• International Journal of Highway Engineering
• /
• v.11 no.2
• /
• pp.205-216
• /
• 2009

As a subsequent study, this paper presents a comparative evaluation of structural responses in asphalt pavements with stabilized foundations. The approach based on a finite element analysis which incorporates non-linear behaviors of pavement geomaterials is used to estimate each performance indicator under standard single axle loading condition. In addition, results from laboratory tests are used to provide physical and mechanical properties of stabilized geomaterials for analyzing various pavement structures. Changes in pavement responses with varying layer thickness and stabilizer contents were investigated. It is found that the effect of layer thickness and stabilizer content is a critical factor in structural response of stabilized pavements. Moreover, a design criterion is proposed for selecting minimum contents of stabilizer of coarse-grained geomaterials based on a result of unconfined compressive strength and proper layer thickness of foundations.

• KOMUNHWA
• /
• no.66
• /
• pp.87-112
• /
• 2005

Stain removal on ivory has been, for a long time, considered an undesirable treatment in conservation field because ivory is hygroscopic and anisotropic, having different physical properties in different directions. Cyclododecane, which sublimes at room temperature, has been investigated for its use in conservation field since 1995, as a reversible temporary consolidant, sealing agent or coating, water repellent, and barrier layer. This research aims to remove stains on ivory, temporarily protecting the none-stained area or painted area from methanol, acetone or the aqueous cleaning system using cyclododecane as a hydrophobic sealing agent. This research also aims to obtain information regarding whether cyclododecane can be safely and effectively used on archaeological wet ivory. Melted cyclododecane and saturated solutions of cyclododecane in mineral spirits, and hexanes were applied to ivory samples. Application methods, working properties of cyclododecane on ivory, and effect of cyclododecane coating on moisture content of wet ivory were evaluated. The sealing layer formed by molten cyclododecane or by saturated cyclododecane solution in hexane or saturated cyclododecane solution in mineral spirits did not form a secure contact with the surface of the highly polished ivory. The sealing formed with two different layers, in which saturated cyclododecane solution in hexane was applied initially and then molten cyclododecane was applied over the first layer, was found to securely protect the painted area. When the wet samples were kept in 100% RH environments for a month, active mold growths were observed except in the samples sealed with molten cyclododecane. In conclusion, cyclododecane was an efficient hydrophobic sealing agent to protect painting area while cleaning stains on ivory. It also prevented mold growing on wet ivory and wet bone. Evenness of cyclododecane film on ivory will be determined in UV light. Analytical techniques will include visual observation, polarized light microscopy, Scanning Electron Microscope, and Gas Chromatography.

• International Journal of Highway Engineering
• /
• v.7 no.2 s.24
• /
• pp.87-95
• /
• 2005

To prevent the lowering of structural capability due to freezing and thawing in cold winter, numerous researches on frost heaving have been performed. As the result, the freezing index contour map of the Korea peninsula has been made for the design of the anti-freezing layer of pavements. However, the validity of the anti-freezing layer needs to be evaluated because systematic investigations on the variation of freezing depth with the thickness and material types of pavement layers and the configuration of the ground have been rarely performed. The freezing index of the Korea Highway Corporation test road site was calculated and the freezing depths of the concrete and asphalt pavements of the test road were investigated using the ambient and pavement temperature and water content. In addition, the investigated freezing depths were compared to the values estimated by existing freezing depth models. This is the preliminary study on the freezing-related data measured at the test road. The results with higher reliability will be produced by the long-term accumulation of the data and the analysis on it.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.33 no.5 s.112
• /
• pp.83-93
• /
• 2005

Research was initiated to investigate turf performance under USGA soil system. USGA system 45 centimeters deep was built with rootzone layer, intermediate layer, and drainage layer. Six turfgrass entries were comprised of 3 blends and 3 mixtures from cool-season grasses (CSG). Turfgrass color and quality ratings were best in spring and fall, especially early May to early July and late August to early November. Kentucky bluegrass (KB) consistently produced the greatest performance, while perennial ryegrass (PR) the poorest. Intermediate turf performance between KB and PR was observed with tall fescue (TF). Among CSG mixtures it increased with KB but decreased with PR. There were considerable variations in summer turf Performance. No summer drought injury was found in KB and TF. However, PR showed poor performance through summer as compared with others. Among mixtures, it decreased with PR. It was suggested that PR mix in less than $20\%$ in the mixtures to have an acceptable quality in summer. Cultural intensity also affected it. With lowering mowing height, KB of rhizomatous-type in growth habit kept good quality, while PR and TF with bunch-type in growth habit poor quality. Mowing quality was greatly different among CSG. KB produced clean-cut surface, but PR unclean one. If had an intermediate mowing quality between KB and PR. A great difference in green color retention was observed among CSG. The longest CSG was PR that kept green for 339 days, while the shortest one TF for 267 days. KB continued to keep green for 290 days. The mixtures kept green in color for 292 to 315 days, depending on turfgrass mixing intensity. The greater the PR in content, the longer the green color duration. These results demonstrate that KB was the best and PR the worst among CSG grown in USGA system under a domestic climate, in regards of turf quality, color, mowing quality, summer turf performance and green color duration. KB and TF are most adequate for high-maintenance and low-maintenance area, respectively. In case of mixtures for high-quality turf, it was desirable to use KB-based mixture with PR of below $20\%$ in seeding rate.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.104-107
• /
• 2001

In order to investigate the effect of Ge addition to the Cu matrix on the microstructure and the critical current density, four kinds of internal tin processed Nb$_3$Sn strands with pure Cu and Cu 0.2, 0.4, 0.6 wt % Ge alloys were drawn to 0.8 mm diameter. The microstructure and critical current of internal tin processed Nb$_3$Sn wires that were heat treated at temperatures ranging from 68$0^{\circ}C$ to 74$0^{\circ}C$ for 240h were investigated. The Ge addition to the matrix did not make workability worse. A Ge rich layer in the Cu-Ge matrix suppressed the growth of the Nb$_3$Sn layer and promoted grain coarsening. The greater the Ge content in the matrix, the lower the net Jc result after Nb$_3$sn reaction heat treatment. There was no significant variation in Jc observed with heat treatment temperature ranging from 68$0^{\circ}C$ to 74$0^{\circ}C$. The values of AC loss of Ge added wires were decreased to 40 % compare with no addition wire. Low AC loss was due to segregation of Ge rich layer in the Cu-Ge matrix. If Ge added wire with thin Nb filaments were fabricated, slow diffusion rate of Sn would be overcome and decreased AC loss that is weak Point of internal tin method.

• 보존과학연구
• /
• s.29
• /
• pp.65-90
• /
• 2008

This study examines the status and the physical features of Paraloid B-72 layers with examination of microstructure and analysis of organic matters. Paraloid B-72 layers were coated on samples from the colour layer of outer wall painting in Mireuk hall in Geumsan temple. On the basis of the previous examination result, it has made the samples which are similar to outer wall in Mireuk hall in Geumsan temple. The samples can be divided into two, one; 5% Paraloid B-72 coating and another is without coating. Then samples have been experimented under the compulsive environments of infrared radiation and immersion, thereafter compared the results of the damages and physical features between two samples. As a result of the comparison, the sample with Paraloid B-72 had more serious cracks, exfoliations and peeling layers than that of without Paraloid B-72. Otherwise, in the examination of ultraviolet radiation, the sample with Paraloid B-72 coating showed weaker physical properties, less density in structure of colour layer and less hardness in surface of colour layer than the sample without coating. The percentage of moisture content after the ultraviolet radiation was higher in the sample without Paraloid B-72 than the sample with Paraloid B-72 coating. Observing the conditions before the ultraviolet radiation, the sample with Paraloid B-72 coating demonstrated lower rate in moisture evaporation rate than the sample without Paraloid B-72. As a consequence, in examination of this samples, the change of physical features are increased in the sample with Paraloid B-72 coating than that without Paraloid B-72 when compulsive environment of heat, moisture and ultraviolet rays for a short term are imposed.

• Korean Journal of Medicinal Crop Science
• /
• v.20 no.3
• /
• pp.159-164
• /
• 2012

In this study, we investigated the antibacterial activity, antioxidative activity and whitening effect of 75% ethanol extracts from different parts of Prunus sargentii. The total phenolic compound content of the branch extract was 277.92 mg/g as the highest level. In the measurement of DPPH radical scavenging ability, $SC_{50}$ values of the cork layer and branch extract were 26.79 ${\mu}g/m{\ell}$ and 30.13 ${\mu}g/m{\ell}$. In nitric oxide (NO) scavenging ability, $SC_{50}$ values of the branch and leaf extract were 49.19 ${\mu}g/m{\ell}$ and 55.55 ${\mu}g/m{\ell}$. All extracts exhibited higher NO scavenging ability than ascorbic acid used as positive control. On the other hand, in antibacterial activity against Staphylococcus epidermidis and Staphylococcus aureus by disc diffusion assay, the pure bark extract showed the highest activity. Moreover, tyrosinase inhibitory activity of cork layer, pure bark and branch extracts showed higher activity than arbutin used as positive control. In the cytotoxicity measurement by MTT assay, leaf extract was exhibited Raw 264.7 cell viabilities of 44.68~61.83% as cytotoxic result in tested concentration. In conclusion, the branch extract of Prunus sargentii will be a functional materials without damage compared to other parts such as pure bark or cork layer in the plant.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.3 no.3
• /
• pp.189-196
• /
• 1999

The community structure, phytomass, and primary productivity in Thuja orientalis stands on a limestone area located in Maepo-up, Chungbuk province in Korea were estimated quantitatively. Seven species including a small proportion of Quercus dentata were identified in the tree layer, 26 species including Ulmus macrocarpa in the shrub layer, and 79 species including Carex lnceolata in the herb layer of the Thuja stands. The vertical distribution of the fine root phytomass exhibited a power functional decrease relative to the soil depth. The seasonal changes in the fine root phytomass at a soil depth of 5 cm were closely related to the pecipitation in the study area. The productivity of the stand of stems, branches, leaves, and roots were 10.72, 0.82, 0.45 and 6.46 ton DM. $ha^{-1}$ .$yr^{-1}$, respectively. The Thuja stand had a high foliage(25%) and low rate of production per unit of foliage. The annual turnover rate of the fine roots int he Thuja stand was 6.71 $yr^{-1}$. The net primary production of the overstory including the understory was estimated at 19.48 ton DM.$ha^{-1}$.$yr^{-1}$ including an underground section of 6.46 ton DM.$ha^{-1}$.$yr^{-1}$(33%). The allocation ratio of net production to root was lower in the limestone Thuja communities than at the nearby non-limestone ones, whereas the production efficiency to leaf weight was higher in the limestone communities. These results would seem to indicate that the limited production capacity is due to the calcium toxicity and low availability of iron and phosphorus in a limestone soil with a high pH, calcium, and bicarbonate content with a strategy for survival in a hostile habitat.

• Journal of the Korea Convergence Society
• /
• v.8 no.11
• /
• pp.307-312
• /
• 2017

In the industry, galvanizing using the principle of sacrificial anode is used Zn-Ni alloy plating was developed as one of the measures to increase the corrosion resistance rather than pure zinc plating. The alloy plating layer has a corrosion resistance of 4-5 times that of the pure zinc plating layer, so that it is applied to automotive parts requiring high corrosion resistance even though the plating cost is high. The amount of Zn-Ni alloy plating solution is a sulfuric acid bath, a chlorinated bath, an alkali bath, and an ammonia bath. Here, the influence of the electrolytic conditions on the composition of the alloy plating in the chloride bath was investigated. The results are explained by the cathode overvoltage and the diffusion coefficient. In general, as the overvoltage of the cathode increases, the concentration polarization becomes more important than the activation polarization. The concentration polarization is determined by element diffusion in the diffusion layer. That is, as the overvoltage of the cathode increases, the Zn content having a large diffusion coefficient increases.

• Journal of Ecology and Environment
• /
• v.33 no.2
• /
• pp.175-186
• /
• 2010

This study was designed to evaluate changes in the terpene composition of 3 types of pines (Pinus densiflora, Pinus thunbergii and Pinus rigida), while decomposing their leaf litter. Needle litters were placed at two different organic layer depths, one on the surface and the other beneath the litter layer. Changes in the terpene composition of this litter were detected using a gas chromatograph-mass spectrometer. Among the monoterpenes acquired from the fresh needles of P. densiflora and P. rigida, $\alpha$-pinene (12.05% and 19.87%, respectively) was the major one, followed by $\beta$-pinene (2.90% and 14.07%). However, from the needles of P. thunbergii, $\beta$-pinene (20.77%) was the major one, followed by $\alpha$-pinene (10.79%). Among the sesquiterpenes detected in P. densiflora, trans-caryophyllene (3.12%) was the highest composition compound, whereas germacrene-D (6.09%) for P. thunbergii and 1,6-cyclodecadiene (7.41%) and endo-1-bourbonanol (7.41%) for P. rigida were the highest content compounds. However, the total amounts of terpenes decreased sharply by 40-85.4% in all three types of pine needle after 90-120 days of the experiment. The concentration of each terpene differed during decomposition, and the majority of compounds disappeared from beneath the litter layer. It was determined that three types of reducing patterns of each compound appeared on the rate of loss of concentration during decomposition; one pattern decreasing sharply during the initial period, another pattern steadily or slowly decreasing, and a newly detected pattern at low concentration occurring during decomposition.