• Korean Journal of Food Science and Technology
• /
• v.26 no.3
• /
• pp.310-316
• /
• 1994

The phenolic substances contents of 45 plant foods in Korean diet were determined by different methods. Total phenolics contents by Folin-Denis method were $0.1{\sim}5.8%$ (dry matter basis), in which persimmon leaf, chestnut's inner skin, Chinese quince, walnut, sunflower seed and arrowroot exhibited the higher levels above 2%. Condensed tannin contents by vanillin method were $0{\sim}48%$, in which Chinese quince and chestnut's inner layer gave very high levels. Protein-precipitable phenolic substances ranged from 0.4% to 2.2%, in which chestnut's inner layer, walnut and Chinese quince had the highest content. The ability of phenolics to form precipitate was higher with pepsin and albumin than with trypsin. Among different phenolics content, total phenlolics correlated significantly with protein-precipitable phenolics (r=0.65) and condensed tannin (r=0.56). Chinese quince, chestnut's inner skin and sorghum showed a relatively lower degree of polymerization, as expressed by vanillin/FolinDenis ratio. Processed foods from buckwheat, acorn, mugwort and arrowroot showed a lower content of phenolic substances, suggesting a negligible adverse effect on the bioavailability of food proteins, if any.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.5
• /
• pp.722-726
• /
• 2011

The management standard on soil conditions in 'Fuji' apple to produce high quality fruit were not yet made. Therefore, this study was carried out to investigate the optimum soil environmental conditions of ten contents on production of high quality fruit in 'Fuji' apple. The soil and fruit characteristics were analyzed at total 60 orchards in major apple producing areas such as Chungju, Moonkyeung, yeongju, andong, yeosan and yeongcheon (10 orchards an area). The soil environmental factors affected fruit weight was highest relative contribution in saturated hydraulic conductivity of 36.5%. The bulk density and soil pH were low as relative contribution. The fruit weight was influenced by soil physical properties more than soil chemical properties. The soil environmental factors affected sugar content were hydraulic conductivity of 28.3% and organic matter content of 18.2%. The cultivation layer depth and soil pH were low as relative contribution. The fruit coloring was highest relative contribution in saturated hydraulic conductivity 55.9%. while soil pH, cation and soil texture were low. Fruit coloring was high influenced over 70% by soil physical properties. Finally, relative contribution on fruit quality related with sugar content, fruit weight, and coloring were high influenced by saturated hydraulic conductivity of 21.% and organic matter content of 18.7% but bulk density and cultivation layer depth were low relative contribution. The fruit growth and saturated hydraulic conductivity in 'Fuji' apple were very closely related. Therefore, orchard soil management to produce high quality fruit was very importance drainage management and organic matter application. We concluded that scientific soil management is possible by qualifiable of soil management factors.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.6 no.1
• /
• pp.13-26
• /
• 2001

Six ferromanganese crusts from the Lomilik and Litatfooki seamounts in the Marshall Islands were analyzed for texture, geochemistry and stratigraphy to delineate the paleoceanographic conditions. The crusts can be divided into three layers; 1) outermost massive layer (Layer 1), 2) middle porous Fe-oxides rich layer infllled with biointemal clasts (Layer 2), and 3) innermost massive layer cemented and/or replaced by carbonate fluoapatite (CFA) (Layer 3). The Layer 1 contains higher Mn, Co, Ni, and Mg than other two layers, and the Layer 2 was relatively more enriched in Fe, Al, Ti, Ba, Cu, and Zn. However, the Layer 3 shows higher Ca and P and lower Mn, Fe, Co, and Ni contents than overlying two layers. Based on the Co-chronometry, the crusts are postulated to have begun to grow from 56-31 Ma (early Eocene to Oligocene). The boundaries between layers 1 and 2, and layers 2 and 3 are dated to be 7-3 Ma and 26-14 Ma, respectively. High contents of Ca and P in Layer 3 clearly indicate that the layer had been phosphatized prior to the formation of Layer 2. Considering the well-preserved mjcrostructures in Layer 3, it is unlike that the crusts themselves were recrystallized in suboxic condition. Also, the lower Co concentrations in Layer 3 may imply that the Co supply was not constant during the formation of Layer 3. Layer 2, characterized by the porous texture, grew over Layer 3 during 26-9 Ma. Internal biogenic sediments including foraminifera within the original cavities and the enrichment of organophillic elements such as Ba, Cu, and Zn, suggest that Layer 2 have below high production regions. Also, high content of allumino silicate components may indicate increased terrigeneous input during the formation of Layer 2. The Layer 2. The Layer 1 has been subjected to little diagenetic influence since the Pliocene.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.1
• /
• pp.75-84
• /
• 2016

Thermal performance of wooden houses used by building materials effectively contributing to building energy saving has been improved. However, the performance was decreased to the condensation and mould growth from exterior wall because the moisture control was difficult to high insulation and airtightness. Therefore, the hygrothermal performance of exterior wall, that selected 5 types of wooden houses, evaluated using the hygrothermal simulation program: heat and moisture behavior, condensation and mould growth risk. Wooden houses were selected Rural houses standard plans '10 and '14, $2^{{\prime}{\prime}}{\times}6^{{\prime}{\prime}}$ type, EIFS and wood-based passive house. And the wall A, B, C, D and E were determined by layer component of each wall. The U-value of exterior wall are 0.171, 0.172, 0.221, 0.150, $0.079W/m^2K$. The OSB absolute water content of the wall A and C was exceeds the reference value of 20%, and it was confirmed that condensation occur at insulation material inner surface through the condensation evaluation in the winter. The wall D and E showed excellent results with condensation and water content evaluation compared to others. However, mould growth risk assessment in all five types of wall had have risk. We were determined that hygrothermal performance difference of exterior wall occur the difference in the layer structure rather than in thermal performance.

• Polymer(Korea)
• /
• v.24 no.2
• /
• pp.268-275
• /
• 2000

We investigated the effect of polymer sublayer on volumetric resistivity and tensile strength of carbon fiber (CF)/polyethylene composite films fabricated under high intensity electric fields. The dependence of volumetric resistivity and tensile strength of the films on the polymer sublayer thickness or mass part exhibited complex behavior according to CF content and CF layer density in the films. As the thickness of polymer sublayer increases, two groups of processes at thermo-mechanical forming stage would take effects in the properties of the films. The first group comprises the increase of polymer layer thickness having reduced CF content compared with central or upper part of the film and insufficient wetting of CF resulting in the loosened structure near upper film side. The second group, on the other hand, is the improvement of mobility of molten sublayer leading to better distribution of CF throughout the film thickness and the formation of more compact structure. The different degree of contribution of these two competing processes at varied CF content and CF layer density could explain complex dependence of the film properties on the polymer sublayer. These results are important to optimize the electrical and mechanical properties of highly conductive polymer films, which can be used as electromagnetic interference shielding materials.

• Journal of Life Science
• /
• v.30 no.10
• /
• pp.860-866
• /
• 2020

This study examined the characteristics of eggs obtained from layer chickens reared with feed that included Tenebrio molitor larvae, which were in turn bred using feed that included dried food waste powder. The eggs showed a tendency to be slightly thinner in the treated groups, but the Haugh unit indicating freshness was higher in the treated groups than the control group, and the 5% larval-treated group showed the highest value. The color of the yolk tended toward higher redness, lower brightness, and lower yellowness in the 5%-treated group, which also showed similar crude fat and protein values to the control group; the 10%- and 15% larval-treated groups had lower crude fat and protein values, although the carbohydrate content was higher. Structural amino acids in the treated groups showed a higher ratio of non-essential amino acids to essential amino acids than the control. The polyphenol content, which is an index of antioxidants, was highest in the 5%-treated group, and it is thought that this may affect the storage and antioxidant properties of the eggs. Thus, when employed with a feed source to maintain high protein and high fat, T. molitor larvae may cause critical changes in the nutrient content of eggs and improve their freshness.

• Journal of Conservation Science
• /
• v.26 no.2
• /
• pp.109-120
• /
• 2010

Four gilded bronze objects and a gilded silver object were examined for elemental diffusion between the gilding layer and the mating matrix. The gilded bronzes consist of three objects from three different historical periods, the Korean Three Kingdoms period, the Koryo and the Choseon periods and one from an unknown period. The gilded silver was from the Koryo period. The amalgam process seems to have been the major technique employed for all of them in gilding. The occurrence of substantial diffusion was observed in all but the anonymous object, particularly in the Choseon artifact where evidence was found that the diffusion phenomenon was intentionally utilized in gilding. The gold content in the gilded bronzes decreases gradually from surface to interior while the copper content increases to the interior, making it difficult to locate the boundary between the gilding layer and the matrix. This gradual change in composition must have resulted from elemental diffusion at elevated temperatures. The oxygen content negligible in the gilding layer precludes the possibility of corrosion being responsible for the varying composition. It is observed that non-uniform diffusion caused variation of colors in the surface of gilded bronzes. The change of colors induced by diffusion, which is always accompanied by the unique surface morphology and chemical compositions, is distinguished from the color change by corrosion. In the gilded silver object, diffusion of mercury was observed along with that of gold and silver.

• Korean Journal of Materials Research
• /
• v.30 no.7
• /
• pp.359-368
• /
• 2020

This study is aimed at improving the plasma resistance of Al₂O₃ ceramics on which plasma resistant YAS(Y₂O₃-Al₂O₃-SiO₂) frit is melt-coated using a simple heat-treatment process. For this purpose, the results of phase analysis and microstructural observations of the prepared YAS frits and the coating layers on the Al₂O₃ ceramics according to the batch compositions are compared and discussed with regard to the results of plasma resistance test. The prepared YAS frits consist of crystalline or amorphous or co-existing crystalline and amorphous phases according to the batch compositions, depending on the role and content of each raw material. The prepared YAS frit is melt-coated on the densely sintered Al₂O₃ ceramics, resulting in a dense coating layer with a thickness of at least ~ 80 ㎛. The YAS coating layer consists of crystalline YAG(Y₃Al₅O₁₂), Y₂Si₂O₇, and Al₂O₃ phases, and YAS glass phase. Plasma resistance of YAS coated Al₂O₃ ceramics is strongly dependent on the content of the YAG(Y₃Al₅O₁₂) and Y₂Si₂O₇ crystalline phases in the coating layer, especially on the content of the YAG phase. Comparing the weight loss of YAS coating ceramics with values obtained for commercial Y₂O₃, Al₂O₃, and quartz ceramics, the plasma resistance of the YAS coating ceramics is 6 times higher than that of quartz, 2 times higher than that of Al₂O₃, and 50 % of the resistance of Y₂O₃.

• Korean Journal of Plant Resources
• /
• v.23 no.2
• /
• pp.179-186
• /
• 2010

This study was conducted to provide basic information for conservation and restoration through investigation of vegetation and soil condition of Megaleranthis saniculifolia Ohwi, Korean endemic species, in Mt. Halla, Jeju Island. Very few individuals were discontinuously distributed and restricted at 1,075 m above sea level, very steep slope ($60-70^{\circ}C$), rocky area of north face of Eorimok Valley. For investigation of environmental condition, we established two $10\;{\times}\;10\;m$ quadrats in the habitats and one control quadrat. Twenty-four species were found at site 1 under 10-12 m Carpinus laxiflora tree layer (35%) and soil conditions are pH 5.9, moisture content (field capacity) 9.39%, organic carbon 8.22% and organic matter 14.17%, respectively. Site2, 15 taxa were found under 8-12 m Platycarya strobilacea tree layer (40%) and soil conditions are pH 5.07, moisture content 4.99%, organic carbon 5.34% and 9.21 percentage of organic matter. In the control quadrat, 14 taxa were found under 10 m Carpinus laxiflora tree layer (10%) and soil conditions are pH 5.27, moisture content 6.23%, organic carbon 4.74% and organic matter 8.17%, respectively. The principal causes of threat which were investigated in this study are competition among company, very steep slopes, artificial management of valley. For restoration and conservation of habitats, it is needed to suitable plans.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.12
• /
• pp.5-12
• /
• 2013

In this study, weathered granite model tests were performed to investigate the variation of volumetric water content and matric suction by the adsorption and desorption processes of artificial rainfall. It has been compared with numerical analysis in unsaturated condition. As the results, the behaviors of volumetric water content and matric suction were distinguished by the seepage distance separated into higher, middle and lower area, and the drainage layer located at the bottom of the experimental device. In the adsorption process, the instantaneously large change of matric suction and water content were related to the increase of permeability in soil. However, in the desorption process, the change of matric suction and water content were gradually small because of the decrease of permeability. The volumetric water content and matric suction showed the difference according to the seepage distance, however the typical characteristic curves were made by the adsorption and desorption processes.