• Journal of Ginseng Research
• /
• v.9 no.2
• /
• pp.204-212
• /
• 1985

Lipid and fatty acid compositions of the bound lipids in Panax quinquefolium (Korea, Japan and China), Panax quinquefolium (America, Canada) and Panax notoginseng (China) were studied by means of silicic acid column chromatography, thin-layer chromatography and gas-liquid chromatography. The could lipid contents in various ginsengs were 0.29 to 0.48%, in which neutral lipid fractions were 63.6 to 67.3%, glycolipid fractions 21.9 to 25.7% and phospholipid fractions 7.7 to 12.4%. The content compositions of neutral lipid fractions were lower and those of glycolipid and phospholipid fractions were higher in the bound lipids than in the free lipids from the various ginseng. The major components were fatty acids, diglycerides and free sterols in neutral lipid fractions, monogalactosyl diglyceride, sterol glucoside and esterified steryl g1ycoside in glycolipid fractions and phosphatidyl glycerol, phosphatidyl ethanolamine and phosphatidic acid in phosphoipid fractions. Seventeen fatty acids were analyzed in the four bound lipid fractions from the various ginsengs and main fatty acids were linoleic acid, palmitic acid and oleic acid. Total saturated fatty acid and palmitic acid contents were higher and total unsaturated fatty acid and linoleic acid contents lower in the total bound lipids than in the total free lipids from the various ginsengs.

• 연구논문집
• /
• s.28
• /
• pp.183-192
• /
• 1998

The wear and oxidation resistance of two phase nickel aluminides was investigated. Wear tests of various heat-treated specimens at room temperature and at $500^{\circ}C$ were performed under no lubricant condition in air by using a ball-on-disk type tribotester. Isothermal oxidation tests were made at $1100^{\circ}C$ in air flowing at the rate of 70cc/min and at $1000^{\circ}C$ in air by using TGA. Experimental results from wear tests showed that nickel aluminide with a higher content of Al had an improved wear resistance at both temperatures. Also the examination of the wear tracks after wear test at both room temperature and $500^{\circ}C$ indicated that regardless of the alloy compositions the wear tracks of the two phase nickel aluminides showed an abrasive type wear The improved oxidation resistance observed in the Ni-34at%Al alloy could to be attributed to the microstructural difference between the aluminides. An accelerated oxidation along the thin layer of $Ni_3AL$ along the grain boundary observed in the microstructure of the Ni-32at%Al aluminide could be attributed to the poor oxidation resistance.

• The Korean Journal of Ecology
• /
• v.19 no.3
• /
• pp.209-216
• /
• 1996

In order to identify the habitat characteristics of water shield (Brasenia schreberi), water quality and sediment characters were investigated. Water shield had peculial habitats such as old reservoir, developed basin-like reservior, a water depth within 1.5 m, constant water level, and thick sediment layer at the bottom. The species had very dense populations under the favorable growing conditions and occasionally grew together with Utricularia japonica. When water shield decreased, Nelumbo nucifera, Nuphar japonicum and Zizania latifolia increased. Natural populations of water shield need protection because it is endangered by the human activities and their harvest. The optimal conditions for the growth of water shield was near neutral pH. low conductivity and low turbidity. Therefore the input of pollutants should be controlled for its growth. The inorganic ion contents such as K, Mg, and Na were higher in the water shield growing area. Especially iron content of the sediments in the reservoirs with water shield was nearly five times as high as that in the reservoirs without water shield. thus iron might be one of the major limiting factors for the growth. It was considered that molybdenum can be another major factor because water shield is a nitrogen fixing plant.

• Carbon letters
• /
• v.23
• /
• pp.9-16
• /
• 2017

This paper introduces a nitrogen-doped ordered mesoporous carbon (NOMC) derived from glucosamine with hybrid capacitive behaviors, achieved by successfully combining electrical double-layer capacitance with pseudo-capacitance behaviors. The nitrogen doping content of the fabricated NOMC reached 7.4 at% while its specific surface area ($S_{BET}$) and total pore volume reached $778m^2g^{-1}$ and $1.17cm^3g^{-1}$, respectively. A dual mesoporous structure with small mesopores centered at 3.6 nm and large mesopores centered at 9.9 nm was observed. The specific capacitance of the reported materials reached up to $328Fg^{-1}$, which was 2.1 times higher than that of pristine CMK-3. The capacitance retention rate was found to be higher than 87.9% after 1000 charge/discharge cycles. The supplementary pseudocapacitance as well as the enhanced wettability and conductivity due to the incorporation of nitrogen heteroatoms within the carbon matrixes were found to be responsible for the excellent capacitive performance of the reported NOMC materials.

• Journal of the Korean Ceramic Society
• /
• v.50 no.6
• /
• pp.460-465
• /
• 2013

Plate-shaped inorganic particles are coated onto a stainless steel substrate by the electrophoretic deposition of a precursor slurry which includes the inorganic particles of $Al_2O_3$ and polymer resin in mixed solvents to mimic the abalone shell structure, which is a composite of plate-shaped inorganic particles and organic interlayer binding materials with a layered orientation. The process parameters of the electrophoretic deposition include the voltage, coating time, and conductivity of the substrate. In addition, the suspension parameters are the particle size, concentration, viscosity, conductivity, and stability. We prepared an organic-inorganic composite coating with a high inorganic solid content by arraying the plate-shaped $Al_2O_3$ particles and electrophoretic resin via an electrophoretic deposition method. We analyzed the effect of the slurry composition and the electrophoretic deposition process parameters on the physical, mechanical and thermal properties of the coating layer, i.e., the thickness, density, particle orientation, Young's modulus and thermogravimetric analysis results.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.18 no.3
• /
• pp.328-332
• /
• 1989

The main Kernels(7 and 18 mesh) of naked barley were pearled to remove 5% of the outer layer of the Kernel. The contents of protein, fat, ash and minerals of pearled barley with pearling degrees of $78{\sim}100%$ were analyzed. All components were decreased with the increase of pearling degrees. The decrease of protein was lesser than that of ash or fat. Among minerals P, K, Mg and Na sharply decreased while Fe and Ca slightly decreased upon pearlig.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2006.11a
• /
• pp.13-16
• /
• 2006

This study investigates filed application in Daebul Free Trade Zone of a flowing method using drying shrinkage-reducing superplasticizer(SRS) and an insulating curing method using double bubble sheets. Test showed that fresh concrete satisfied target slump and air content. A structure adding SRS significantly decreased the total bleeding capacity and accelerated the setting time. As for the crack occurrence, the structure applying the flowing method and double bubble sheets simultaneously exhibited the most favorable crack endurance, while conventional concrete showed more than 1mm size of crack in overall, and a structure applying only the flowing method partially presented micro crack. For the area proportion of crack occurrence, the structure using the double bubble sheets indicated 9.8%, while others applying flowing method was 28%, compared with 100% of conventional one. Standard curing specimens had about $3{\sim}6%$ higher compressive strength than that of specimens cured at adjacent field construction. In addition, using SRS improved about $5{\sim}7MPa$, than that of conventional concrete at 91 days elapse.

• Journal of the East Asian Society of Dietary Life
• /
• v.26 no.5
• /
• pp.407-417
• /
• 2016

Effects of resistant starch as a functional substitute on the quality of Yukwa were determined. Replacement ratios of resistant starch were 2, 4, and 6% of glutinous rice flour. Regarding pasting properties of Yukwa dough replaced with resistant starch, initial pasting temperature significantly increased and peak viscosity significantly decreased with increasing resistant starch. The moisture contents of bandegi and Yukwa base replaced with resistant starch were higher than that of the control. The expansion ratio of Yukwa base replaced with resistant starch significantly decreased with increasing resistant starch, and there were no significant differences in the oil absorption ratio. Lightness (L) of Yukwa base replaced with resistant starch increased significantly with increasing resistant starch. Appearance of Yukwa base replaced with resistant starch showed a shortened length and increased width with increasing resistant starch, and cross-section showed an oval shape, fine air cell distribution, and increased outer layer thickness. Hardness and peak number increased significantly with increasing resistant starch. The overall acceptability of Yukwa base replaced with 6% resistant starch was the highest among the samples, but the result was not significant. The above results show that resistant starch substitution in Yukwa improved the texture and further could improve health functionality due to its dietary fiber content. Resistant starch was appropriate as a 6% replacement for glutinous rice flour in Yukwa.

• Proceedings of the SCSK Conference
• /
• 2003.09b
• /
• pp.200-200
• /
• 2003

Intact mammalian hair and wool fibres are multi-compartmental composite materials consisting of a sulphur-rich outer protective cuticle layer surrounding elongated, highly keratinized, cortex cells. The cortex cells themselves are made up of crystalline, filamentous, low-sulphur a-helical keratin molecules embedded in a matrix of highly cross-linked, globular high-sulphur keratins. It is the structurally organised and highly disulphide cross-linked nature of these materials that provides them with their remarkable mechanical properties. However these mechanical properties are sensitive to environmental conditions such as water content, temperature and chemical treatment and the importance of their ultra-structural arrangements to overall mechanical properties in different environments is still not fully understood.(omitted)

• Bulletin of the Korean Chemical Society
• /
• v.34 no.8
• /
• pp.2291-2296
• /
• 2013

An efficient carbon monoxide (CO) sensor was developed based on poly(3,4-ethylenedioxy)thiophenepoly(styrenesulfonate) (PEDOT:PSS) modified with a new pyrimidine-fused heterocyclic compound, bis(2-hydroxyphenyl)dihydropyrido[2,3-d:6,5-d]dipyrimidine-tetraone (B2HDDT). B2HDDT remains stable in the polymer matrix through interactions with functional groups of the polymer. It created prominent sites that captured CO gas, and the experimental parameters, including the amount of doped B2HDDT in the PEDOT:PSS film, were optimized. The sensor probe was also examined to verify its reliability for detecting CO in the presence of atmospheric gases in a discriminating manner. NMR, AFM, and FT-IR spectra were obtained to evaluate the structure and morphology of the B2HDDT-doped PEDOT:PSS (PEDOT:PSS/B2HDDT) film. The content of 35 vol % B2HDDT (7.0 mM) in PEDOT:PSS provided the largest response factor (${\Delta}R/R_o$) for the CO gas. The sensor response was reproducible, with a relative standard deviation < 5% (n = 5). The detection limit was determined to be $0.44{\pm}0.05$ vol %.