• Environmental Engineering Research
• /
• v.18 no.3
• /
• pp.129-137
• /
• 2013

The infiltration of rainwater into the surface soil is highly dependent on hydraulic variables, such as the infiltration rate, capillary fringe, moisture content, and unsaturated/saturated hydraulic conductivity. This study estimates the hydraulic conductivity (K) of fluvial deposits at three sites on the right and left banks of Nakdong River in Gyeongbuk Province, South Korea, including the Gumi, Waegwan, and Seongju bridge sites. The K values of 80 samples from 13 boreholes were estimated by using six grain-size methods (Hazen, Slichter, Kozeny, Beyer, Sauerbrei, and Pavchich formulae). The Beyer, Hazen, and Slichter methods showed a better relationship with K values along with an effective grain size than did the other three methods. The grain-size, pumping test, and slug test analyses resulted in different K values, but with similar K values in the grain-size analysis and pumping test. The lower K values of the slug test represent the uppermost fine sand layer.

• Journal of Biosystems Engineering
• /
• v.32 no.5
• /
• pp.309-315
• /
• 2007

This study was performed to develop a simulation model of circulating concurrent-flow rice dryer. The simulation model consists of drying model, tempering model and crack prediction model. The drying and tempering models were developed based on mathematical analysis, and the crack prediction model was developed by thin layer drying tests. Rice drying tests were done with three replications by use of a pilot scale dryer of holding capacity of 700 kg. Experimental values for moisture content, rice temperature, rice crack, and drying energy were compared with predicted values by simulation model. The RMSEs of predicted moisture contents were ranged from 0.5807% (d.b.) to 1.1951% (d.b.). and the coefficients of determination were 0.9688 to 0.9812. The RMSEs of predicted rice temperatures at the exit of the drying chamber were 1.83 to $3.81^{\circ}C$ and the coefficients of determination were 0.8834 to 0.9482. The results for moisture contents and rice temperatures showed very good relationships between predicted values and experimental values. The RMSEs of predicted value of crack ratio were 0.4082 to 0.7967% and the coefficients of determination were 0.8742 to 0.9547.

• Journal of the Korean Applied Science and Technology
• /
• v.15 no.4
• /
• pp.63-69
• /
• 1998

The beeswax sample was collected from the beehives, isolated and then refined. The first step of producing beeswax was to separate honey from beehives. The beehives which were cut put in hot water. The upper layer was crude beeswax, which was treated with phosphoric acid. The crude beeswax was purified through the bleaching. The objectives of this study are to identify headspace volatile compounds and to know the contents of ${\alpha}$-carotenes and ${\beta}$-carotenes of korean beeswax. Headspace volatile compounds of Korean beeswax were measured by using the combination of dynamic headspace sampler (DS 5000, Donam System Inc.), gas chromatography and mass selective detector (HP5890 & 5971, Hewlett Packard). Seventy five compounds identified from about 100 peaks by analyzing the purified beeswax were 60 hydrocarbons, 8 carbonyls, 4 essential oils, 3 esters. Carotenes of Korean beeswax were analyzed by using High Performance Liquid Chromatography (Waters Inc.). As A result, the content of ${\alpha}$-carotenes and ${\beta}$-carotenes were 0.07ppm, 0.011ppm individually.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.10
• /
• pp.1422-1427
• /
• 2013

Scutellaria baicalensis (SB), a traditional herb with high pharmacological value, contains more than 10% flavone by weight. To improve the biological activity of flavones in SB, we aimed to enhance the bioconversion of baicalin (BG) to baicalein (B) and wogonoside (WG) to wogonin (W) in SB during fermentation using beta-glucuronidase produced from Lactobacillus brevis RO1. After activation, L. brevis RO1 was cultured in milk containing SB root extract with various carbon or nitrogen sources at $37^{\circ}C$ for 72 h. During fermentation, the growth patterns of L. brevis RO1 and changes in the flavone content were assessed using thin-layer chromatography and high-performance liquid chromatography. After 72 h of fermentation, the concentrations of B and W in the control group increased by only 0.15 and 0.12 mM, respectively, whereas they increased by 0.57 and 0.24 mM in the fish peptone group. The production of B and W was enhanced by the addition of 0.4% fish peptone, which not only improved the growth of L. brevis RO1 (p < 0.001) but also enhanced the bioconversion of flavones. In conclusion, the bioconversion of flavones in SB may provide a potential application for the enhancement of the functional components in SB.

• Polymer(Korea)
• /
• v.34 no.1
• /
• pp.84-87
• /
• 2010

Copper-indium-diselenide (CIS) particles were prepared by the electrochemical reduction from the mixture solution of corresponding ion compounds. The prepared CIS was used as an insertion layer or a blending component in the organic photovoltaic bulk heterojunction cells composed of poly(3-octylthiophene) and fullerene. The increase of CIS content resulted in the rapid decrease of the open-circuit voltage as well as short-circuit current. The photovoltaic parameters were analyzed in relation to the structures, composition, and morphology of the photovoltaic blends.

• Journal of the Korean Ceramic Society
• /
• v.31 no.11
• /
• pp.1330-1336
• /
• 1994

Ta2O5 films were deposited on the p-Si(100) substrates by ECR-PECVD and annealed in O2 atmosphere. The thicknesses of Ta2O5/SiO2 layers were measured by an ellipsometer and a cross-sectional TEM. Annealing in O2 atmosphere enhanced the stoichiometry of the Ta2O5 film and reduced the impurity carbon content. Ta2O5 films were crystallized at the annealing temperatures above 75$0^{\circ}C$. The best leakage current characteristics and the maximum dielectric constant of Ta2O5/SiO2 film capacitor were observed in the specimen annealed at $700^{\circ}C$ and 75$0^{\circ}C$, respectively. The flat band voltage of the Al/Ta2O5/SiO2/p-Si MOS capacitor was varied in the range of -0.6~-1.6 V with the annealing temperature. The conduction mechanism in the Ta2O5 film, the variation of the effective oxide charge density with the annealing temperature, and the effective electric field distribution in the Ta2O5/SiO2 double layer were also discussed.

• Carbon letters
• /
• v.12 no.4
• /
• pp.223-228
• /
• 2011

In this present work, the effect of additional heat-treatment (AHT) in the range from $1800^{\circ}C$ to $2400^{\circ}C$ on the chemical composition, morphology, microstructure, tensile properties, electrical resistivity, and thermal stability of commercial polyacrylonitrile (PAN)-based carbon fibers was explored by means of elemental analysis, electron microscopy, X-ray diffraction analysis, single fiber tensile testing, two-probe electrical resistivity testing, and thermogravimetric analysis (TGA). The characterization results were in agreement with each other. The results clearly demonstrated that AHTs up to $2400^{\circ}C$ played a significant role in further contributing not only to the enhancement of carbon content, fiber morphology, and tensile modulus, but also to the reduction of fiber diameter, inter-graphene layer distance, and electrical resistivity of "as-received" carbon fibers without AHT. The present study suggests that key properties of commercial PAN-based carbon fibers of an intermediate grade can be further improved by proprietarily adding heat-treatment without applying tension in a batch process.

• Journal of the Korean Ceramic Society
• /
• v.56 no.2
• /
• pp.173-177
• /
• 2019

Thermal properties of a SiO₂-B₂O₃-BaO ternary glass system depending on compositional change of BaO have been examined to find a proper sealing material for reversible oxide cells. Glass transition temperature and thermal expansion coefficients increased simultaneously up to 55 mol% of BaO content. The structural role of BaO with regard to the thermal properties has been discussed on the basis of Raman spectroscopy results. Flowability of the glass at sealing temperature has been examined with packed glass powders of 12 mm diameter along with a high temperature optical microscope. The practical sealing property of the glass was also examined with YSZ coated with NiO-yittria stabilized zirconia (NiO-YSZ) and it showed good adhesion without noticeable reaction with NiO-YSZ layer.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.6
• /
• pp.324-327
• /
• 2009

In the present study, the effect of Ca additions on the ignition and combustion behaviors of Mg alloys has been investigated. Cracks and inclusions were observed at the free surface and interior in as-cast pure magnesium but not in Ca-bearing Mg alloys. There was a tendency that ignition temperature rapidly increased with increasing Ca content in Mg-Ca alloy. Saturated composition for increasing of ignition temperature was related with solid solubility of Ca in Ca-bearing Mg alloys. The protective oxide layers, MgO, could also be found on the combustion surface of Ca-bearing magnesium alloy.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.495-498
• /
• 2006

The influence of various process parameters for the as-deposited poly silicon was investigated. The polycrystalline silicon films were successfully deposited on glass substrates at a low-temperature $(<200^{\circ}C)$ using the catalytic chemical vapor deposition (Cat-CVD). We achieved a low hydrogen content $({\sim}0.9%)$ and a high deposition rate $({\sim}35{\AA}/sec)$. The film is applicable to thin film transistors on plastic substrates.