• Journal of the Korean Geosynthetics Society
• /
• v.22 no.3
• /
• pp.37-46
• /
• 2023

In this paper, the physical properties, stress deformation and strength characteristics, density and permeability characteristics of silty sand (SM) by fines content were analyzed through indoor tests. also based on the results of the indoor tests, a compact analysis was performed according to the content of SM, and the applicability of SM ground to the compacted target layer was evaluated by comparing it with the measurement data of the actual problem site. As a result of indoor tests and compression analysis, SM changed its mechanical properties from sandy soil to viscous soil when the fine particle content was 35% or higher, and using field measurement data, SM was found to have a higher compression tendency than direct subsidence. Therefore, the mechanical characteristics of SM above Fc 35% are considered to be similar to that of viscous soil, which is different from the compression characteristics of the tendency of immediate subsidence to conventional sandy soil, so it is necessary to present the mechanical characteristics of SM through further research. The research findings highlight the importance of considering consolidation settlement in silty sand (SM) when evaluating soft soil conditions. These findings can aid in revising criteria for assessing weak ground conditions by providing essential engineering property data based on varying fines content in silty sand.

• Journal of Conservation Science
• /
• v.37 no.6
• /
• pp.748-766
• /
• 2021

The Iksan Ssangneung (twin tombs), a pair of tombs comprising the Daewangneung (large royal tomb) and the Sowangneung (small royal tomb), were constructed in the typical style of stone tunnel and chamber tombs in the Baekje Kingdom during the Sabi period (538 to 660 AD) of ancient Korea. Soil layers exposed during excavation of Sowangneung in a trench east of the tomb are: the bottommost layer, the ground level layer, the Panchuk (rammed earth) layer of the Baekje, the layer created by a grave robbery, and soil recovered during the Japanese colonial period. Soil samples were obtained by segmenting an easy stratigraphic horizon into sub categorized soil layers, and their material properties were analyzed; they are composed mainly of sandy loam based on the particle size distributions. In the site foundation, loamy sand is packed in the bottommost layer, and sandy loam with high sand and silty sand fills most of the overlying layer. The central and topmost portion of the Baekje layer is composed of loam with high clay content. All soil layers show geochemical behaviors similar to those of the bottommost layer. X-ray diffraction analysis verified kaolinite in all layers, also observed in soil layers displaying high crystallinity. Kaolinite and halloysite were identified by scanning electron microscopy. Thus, we conclude that the Baekje layer of the Sowangneung is composed of sandy loam containing kaolin procured from near the site. An impermeable middle to upper layer was created using viscous loam. The top of the tomb was closed tightly.

• The Journal of the Korea Contents Association
• /
• v.9 no.1
• /
• pp.30-44
• /
• 2009

In this paper, we propose the mobile P2P structure supporting content searches for mobile peers efficiently. The proposed mobile P2P structure is a 3-tier structure which consists of a mobile peer, a mobile super peer, and a stationary super peer to reduce the content search cost of mobile P2P service. For content searches, mobile peer searches content in the communication range and performs hierarchical content searches which is using mobile super peer, stationary super peer for expansion of query region. In order to support hierarchial content searches and the continuity of services according to peer mobilities, peer's join/leave processes are explicitly stored by supporting message structures to the upper layer It is shown through experimental evaluation that the proposed structure improves about 32% contents search performance over the existing 2-tier structure. Since it also reduces the messages transferred to the stationary super peers, it reduced about 25% search loads of them.

• Journal of Environmental Science International
• /
• v.12 no.2
• /
• pp.111-117
• /
• 2003

This paper investigates preliminarily spatial distribution soil organic matter (SOM), nitrogen (N) and phosphorus (P) and its environmental influence in wetland soil of different vegetation landscape in the Yellow River Mouth. The result shows the SOM and total nitrogen (TN), efficient N, efficient P in top layer soils of different vegetation district have significantly different content, The SOM is shown as Calamagrostis epigeios wetlands > Phragmites cmmunis wetlands > Tamarix chinensi wetlands above tidal > Suaeda salsa wetlands in high tidal > Tamarix chinensi wetlands in high tidal > tidal flats, the arrange of the TN and efficient N content is the same except that the content in Suaeda salsa wetlands in high tidal is heavier than Tamarix chinensi wetlands in high tidal. In different vegetation landscape wetland types the vertical change of soil nutrients are obvious except for p, gradually decrease from the upper to the lower. This case reflects the function of the vegetation on the wetland development of soil and proves the wetland soil has the characteristic of new born and bad degree of development. SOM, TN, efficient N and efficient P content in wetland soils have significantly positive correlation, but TP have no correlation with them but efficient p. The contents of TN in wetland soils range from 58~1480 mg/kg, total average content 408 mg/kg, average content of above 30 cm is 625 mg/kg. The range of TP content in the soil is 372~1042 mg/kg, total average is 569 mg/kg, average content of above 20 cm is 611 mg/kg. According the P it occurs mainly as calcium phosphates, and the validity is lower, therefore, N and P in the new born wetlands cannot produce serious impact on the environments at present.

• Current Research on Agriculture and Life Sciences
• /
• v.3
• /
• pp.14-20
• /
• 1985

This study was carried out to evaluate the effects of whole layer placement of total of N.P.K. application with clay mineral such as Bentonits and Zeolite on the growth and the yield of rice in different sandy soils. The results obtained were as follows ; The yield was increased by whole layer placement of total amount of N.P.K. application with clay minerals in both soils examined compared with the treatment of N.P.K. only. In fine sandy loam soil, it was increased significantly at 5% level at N.P.K. + Zeolite 1.0 M/T and in fine sandy soil, at 5 % and 1 % at N.P.K. + Bentonits 0.5 M/T and N.P.K. + Bentonite 1.0 M/T, respectively. The nitrogen and silica content of rice straw at heading stage were increased and were tended to increase in phosphate and exchangeable cations such as potassium. calcium and magnesium by whole layer placement of total amount of N.P.K. application with clay mineral. The chemical properties of both soils were changed slightly after the harvest of rice by the whole layer placement of total amount of N.P.K. application with clay mineral ; pH, C.E.C., exchangeable base and available silica content were increased.

• 한국해양학회지
• /
• v.20 no.3
• /
• pp.1-5
• /
• 1985

Seasonal variations of heat content in the neighbouring seas of Korea are estimated from the bimonthly normals of seawater temperature in the upper 300m for 15 years (1961~1975) at 192 stations. The heat is seasonally stored mainly in the upper 100m layer in the East Sea and in the whole water column in the West and South Seas of Korea. The annual range of heat content changes in the West Sea is almost the same as that in the East Sea. The annual phase of heat content variation lags behind that of sea surface temperature variation by one to three months. Due to the seasonal advections of heat by currents and winds, the annual amplitude of heat storage rate in the neighbouring seas of Korea is much larger than that of incoming radiation.

• Biomedical Science Letters
• /
• v.17 no.3
• /
• pp.211-216
• /
• 2011

The chitosan-coated liposomes (chitosomes) were designed to improve the stability in the gastrointestinal (GI) tract and to enhance the efficacy for oral drug delivery of liposomes. The phosphatic acid (PA)-incorporated anionic liposomes were surface-coated with water soluble chitosan (WSC) by electro-ionic interaction. The shape of the chitosomes observed by transmission electron microscopy (TEM) was spherical in all the formulations and the coating layer by WSC could be founded through TEM images. The mean size and the zeta potential values of the chitosomes increased significantly with depending on the content of WSC added for coating the liposomes. The stability of the chitosomes in the GI tract was confirmed through the change of relative turbidity of the liposomal suspension. The plain liposomes (plasomes) suspension without adding WSC clearly showed the change of relatively turbidity in simulated gastric fluid (SGF), while the change degree of turbidity of the chitosomes in the SGF decreased as increasing of WSC content added for coating liposome. In the 5-CF release study from the plasomes and chitosomes, the plasomes released >90% of the initial 5-CF content at 4 h of release measurement. In contrast, the chitosomes released below 40% of initial content of 5-CF. In conclusion, these results indicate that the chitosomes can be used as a potential carrier for effective oral drug delivery.

• Journal of Electrochemical Science and Technology
• /
• v.11 no.3
• /
• pp.238-247
• /
• 2020

Some nano structured bimetallic NiPd electrocatalysts were electrodeposited on glassy carbon electrodes using a double potential step chronoamperometry. The morphology of the electrodeposited samples was investigated by field emission-scanning electron microscopy, while their compositions were evaluated using energy dispersive X-ray spectroscopy. It was observed that the electrodeposited samples contained a low Ni content, in the range of 0.80 - 7.10%. The electrodeposited samples were employed as the anode electro-catalysts for the oxidation of sodium borohydride in NaOH solution (1.0 M) using cyclic voltammetry, chronoamperometry, rotating disk electrode, and impedance spectroscopy. The number of exchanged electrons, charge transfer resistances, apparent rate constants, and double layer capacitances were calculated for the oxidation of borohydride on the prepared catalysts. According to the results obtained, the NiPd-2 sample with the lowest Ni content (0.80%), presented the highest catalytic activity for borohydride oxidation compared with the other NiPd samples as well as the pure Pd sample. The anodic peak current density was obtained to be about 1.3 times higher on the NiPd-2 sample compared with that for the Pd sample.

• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.3
• /
• pp.9-17
• /
• 2003

In this paper, thermo-mechanical and rheological properties of NCPs (Non-Conductive Pastes) depending on silica filler contents and diluent contents were investigated. And then, thermal cycling (T/C) reliability of flip chip assembly using selected NCPs was verified. As the silica filler content increased, thermo-mechanical properties of NCPs were changed. The higher the silica filler content was added, glass transition temperature ($T_g$) and storage modulus at room temperature became higher. While, coefficient of thermal expansion (CTE) decreased. On the other hand, rheological properties of NCPs were significantly affected by diluent content. As the diluent content increased, viscosity of NCP decreased and thixotropic index increased. However, the addition of diluent deteriorated thermo-mechanical properties such as modulus, CTE, and $T_g$. Based on these results, three candidates of NCPs with various silica filler and diluent contents were selected as adhesives for reliability test of flip chip assemblies. T/C reliability test was performed by measuring changes of NCP bump connection resistance. Results showed that flip chip assembly using NCP with lower CTE and higher modulus exhibited better T/C reliability behavior because of reduced shear strain in NCP adhesive layer.

• The Korean Journal of Ecology
• /
• v.6 no.3
• /
• pp.227-235
• /
• 1983

This research was made over drought resistance and optimum soil moisture needed with Plantago asiatica L. as the material by means of making out the process of its growth under different soil moisture contents. The soil used for the experiment was a mixture of vermiculite and c-layer soil, and the process of growth was compared with each other controlling its soil mositure as: 7%, 15%, 30%, 45%, and 60%. In 7% range of soil moisture which was of low content, the increase of growth was neither significantly indicated nor any permanent seeding done. In view of this phenomenon, Plantago asiatica L. appeared to be highly drought-resistant. It was found rising at 30% range and reaching the optimum state at 45% range and falling down at 60% range range. In viw of this fluctuation indicated above, the optimum soil moisture content needed for the growth of Plantago asiatica L. is thought to be between 30% and 60%. It is thought the number of seed per capsule is not affected by the soil moisture content. It is expected an ecotypic variation by the soil moisture content will bring forth upon Plantago asiatica L.