• Economic and Environmental Geology
• /
• v.57 no.4
• /
• pp.387-396
• /
• 2024

The geological disposal of high-level radioactive waste (HLW) involves permanently isolating the wastes in stable geological formations deep underground. Mudstone (siltstone and claystone) containing abundant clay minerals is proposed as a host rock for geological disposal of HLW because clay minerals have low permeability and high ion sorption/exchange capacity. Despite the widespread occurrence of sedimentary basins in Korea, there is a lack of evaluation of mudstone as host rocks for geological disposal. In this study, we utilized the JBH-1 borehole (7-754 m) obtained from the Jinju Formation to investigate the distribution trend and mineral compositions of mudstone. Additionally, we conducted comparative analyses with the Opalinus Clay in Switzerland considered as host rock of geological disposal of HLW. Claystone containing more than 40% clay minerals exhibit thick layers primarily in the upper section (7-350 m) of the JBH-1 borehole. While the clay minerals content of claystone does not show significant variation with depth, there are differences in the characteristics of feldspar and carbonate minerals. These mineralogical variations can led change in pore water chemistry and rock mechanical properties. The clay minerals content of claystone in the Jinju Formation is similar to that of the Opalinus Clay. However, there are notable differences in clay minerals composition. While the Opalinus Clay contains smectite-illite mixed-layer minerals, the Jinju Formation are dominated by illite indicating higher burial temperatures. This information will be useful for studying the host rock of HLW geological disposal site in Korea.

• Korean Journal of Mineralogy and Petrology
• /
• v.37 no.2
• /
• pp.35-46
• /
• 2024

This study investigated the origin and mineralogical-geochemical characteristics of a small ferromanganese (Fe-Mn) nodule sample obtained from the abyssal seafloor of the Magellan Seamount cluster. To this end, X-ray diffraction and X-ray fluorescence analyses were conducted. The dark brown Fe-Mn oxides constituting the nodule had a homogeneous texture without distinguishable layers, forming around three distinct nuclei. The oxides had a low average Mn/Fe ratio of 0.73 (0.24-1.10) and were characterized by high Co content (0.41-0.85 wt.%, average = 0.58 wt.%) as well as low Ni (0.06-1.24 wt.%, average = 0.55 wt.%) and Cu (0.27-1.02 wt.%, average = 0.59 wt.%) concentrations. The maximum age of the nodule was estimated at 0.52 Ma, suggesting that it began forming during the transition from the glacial to the interglacial periods in the middle Pleistocene. The Fe-Mn oxide layer comprised vernadite, smectite, quartz, and feldspar, while the nuclei were composed of soft sediments. The presence of vernadite, a typical hydrogenetic Fe-Mn oxide mineral, along with the low Mn/Fe ratio, high Co content, and low Ni and Cu concentrations, indicates that Fe-Mn nodules on the abyssal seafloor of the Magellan Seamount cluster in the western Pacific Ocean formed through hydrogenetic processes.

• Korean Journal of Materials Research
• /
• v.18 no.12
• /
• pp.678-682
• /
• 2008

This study investigates $Bi_2O_3$-$B_2O_3$-BaO-ZnO glass with variations of the $Co_3O_4$ content (0.25, 0.5, 1, and 2 wt%) and the interaction between transparent dielectric and Ag electrodes heat-treated at $500-560^{\circ}C$ for 30 min. The glass transition temperature, softening temperature and thermal expansion coefficient were $432^{\circ}C$, $460^{\circ}C$ and $81.4{\times}10^{-7}/^{\circ}C$, respectively. The transmittance of 0.25 wt% $Co_3O_4$ to which dielectric was added was highest and was decreased due to coloration with the addition of more than 0.25 wt%. However, without $Co_3O_4$, the transmittance of the transparent layer was decreased due to the formation of $Ba_5Bi_3$; however, the occurrence of the crystal phase decreased as a result of the addition of $Co_3O_4$. The amount of $Co^{2+}$ ions increased as the $Co_3O_4$ increased. With a maximum of $Co^{3+}$ ions, the highest transmittance was observed.

• Journal of the Korean Ceramic Society
• /
• v.50 no.1
• /
• pp.18-24
• /
• 2013

This study was conducted to recycle fly ash containing an abundance of CaO generated from combustion in a circulating layer as a carbon storage medium. The study utilized XRD, TG-DTA and XRF analyses during the hydration of fly ash and identified calcium substances within fly ash that could be used in a carbonation process. $Ca^{2+}$ ions in the calcium substances were easily converted to hydrates. A carbonation experiment was done, which used the method of $CO_2$ gas injection to produce suspensions by mixing fly ash with distilled water. The results were analyzed using TG-DTA, XRD, and pH meter measurements. The study was able to verify that the reaction was completed at a $CO_2$ flow rate of 300cc/min approximately 30 minutes after an injection into a solution with a solid-liquid ratio of 1 : 10 of fly ash and distilled water. Moreover, the stirring time of the suspensions did not influence the reaction, and the reaction time was found to diminish as the portion of the fly ash became smaller. Thus, this study produced carbon storage fly ash having a $CO_2$ storage rate of about 71% through the utilization of the CaO content contained within fly ash.

• Journal of Welding and Joining
• /
• v.34 no.3
• /
• pp.69-76
• /
• 2016

Characteristics of dissimilar metal welds between ASTM Type 316L and carbon steel ASTM A516 Gr.70 made with FCAW were evaluated in terms of microstructure, ferrite content, EDS analysis, hardness, tensile strength, impact toughness and corrosion resistance. Three heat inputs of 10.4, 16.9, 23.4kJ/cm were employed to make joints of dissimilar metals with E309LMoT1-1 wire. Microstructure of dissimilar weld metals consisted of mostly vermicular type of ${\delta}$-ferrite and some lathy type of ${\delta}$-ferrite, and ${\delta}$-ferrite was transformed into globular type in reheated zone. In all conditions, weld metals were solidified on FA solidification mode. Based on the EDS analysis of weld metals, All Creq/Nieq values were in the range of FA solidification mode, and it was decreased with increasing heat inputs whereas it was increased with increasing layers. The amount of ${\delta}$-ferrite was decreased with increasing heat input due to the difference of cooling rate, and it was increased with increasing layers. Accordingly, hardness and tensile strength of dissimilar metals weld joints was decreased with increasing heat input while impact energy was increased with increasing heat input. Corrosion test of dissimilar metals weld joints showed that weight gain rate of heat input 10.4kJ/cm was the greatest, and that of three heat inputs became constant after certain time.

• Korean Journal of Soil Science and Fertilizer
• /
• v.46 no.6
• /
• pp.549-555
• /
• 2013

Human influence on soil formation has dramatically increased as the development of human civilization and industry. Increase of anthropogenic soils induced research of those soils; classification, chemical and physical characteristics and plant growth of anthropogenic soils. However there have been no reports on soil pore properties from the anthropogenic soils so far. Therefore the objectives of this study were to test computer tomography (CT) to characterize physical properties of an anthropogenic paddy field soil and to find differences between natural and anthropogenic paddy field soils. Soil samples of a natural paddy field were taken from Ansung, Gyeonggi-do (Ansung site), and samples of an anthropogenic paddy field were from Gumi in Gyeongsangnam-do (Gasan) where paddy fields were remodeled in 2011-2012. Samples were taken at three different depths and analyzed for routine physical properties and CT scans. CT scan provided 3 dimensional images to calculate pore size, length and tortuosity of soil pores. Fractal analysis was applied to quantify pore structure within soil images. The results of measured physical properties (bulk density, porosity) did not show differences across depths and sites, but hardness and water content had differences. These differences repeated within the results of pore morphology. Top soil samples from both sites had greater pore numbers and sizes than others. Fractal analyses showed that top soils had more heterogeneous pore structures than others. The bottom layer of the Gasan site showed more degradation of pore properties than ploughpan and bottom layers from the Ansung site. These results concluded that anthropogenic soils may have more degraded pore properties as depth increases. The remodeled paddy fields may need more fundamental remediation to improve physical conditions. This study suggests that pore analyses using CT can provide important information of physical conditions from anthropogenic soils.

• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.3
• /
• pp.196-200
• /
• 2007

This study was to determine long-term changes of polycyclic aromatic hydrocarbons (PAHs) in paddy soils. To do this, we analyzed 16 PAHs in soil samples which were stored in the archive of Yeoungnam Agricultural Research Institute, Milyang, Kyeoungnam province, Korea. The samples used in this study were collected every year from 1978 to 2001 at the plough layer (0-12cm). In average, total PAHs accumulated in paddy soil was continuously decreased since 1980 when it peaked to be $237g\;kg^{-1}$. No significant changes were observed for PAHs having 5-6 phenyl rings for the past two decades, whereas PAHs with 3-4 phenyl rings were greatly decreased, reaching at about a half levels of the 1980's. It is worthy to be noted that the large reduction in PAHs with 3-4 phenyl rings has mainly been attributed to the decrease of PAHs in paddy soils for last 20 years. The major compounds accumulated were: phenanthrene > fluoroanthene > chrysene/benzo(b)fluoroanthene. The present results suggest that the switch of main fuels used in Korea from coal to petroleum around at the end of 1970's is likely contributed to decrease in PAH accumulation in paddy soils.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.38 no.3
• /
• pp.209-217
• /
• 2012

One of the popular formulations is microemulsion in cosmetics. A kind of microemulsions is liquid crystal emulsion. Liquid crystal emulsion is used by wrapping functional ingredients. As the meaning of the name, Liquid crystals (LCs) are a state of matter that has properties between those of a conventional liquid and those of a solid crystal. There are various types of Liquid crystals (LCs) consisting of micelles or two layer structures of surfactants. Recently, microemulsion has been studied to improve its stability in thermodynamics of colloid science field. In this study, we prepared the microemulsion with PEG-8 Capryliccapric Glycerides and Polyglyceryl-3 Diisostearate. We studied the microemulsion with different oil types and different and cosurfactant content ratio. Also, the aim of this study is to develop a facial oil or a cleansing oil containing liquid crystal emulsion with functional ingredients.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.7
• /
• pp.1132-1137
• /
• 2003

This study dealt with the suppression of interfacial reaction between Nb and MoSi$_2$ for the fabrication of high toughness Nb/MoSi$_2$ laminate composites, based on the results of a thermodynamical estimation. Especially, the effect of ZrO$_2$ particle on the interfacial reaction of Nb/MoSi$_2$ bonding materials has been examined. Nb/MoSi$_2$ bonding materials have been successfully fabricated by alternatively stacking matrix mixtures and Nb sheets and hot pressing in the graphite mould. The addition of ZrO$_2$ particle to MoSi$_2$ matrix is obviously effective for promoting both the interfacial reaction suppression and the sintered density of Nb/MoSi$_2$ bonding materials, since it is caused by the formation of ZrSiO$_4$ in the MoSi$_2$-ZrO$_2$ matrix mixture. The interfacial shear strength of Nb/MoSi$_2$ bonding materials also decreases with the reduction of interfacial reaction layer associated with the content of ZrO$_2$ particle and the fabrication temperature.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.186-186
• /
• 2009

Most liquid crystal display modes, including the twisted nematic (TN) $mode^1$, the in-plane switching (IPS) $mode^2$, the fringe field switching (FFS) $mode^3$, and the vertically aligned (VA) $mode^4$ are based on either a horizontal or a vertical alignment. However, for some applications, such as no-bias-bend (NBB) pi cell or bistable bend-splay display, an intermediate pretilt angle is essential$^5$. NBB pi cells have been a focus of interest because of their fast response time; however, the reliable control of the intermediate pretilt angle of liquid crystals that is required for the fabrication of NBB pi cells is challenging. The controllable pre-tilt angle of liquid crystals was investigated using a blend of horizontal and vertical polyimide prepared by a rubbing method. Various pretilt angles in the range from 0^{\circ}$ to 90^{\circ}$ were achieved as a function of the vertical polyimide content. We observed uniform liquid crystal alignment on the rubbing-treated blended polyimide layer. A NBB pi cell with an intermediate pretilt angle of 47.8^{\circ}$ was manufactured. This cell had no initial bias voltage and a low threshold voltage, which indicates that it has low power consumption. In addition, the response time of the NBB pi cell was rapid.