the evaluation criteria be judged on the basis of three factors; the condition of the welded joint surface, void content, and lap shear strength. Since the adhesive surface to be welded melts and solidifies as it cools, rapid temperature changes can generate pores. In addition, if the heating is not uniform, it is difficult to expect the desire performance. Using PA6 (CF 30%) thermoplastic, susceptor fabrication, induction welding and performance verification were conducted.

• Korean Medical Education Review
• /
• v.25 no.2
• /
• pp.159-173
• /
• 2023

The purpose of this study was to develop and validate a competency tool for new nurses and to pilot-test it with new nurses. A Delphi survey was conducted to develop a competency tool, and a self-evaluation was conducted among new nurses who pilot-tested the finally derived competencies. The Delphi survey panel consisted of 18 people, including adjunct professors at the College of Nursing, nursing managers, and nurses with master's degrees. The Delphi survey asked about the validity of the competencies constructed in two rounds. After analyzing the Delphi results with mean, standard deviation, content validity ratio, degrees of convergence, and degrees of consensus, 12 core competencies and 36 enabling competencies were finally derived. The competencies consisted of clinical judgment and management (nine items), task competence (four items), patient orientation (five items), moral value orientation (three items), cooperation (two items), supply management (two items), professional development (three items), confidence (one item), self-control (two items), flexibility (two items), influence (one item), and nurturing others (two items). The finally derived competencies were pilot-tested with 229 new nurses who had worked for 2-12 months. The self-evaluation scores of new nurses were distributed differently according to their working period. In this study, the competencies required for new nurses were identified and the corresponding enabling competencies were identified. In the future, it is expected that a competency-based education program will be prepared based on these findings, and furthermore, it will be possible to provide high-quality medical and nursing services that meet patients' needs by improving the competency of new nurses and lowering the turnover rate.

• Human Ecology Research
• /
• v.61 no.3
• /
• pp.349-360
• /
• 2023

This study aimed to develop, and evaluate the effectiveness of, a home economics dietary education program that could be used to improve high school students' sustainable dietary competencies. To achieve this goal, learning objectives and elements were selected for the education program to improve the students' sustainable dietary competency. The content validity of this program was verified with numerous experts. After implementing the new educational program, its effect on high school students' sustainable dietary competencies was assessed through pre- and post-tests. The results of this study are summarized as follows. First, through the textbook analysis, the necessity of developing an educational program that can cultivate the three areas that constitute a sustainable diet (environment, health, and consideration) was confirmed. Second, a total of nine teaching and learning plans for sustainable dietary education programs were developed. From there, content validity verification was conducted by experts, indicating that the developed educational program was highly applicable in the field. Third, after the implementation, a survey was conducted based on a questionnaire consisting of 20 items related to three areas of sustainable diet, while the pre- and post-test assessment indicated statistically significant differences in all three areas: environment (pre: 3.40, post: 4.46, p<.001), health (pre: 3.15, post: 4.32, p<.001), and consideration (pre: 3.46, post: 4.48, p<.001). It is expected that the educational program developed in this study will be used as a basis for dietary education that fosters food citizenship in high school home economics courses.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.6
• /
• pp.917-935
• /
• 2020

In this study, an automated sensor to measure forest fire surface fuel moistures was developed to predict changes in the moisture content and risk of forest fire surface fuel, which was indicators of forest fire occurrence and spread risk. This measurement sensor was a method of automatically calculating the moisture content of forest fire surface fuel by electric resistance. The proxy of forest fire surface fuel used in this sensor is pine (50 cm long, 1.5 cm in diameter), and the relationship between moisture content and electrical resistance, R(R:Electrical resistance)=2E(E:Exponent of 10)+13X(X:Moisture content)-9.705(R²=0.947) was developed. In addition, using this, the software and case of the automated measurement sensor for forest fire surface fuel moisture were designed to produce a prototype, and the suitability (R²=0.824) was confirmed by performing field monitoring verification in the forest. The results of this study would contribute to develop technologies that can predict the occurrence, spread and intensity of forest fires, and are expected to be used as basic data for advanced forest fire risk forecasting technologies.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.4 no.1
• /
• pp.66-80
• /
• 1998

With the opening of healthcare market, the health care environment in Korea is anticipating a drastic change. In this Internationally open market environment, it is necessary to introduce a systematic health care plan and DRG system which offer qualitative medical services as well as reduced cost. Purpose of this study is to develop and test the critical pathway for Cesarean section patient in the way to be possible the integrated inpatient management. It was adopted the process of six phases to develop the critical pathway as the theoretical framework implemented by Johns Hopkins Hospital, Maryland, U.S.A. In the first phase, make a selection of diagnosis/procedures to develop. In the second phase, organize a development team consisted of eight expertises working in maternity nursing area. In the third phase, analyze the overall medical service offered to patient through review medical records and decided the service content and the implementation period for the Cesarean section patient. In the forth phase, make out a preliminary critical pathway after verification of expert group on content validity. In the fifth phase, validity operate to ten Cesarean section patients to test implementation in practice by using the preliminary critical pathway, In the sixth phase, defined the final critical pathway. The result of this study was as follows. 1. There were classified 8 categories as monitoring/assesment, treatment, medication, activity, diet, test, consult, education/discharge plan for vertical axis and showed hospital stayed from admission to discharge for horizontal axis of critical pathway through analysis 68 Cesarean section patients medical records. 2. After critical review 68 medical records to make out a preliminary critical pathway, hospital stays for horizontal axis were showed 6 days, mean hospital stays were 7.5 days, 2.1 days were to be taken operation after admission and 4.2 days were stayed until discharge after operation. 3. After making out a questionare in 90 items of a medical service content of eight categories and verifying the content validity of expertises, the 85 items of the preliminary critical pathway were selected by expertises agreement over 88% and modified or deleted 5 items showing agreement below 75%. 4. After verifying a validity to 10 patients for 4 weeks, hospital stays were 5.9 days. There were deleted 1 item and modified or supplemented the 9 items of the 10 items.

• The Journal of Engineering Geology
• /
• v.27 no.2
• /
• pp.165-172
• /
• 2017

This research aims to define influence factors to perform an optimized section design and evaluate tunnel collapse risk during construction using Delphi technique. A total of five upper classification systems were constructed through literature review, pervious research analysis, and brainstorming of expert group for establishing influence factors. The $1^{st}$, $2^{nd}$, and $3^{rd}$ Delphi survey process was proceeded by panel group which is consisted 21 experts to prevent errors and bias in the expert judgement process. In Delphi $1^{st}$ survey, a total of 22 influence factors candidates were derived through open-ended questionnaire. In Delphi $2^{nd}$ survey, questionnaire was proceeded based on 7-point Likert scale method. In order to verify the validity, CVR (Content Validity Ration) analysis was performed to exclude inappropriate candidates. In the $3^{rd}$ survey, verification of influence factors was proceeded once more with the result of $2^{nd}$ survey, and lastly, a total of 14 influence factors was derived by CVR and COV (Content Validity Ration) analysis for response of experts.