• Journal of The Korean Association of Information Education
• /
• v.24 no.2
• /
• pp.157-165
• /
• 2020

As interest in software education has increased, discussions on teaching, learning, and evaluation method it have also been active. One of the problems of software education teaching method is that the instructor cannot grasp the content of coding in progress in the learner's computer in real time, and therefore, instructors are limited in providing feedback to learners in a timely manner. To overcome this problem, in this study, we developed a software education support system that grasps the real-time learner coding situation under block-based programming environment by applying a learning analysis technique and delivers it to the instructor, and visualizes the data collected during learning through the Hadoop system. The system includes a presentation layer to which teachers and learners access, a business layer to analyze and structure code, and a DB layer to store class information, account information, and learning information. The instructor can set the content to be learned in advance in the software education support system, and compare and analyze the learner's achievement through the computational thinking components rubric, based on the data comparing the stored code with the students' code.

• The Korean Journal of Ecology
• /
• v.27 no.5
• /
• pp.291-300
• /
• 2004

This study was carried out to investigate the relationship of occurrence and distribution of Eupatorium rugosum by forest types and soil characteristics in Mt. Namsan in Seoul, Korea. E. rugosum is designated as a harmful non-indigenous plant in ecosystem by the Natural Environment Conservation Act in Korea. E. rugosum grew along roadside and in valleys with some favorable light conditions. E. rugosum occurred in aggregations under Pinus densiflora and Robinia pseudoacacia communities. And it was sparse in forests of Quercus mongolica and P. koraiensis. The representative herb layer species were Oplismenus undulatifolius, and Parthenocissus tricuspidata in the E. rugosum communities. There was a significantly negative correlation between the coverage of E. rugosum and the coverage of tree layer. However, the result of ANOVA of E. rugosum coverage by dominant species of tree layers did not show a significant difference (p>0.05). The level of soil moisture content, organic content, and pH, was slightly higher in communities with E. rugosum than without, but it was statistically non-significant difference. However, it was found that the coverage of E. rugosum was very significantly negative correlated with the depth of top soil profile (litter and fermentation layer, p<0.05).

• Journal of Yeungnam Medical Science
• /
• v.1 no.1
• /
• pp.59-66
• /
• 1984

Although it is well established that steroid is effective for treatment of neonatal respiratory distress syndrome (NRDS), the action mechanism of steroid on NRDS is not well known. Several authors have insisted that steroid increases secretion of pulmonary surfactant from type II pneumocyte, but others have insisted that steroid does not affect the secretory function of the type II pneumocyte. And some authors have suggested that steroid may ca use compositional change of pulmonary surfactant phospholipid. From these aspects, it is desirable to confirm the effect of steroid on (he secretory function of the type II pneumocyte. In order to know the effect of steroid on pulmonary surfactant activity, phospholipid phosphorus of lung lavage was measured and composition of pulmonary surfactant phospholipid of lung lavage was analyzed by thin layer chromatography (TLC) in control (C), pneumonectomized (PN), and pneumonectomized with betamethasone treated (PNS) rabbits. And lung weight and lung weight-body weight ratio were measured in each experimental group also. In PN group, right lung pneumonectomy was performed under general anesthesia with pentobarbital sodium (30mg/kg). On the fifth day after the surgery, the left lung was excised and measured above parameters. In PNS group, pneumonectomy was performed as PN group, and one day after the surgery, betamethasone was injected for four days intramusculary (4mg/day) and rabbits were sacrificed. The experiment yielded following results. PNS group's lung weight was significantly (p<0.01) heavier than C group's, but in comparison with PN group's it showed no significant change. PNS group's L/B ratio was significantly (p<0.05) higher than C group's, but compared with PN group's it showed no significant change. The value of phospholipid phosphorus content of PNS group was significantly (p<0.01) higher than that of C group. Even if the value of phospholipid phosphorus content in PNS group was not significantly higher than that of PN group, it showed increasing tendency compared with that of PN group. And in an analysis of the thin layer chromatogram, quantity (${\mu}mol/gm$ of wet weight lung) of phosphatidylcholine in PNS group decreased significantly (p<0.05) compared with C and PN group. From these results, it may be suggested that though steroid inhibits cellular hyperplasia in the compensatory growing lung, it auguments the secretory function of type II pneumocyte and causes compositional change of pulmonary surfactant phospholipid.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.3
• /
• pp.362-369
• /
• 1996

Seven different drying methods were tested in peony roots of Euisung cultivar, harvested in February, in three year's old plant. The roots were selected in length and diameter and half of the samples were removed cork-layers to compare the effects of cork-layer in processing of drying. The 3$0^{\circ}C$ heat drying without cork-layer reduced in days to drying by five days compared to those of the with cork-layers at the same temperature. The 5$0^{\circ}C$ heat drying after cork-layers removed was the most effective in days to drying. In quality of skin color of the 5$0^{\circ}C$ heating was worse to compare with the lower drying temperature. In the drying at room temperature and the heat drying at lower temperature, the paeoniflorin content in drying after cork-layers removed were higher than that of the drying with cork-layers. However, in the boiling water treatment, the paeoniflorin contents in drying after cork-layers removed were lower than those of with cork-layers. In heat drying, paeoniflorin content showed a decreasing tendency to increase of drying temperature. Total sugars in the peony roots showed a decreasing tendency according to the drying temperature increasing, but starch concentration showed a increasing tendency at the same condition. Concentrations of crude protein, crude fiber and crude ash were showed no differences in various drying methods and the materials with or without cork-layers. Relationships between the paeoniflorin and total sugars, and the paeoniflorin and starch were different significantly by the materials of cork-layers removed or not. The 30~4$0^{\circ}C$ heat drying without cork-layers was the most advisable condition for drying in paeoniflorin concentration, days to drying and skin color after drying.

• Journal of Ecology and Environment
• /
• v.41 no.10
• /
• pp.290-301
• /
• 2017

Background: Forest edges create distinctive ecological space as adjacent constituents, which distinguish between different ecosystems or land use types. These edges are made by anthropogenic or natural disturbance and affects both abiotic and biotic factors gradually. This study was carried out to assess edge effects on disturbed landscape at the pine-dominated clear-cut area in a genetic resources reserve in Uljin-gun, eastern Korea. This study aims to estimate the distance of edge influence by analyzing changes of abiotic and biotic factors along the distance from forest edge. Further, we recommend forest management strategy for sustaining healthy forest landscapes by reducing effects of deforestation. Results: Distance of edge effect based on the abiotic factors varied from 8.2 to 33.0 m. The distances were the longest in $Mg^{2+}$ content and total nitrogen, $K^+$, $Ca^{2+}$ contents, canopy openness, light intensity, air humidity, $Na^+$ content, and soil temperature followed. The result based on biotic factors varied from 6.8 to 29.5 m, coverage of tree species in the herb layer showed the longest distance and coverage of shrub plant in the herb layer, evenness, species diversity, total coverage of herb layer, and species richness followed. As the result of calculation of edge effect by synthesizing 26 factors measured in this study, the effect was shown from 11.0 m of the forest interior to 22.4 m of the open space. In the result of stand ordination, Rhododendron mucronulatum, R. schlippenbachii, and Fraxinus sieboldiana dominated arrangement of forest interior sites and Quercus mongolica, Vitis amurensis, and Rubus crataegifolius dominated spatial distribution of the open area plots. Conclusions: Forest interior habitat lies within the influence of both abiotic and biotic edge effects. Therefore, we need a forest management strategy to sustain the stability of the plant and further animal communities that depend on its stable conditions. For protecting forest interior, we recommend selective logging as a harvesting method for minimizing edge effects by anthropogenic disturbance. In fact, it was known that selective logging contributes to control light availability and wind regime, which are key factors affecting microclimate. In addition, ecological restoration applying protective planting for the remaining forest in the clear-cut area could contribute to prevent continuous disturbance in forest interior.

• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.3
• /
• pp.19-24
• /
• 2009

Formation of an adhesion/barrier layer and a seed layer by sputtering techniques followed by electroplating has been one of the most widely used methods for the filling of through-Si via (TSV) with high aspect ratio for 3-D packaging. In this research, the adhesion and diffusion-barrier properties of the $TaN_x$ film deposited by reactive sputtering were investigated. The adhesion strength between Cu film and $SiO_2$/Si substrate was quantitatively measured by $180^{\circ}$ peel test and topple test as a function of the composition of the adhesive $TaN_x$ film. As the nitrogen content increased in the adhesive $TaN_x$ film, the adhesion strength between Cu and $SiO_2$/Si substrate increased, which was attributed to the increased formation of interfacial compound layer with the nitrogen flow rate. We also examined the diffusion-barrier properties of the $TaN_x$ films against Cu diffusion and found that it was improved with increasing nitrogen content in the $TaN_x$ film up to N/Ta ratio of 1.4.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.6
• /
• pp.823-827
• /
• 2010

This study was conducted to assess the propriety of models for soil water characteristics estimation in anthropogenic soil through the measurement of soil water content and soil water matric potential. Soil profile was characterized with four different soil layers. Soil texture was loamy sand for the first soil layer (from soil surface to 30 cm soil depth), sand for the second (30~70 cm soil depth) and the third soil layers (70~120 cm soil depth), and sandy loam for the fourth soil layer (120 cm < soil depth). Soil water retention curve (SWRC), the relation between soil water content and soil water matric potential, took a similar trend between different layers except the layer of below 120 cm soil depth. The estimation of SWRC and air entry value was better in van Genuchten model by analytical method than in Brooks-Corey model with power function. Therefore, it could be concluded that van Genuchten model is more desirable than Brook-Corey model for estimating soil water characteristics of anthropogenic soil accumulated with saprolite.

• Korean Chemical Engineering Research
• /
• v.57 no.4
• /
• pp.512-518
• /
• 2019

To develop a membrane electrode assembly (MEA) with lower Pt loading and higher performance in proton exchange membrane fuel cells (PEMFCs), it is an important research issue to understand interfacial structure of Pt/C catalyst and ionomer and design the catalyst layer structure. In this study, we prepared short-side-chain Nafion-based ionomer dispersion using propylene glycol (PG) as a solvent instead of water which is commonly used as a solvent for commercially available ionomers. Cathode catalyst layers with different ionomer content from 20 to 35 wt% were prepared using the ionomer dispersion for the fabrication of four different MEAs, and their fuel cell performance was evaluated. As the ionomer content increased to 35 wt%, the performance of the prepared MEAs increased proportionally, unlike the commercially available water-based ionomer, which exhibited an optimum at about 25 wt%. Small size micelles and slow evaporation of PG in the ionomer dispersion were effective in proton transfer by inducing the formation of a uniformly structured catalyst layer, but the low oxygen permeability problem of the PG-based ionomer film should be resolved to improve the MEA performance.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.32 no.4
• /
• pp.128-135
• /
• 2022

The inside of a quartz glass crucible for semiconductor processing, called a transparent layer, is manufactured using synthetic silica powder. Bubbles existing in the transparent layer of the crucible cause a problem of reducing the quality of the crucible as well as the yield of the silicon ingot. Therefore, the main goal of the synthetic silica powder, which is the raw material of the transparent layer, is to minimize the bubble generation factor. For this purpose, in the case of synthetic silica powder, it is necessary to minimize silanol groups, carbon and pores. In this study, synthetic silica gel was prepared using the sol-gel method, and changes in carbon content and specific surface area were investigated according to calcination temperature and dwelled time in a two-stage calcination process. The first-stage calcination process was performed between 500℃ and 600℃ and the second-stage calcination process was performed between 1000℃ and 1100℃. The dwelled time was carried out from 10 minutes to a maximum of 12 hours. The carbon content of the powder calcined at 1000℃ for 1 hour was 0.0031 wt.%, and the specific surface area of the powder calcined at 1100℃ for 12 hours was 16.6 m²/g.

• Structural Engineering and Mechanics
• /
• v.58 no.3
• /
• pp.515-532
• /
• 2016

The elastoplastic response of functionally graded material (FGM) beams resting on a nonlinear elastic foundation to an eccentric axial load is investigated by using the finite element method. The FGM is assumed to be formed from ceramic and metal phases with their volume fraction vary in the thickness direction by a power-law function. A bilinear elastoplastic behavior is assumed for the metallic phase, and the effective elastoplastic properties of the FGM are evaluated by Tamura-Tomota-Ozawa (TTO) model. Based on the classical beam theory, a nonlinear finite beam element taking the shift in the neutral axis position into account is formulated and employed in the investigation. An incremental-iterative procedure in combination with the arc-length control method is employed in computing the equilibrium paths of the beams. The validation of the formulated element is confirmed by comparing the equilibrium paths obtained by using the present element and the one available in the literature. The numerical results show that the elastoplastic post-buckling of the FGM beams is unstable, and the post-buckling strength is higher for the beams associated with a higher ceramic content. Different from homogeneous beams, yielding in the FGM beam occurs in the layer near the ceramic layer before in the layer near metal surface. A parametric study is carried out to highlight the effect of the material distribution, foundation support and eccentric ratio on the elastoplastic response of the beams.