• 한국해양학회지
• /
• v.26 no.3
• /
• pp.193-203
• /
• 1991

KODOS (Korea Deep ocean Study)-89 sediments, recovered from western part of Clarion-Clipperton fracture zone in north Pacific, show two distinctly colored layer zones: surface yellow brown layer (unit A) and subsurface dark brown layer (unit B), and roughly recognized as Quaternary and Tertiary in age, respectively. Geochemical characteristics are also different in those two units. Smectite, water, micronodule, and heavy metal contents are higher in unit B, while POC content is higher in unit A. High smectite and low POC contents in unit B are due to the longer formation period of smectite, almost decomposition of labile organic matter in unit B relative to unit A. High water content in unit B is caused by coarse fabric which results from higher content of spicules and spines. Additionally, stronger electrostatic repulsion force caused by high smectite content also supports high water content in unit B relative to unit A. Variations in heavy metal contents are closely related to the amount of micronodule, which has higher metal contents than that of sediment. Therefore, we conclude that the differences of geochemical characteristics in unit A and unit B are resulted from the different diagenetic durations of unit A and unit B.

• Journal of Hydrogen and New Energy
• /
• v.30 no.6
• /
• pp.523-530
• /
• 2019

For the low-Pt electrodes for polymer electrolyte fuel cells (PEMFCs), the optimization of ionomer content for anode catalyst layers was carried out. A commercial catalyst of 20 wt.% Pt/C was used instead of 50 wt.% Pt/C which is commonly used for PEMFCs. The ionomer content varies from 0.6 to 1.2 based on ionomer to carbon ratio (I/C) and the catalyst layer is formed over the electrolyte by the ultrasonic spray process. Evaluation of the prepared MEA in the unit cell showed that the optimal ionomer content of the air electrode was 0.8 on the I/C basis, while the hydrogen electrode was optimal at the relatively high ionomer content of 1.0. In addition, a large difference in cell performance was observed when the ionomer content of the hydrogen electrode was changed. Increasing the ionomer content from 0.6 to 1.0 by I/C in a hydrogen electrode with 0.05 mg/㎠ platinum loading resulted in more than double cell performance improvements on a 0.6 V. Through the analysis of various electrochemical properties in the single cell, it was assumed that the change in ionomer content of the hydrogen electrode affects the water flow between the hydrogen and air electrodes bounded by the membrane in the cell, which affects the overall performance of the cell. A more specific study will be carried out to understand the water flow mechanism in the future, and this study will show that the optimization process of hydrogen electrode can also be a very important cell design variable for the low-Pt and high-performance MEA.

• Korean Journal of Food Science and Technology
• /
• v.34 no.2
• /
• pp.194-199
• /
• 2002

Eight Korean wheat cultivars were milled and evaluated for the properties of white layer cake-making, compared to a commercial soft wheat flour. Milling yields of the Korean wheat cultivars ranged from 62.5 to 71.8%. The protein and ash contents of flours milled from Korean wheat cultivars ranged from 7.70 to 10.58% and 0.51 to 0.71%, respectively. Woorimil, Alchanmil and Olgeurumil flours, having low protein content, showed very weak mixing characteristics. Even though Eunpamil and Geurumil flours showed longer mixing time and higher peak height, they had week dough stability. Slight differences in pH and specific gravity of cake batter were observed among the Korean wheat flours. Cake volume measured by rapeseed displacement was in the range of $837.5{\sim}952.5\;cc$. Alchanmil flour demonstrated the highest specific volume of 2.40, and the other domestic flours symmetrical and uniform than those with the commercial soft wheat flour. Volume of white layer cakes was negatively affected by flour protein content and somewhat associated with crumb softness. Crumb color of cakes prepared with domestic wheat flours was slightly darker and more yellowish. Hardness of fresh cakes prepared with domestic flours ranged from 307.33 to 416.60 $g_f$.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.04b
• /
• pp.671-676
• /
• 1998

This study deals with the effect on penetration properties of siliceous ion througth the mortar applicated by the waterproofing coating materials of siliceous seler liquid type. The tests of properties for reinforcing effect in mortar substrate surface layer are five kinds of water permeability, absorption, compressive strength, surface layer strength, pH content and chemical attack effect. Water permeability of mortar coated siliceous sealer in very than that of plane mortar. compressive strength of mortar coated siliceous sealer in larger than that of plane mortar about 10%.

• Journal of Korea Multimedia Society
• /
• v.23 no.6
• /
• pp.756-764
• /
• 2020

A typical algorithm used for image analysis is the Convolutional Neural Network(CNN). R-CNN, Fast R-CNN, Faster R-CNN, etc. have been studied to improve the performance of the CNN, but they essentially require large amounts of data and high algorithmic complexity., making them inappropriate for small and medium-sized services. Therefore, in this paper, the image label prediction algorithm based on CNN with collaborative layer with low complexity, high accuracy, and small amount of data was proposed. The proposed algorithm was designed to replace the part of the neural network that is performed to predict the final label in the existing deep learning algorithm by implementing collaborative filtering as a layer. It is expected that the proposed algorithm can contribute greatly to small and medium-sized content services that is unsuitable to apply the existing deep learning algorithm with high complexity and high server cost.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.215-219
• /
• 2007

In this work, the indium zinc oxide (IZO) films had been deposited on the glass substrate coated with the SiO film. Based on a comparative investigation of the IZO monolayer and IZO/SiO multilayer, it is shown that the thickness of SiO film has a great effect on the mechanical properties of the thin films. The AFM images of the IZO thin film included the SiO film were shown smoother surfaces than monolayer. Resistivity was in inverse proportion to Mobility. If it deposited the SiO film on the substrate, the layer of change was generated between two layer(SiO and substrate). The layer of change influenced resistance because of oxygen content was more than the IZO monolayer.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1360-1363
• /
• 2007

The bus electrode is composed of two layers. One is the black matrix(BM) and silver layer is formed on top of black layer. The BM paste is made by mixing $Co_3O_4$ black powder with photosensitive vehicle and rheological additives. In this work we studied the effect of $Co_3O_4$ black powder and glass frit on the rheological property of photosensitive BM paste. We also examined how the size and content of black powder and glass frit affect the transmittance and reflectance of the BM layer after sintering.

• Korean Journal of Materials Research
• /
• v.12 no.8
• /
• pp.676-681
• /
• 2002

Microstructure, mechanical properties, and oxidation resistance of TiAIN thin films deposited on quenched and tempered STD61 tool steel by arc ion plating were studied using XRD, XPS and micro-balance. The TiAIN film was grown with the (200) orientation. The grain size of TiAIN thin film decreased with increasing Al contents, while chemical binding energy increased with Al contents. When hard coating films were oxidized at $850^{\circ}C$ in air, oxidation resistance of both TiN and TiCN films became relatively lower since the surface of films formed non-protective film such as $TiO_2$. However, oxidation resistance of TiAIN film was excellent because its surface formed protective layer such as $_A12$$O_3$ and $_Al2$$Ti_{7}$$O_{15}$, which suppressed oxygen intrusion.

• Journal of the Korean Society for Precision Engineering
• /
• v.2 no.3
• /
• pp.41-46
• /
• 1985

The behavior of the burn-on in sand mold has been investigated by varying the pouring metal, bonding materials, additive materials and molding sand. The results obtained from thease experiments are as follows; 1) The burn-on layer of silica sand decreased in order of carbon steel, gray cast iron and stainless steel, and thease burn layer proceeded mostly by producing FeO. 2) The burning reaction of silica sand mold in carbon steel castings declined with increasingly bentonite content, but water-glass scarcely took part in the burn-on reaction. 3) The addition of feldspar and seacoal to silica sand promoted the inhibiting burn-on. 4) The burn-on layer of sand mold decreased of silica sand, chromite sand and olivine sand.

• 한국생물공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.30-33
• /
• 2002

We have shown that it is possible to form a fibrilar network of fibronectin on a polyelectrolyte polymer film whose dimensions are similar to those reported on the extra cellular matrix. The fibronectin network was observed to form only when the charge density of the polymer was in excess of the natural charge density of the cell wall. Furthermore, the self-organized fibronectin layer was much thicker than the polymer film, indicating that long ranged interaction may playa key role in the assembly process. It is therefore important to understand the structure of the polymer layer/protein interface. Here we report on a neutron reflectivity study where we explore the structure of the polyelectrolyte layer, in this case sulfonated polystyrene (PSSx,), with varying degree of sulfonation (x<30%), as a function of sulfur content and counter ion concentration. These results are then correlated with systemic study of the adsorption and the multilayer formation of fibronectin as a function of incubation time for various sulfonation levels of $PSSx.^1$