• Restorative Dentistry and Endodontics
• /
• v.34 no.1
• /
• pp.51-60
• /
• 2009

The purpose of this study was to perform quantitative comparisons of water permeable zones in both the adhesive and the hybrid layer before and after thermo cycling in order to assess the integrity of the bonding interface. Twenty eight flat dentin surfaces were bonded with a light-cured composite resin using one of four commercial adhesives [OptiBond FL (OP), AdheSE (AD), Clearfil SE Bond (CL). and Xeno III (XE)]. These were sectioned into halves and subsequently cut to yield 2-mm thick specimens; one specimen for control and the other subjected to thermocycling for 10,000 cycles. After specimens were immersed in ammoniacal silver nitrate for 24 h and exposed to a photo developing solution for 8 h, the bonded interface was analyzed by scanning electron microscopy (SEM) and wavelength dispersive spectrometry (WDS) at five locations per specimen. Immediately after bonding. the adhesive layer of OP showed the lowest silver uptake, followed by CL, AD. and XE in ascending order (p < 0.0001); the hybrid layer of CL had the lowest silver content among the groups (p = 0.0039). After thermocycling, none of the adhesives manifested a significant increase of silver in either the adhesive or the hybrid layer. SEM demonstrated the characteristic silver penetrated patterns within the interface. It was observed that integrity of bonding was well maintained in OP and CL throughout the thermocycling process. Adhesive-tooth interfaces are vulnerable to hydrolytic degradation and its permeability varies in different adhesive systems, which may be clinically related to the restoration longevity.

• Korean Journal of Agricultural Science
• /
• v.34 no.1
• /
• pp.53-60
• /
• 2007

A layer feeding trial was conducted for 10 weeks to investigate the effects of the addition of corn distillers dried grains with solubles (DDGS) to layer diets on the laying performance, egg qualities, and yolk fatty acid composition. Nine hundred Hyline Brown layers, 24 weeks of age,were randomly allotted to 20 replicate laying cages, 45 birds per replicate. There were four diet treatments (0, 10, 15, and 20% DDGS), and five replicates per treatment. All experimental diets were prepared to contain iso-protein (17%) and iso-calorie (TMEn 2,780 kcal/kg). The use of DDGS up to 20% level in layer diets did not exert any influence on feed intake, laying rate, total egg mass, mean egg weight, and feed conversion ratio. DDGS did not exert any influence in weight of egg, breaking strength, and color of eggshell. The albumen height and Haugh unit was not influenced by DDGS addition. The yolk color was significantly increased by DDGS supplementation. As the DDGS level increased, the oleic acid content decreased, and the linoleic acid increased (P<0.05). The degree of saturation of yolk fatty acids was not affected by dietary DDGS. The inclusion of DDGS up to 20% in layer diets resulted in the decrease of feed cost per kg without any effect in the laying performance. In conclusion, the use of DDGS up to 20% level in layer diets could replace corn and soybean meal without any harmful effect on the laying performances.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.11
• /
• pp.1638-1642
• /
• 2006

An experiment was conducted to elucidate the effect of graded levels of vitamin $D_3$ in White Leghorn (WL) layer breeders on egg production, shell quality, hatchability of eggs and juvenile performance of offspring during their late laying period (72-88 wk). White Leghorn breeder females were randomly divided into 5 groups of 50 each and were housed in individual California cages in an open-side housing system. Considering birds in five cages as a replicate, 10 such replicates were randomly allotted to each treatment. A basal diet was formulated containing all the nutrients as recommended for WL layers except vitamin $D_3$, which served as control. Another, four diets were formulated by supplementing graded levels of feed grade crystalline cholecalciferol to the basal diet that contained 300, 600, 1,200 and 2,400 ICU of vitamin $D_3$ per kg. Each diet was offered ad libitum to one of the above five treatment groups. The egg production, egg weight, daily feed consumption and the feed intake per dozen eggs or kg egg mass of the birds fed diet without any supplemental vitamin $D_3$ was comparable with those of supplemental groups. Similarly, the level of vitamin in the diet did not have any effect on any of the above parameters. However, the specific gravity of eggs laid by the birds fed the diet without supplemental vitamin $D_3$ was comparable with either 600 or 2,400 ICU supplemental groups but significantly higher when compared to the 300 and 1,200 ICU groups. The egg -shell breaking strength was significantly lowered in the 600 ICU supplemental groups as compared to the strength of other dietary groups. The Haugh unit, egg shell weight, shell thickness, tibia breaking strength, bone ash and calcium content were not influenced by vitamin $D_3$ concentration in the diet. Serum Ca concentration was influenced by vitamin $D_3$ level in the diet. The serum Ca concentration of birds fed either control or the vitamin supplemented diet up to 1200 ICU/kg diet was comparable. However, increasing the concentration of vitamin $D_3$ to 2,400 ICU/kg diet significantly enhanced the concentration of Ca in the serum, which was significantly higher compared to other dietary groups. The serum concentration of P and protein, however, was not influenced by level of vitamin $D_3$ in the diet. Neither fertility nor hatchability was influenced by vitamin $D_3$ concentration in the diet. Feeding a vitamin $D_3$ deficient diet or supplementation of vitamin to hens did not have any influence on their progeny chicks. It can be concluded that dietary supplementation of vitamin $D_3$ may not be essential for optimum production, shell quality, hatchability, and juvenile performance of WL breeders during 72 to 88 weeks of age.

• Restorative Dentistry and Endodontics
• /
• v.27 no.4
• /
• pp.382-388
• /
• 2002

Compomer is composed of matrix and filler : matrix is made of the combination of resins and polycarboxylic molecules that are light-cured, and a filler is a glass component which is capable of ion-release. The resin content of compomers produces polymerization shrinkage which can adversely affect marginal adaptation. Pretreatment is a fundamental step which is treated with conditioner or primer in the use of these materials. Microleakage of restorative materials has been investigated mostly by dye penetration method. Dye penetration method was not quantitative and not measured repeatedly. Fluid filtration method, introduced and developed by Pashley's group, has been extensively used for 20 years for research purpose to understand the physiology of dentin, as well as the effects of various restorative treatments on dentin permeability. It permits quantitative, nondestructive measurment of microleakage in a longitudinal manner. The purpose of this study was to evaluate the change of dentin permeability according to the process of compomer restoration. In this study. Cl V cavities were prepared on buccal surface of thirty extracted human molars. The prepared cavities were etched by 37% phosphoric acid. The experimental teeth were randomly divided into three groups. Each group was treated with following materials Group 1 : Prime & Bond NT/Dyract AP, Group2： Single Bond/F2000 compomer, Group 3 : Syntac Single Component/Compoglass. The bonding agent and compomer were applied for each group following manufacturers information. Dentin permeability of each group was measured at each process by fluid filtration method; Step 1 : preparation(smear layer). Step 2 : etching(smear layer removal), Step 3 : applying the bonding agent, Step 4 : filling the compomer. Dentin permeability was expressed by hydraulic conductance ($\mu\textrm{l}$ min$^{-1}$cm$H_2O$$^{-1}$). The data were analysed statistically using One-way ANOVA and Sheffe's method. The results were as follows : 1. Dentin permeability differences between each process were significant except between step 1 and step 2(p<0.01). 2. Dentin permeability after removal of smear layer was highly increased(p<0.01). 3. In most case, decrease of dentin permeability was obtained by applying bonding agent(p<0.01). 4. Dentin permeability differences among the experimental groups were not significant(p>0.05). 5. None of compomers used in this study showed perfect seal at the interface.

• The Korean Journal of Ecology
• /
• v.16 no.3
• /
• pp.239-259
• /
• 1993

The vegetation types and distributional characteristics of the forest vegetation on Mt. Ilwol were investigated by the Z-M school method. Geographical distribution of the vegetation was a central/montane(CEMO) type of the Korean Peninsula subtype. The forest was classified into five vegetation units: Artemisio-Quercetum mongolicae (Artemisio-Quercetum typicum subass. nov., Artemsio-Quercetum pinetosum dens~florae subass. nov. ). Lychno-Quercetum mongolicae (Lychno-Quercetum Calamagrostetosum arundinaceae subass. nov.. Lychno-Quercetum ligularetosum f~scherii subass. nov.), Fraxinus rhynchophylla community, Quercus variabilis community and Larix leptolepis afforestation. Species with percentage constance degree more than 61% are Quercus mongolica (89.5%, V), Lespedeza maximowiczii (73.7%, IV), Isodon japonicus(73.7%, IV), Fraxinus rhynchophylla (68.%, IV), Arlemisia stolonifera (65, 8%, IV), etc. Artemisio-Quercetum mongolicae was chiefly distributed on the ridge lines of low altitudes (570~700m) and on the ground with exposed rocks in sloping surface (800~1, 000m). Both Fraxinus sievoldiana and Rhododendrou schlippenbachii of the Artemisio-Quercetum mongolicae showed a predominant condition all over the subtree and shrub layers. Of Artemisio-Quercetum pinetosum densifloraes, Pinus densiflora becomes powerful over the tree layer and, on the other hand, Quercus mongolica over the subtree layer. Lychno-Quercetum mongolicae was distributed somewhat on the humid region of the high altitude area (840~1.200m). Fraxinus rhynchophylla community was chiefly distributed in the vicinity of the ravines. Quereus rariabilis community was distributed at subxeric slope on southeast side of the mountain. Larix leptolepis has been reforested at the ecotone between Artemisio-Quercetum mongolicae and Lychno-Quercetum mongolicae. Percentage cover degrees of the subtree layer In Lychno-Quercetum mongolicae, Quereus rariabilis community and Larix leptolepis afforestation were relatively low, 15.3%, 5% and 2.5%, respectively.The contents of moisutre and organic matter in the soil were much higher in Luchno-Quercetum monogolicae and Larix leptolepis afforestaion than in the other communities. Contents o Ca, Mg, K and the available phosphorus were relaively high compared with forests of the other area. This result seems to be influenced by a forest fire. As the altitude increases, the moisure content in the forest soil also increases.

• The Korean Journal of Ecology
• /
• v.17 no.1
• /
• pp.1-9
• /
• 1994

This study focuses on forest fires attributed to cigarette light, the main source of wild fires, by examining the characteristics of the fire types. It aims to present useful data for preventive measures. Statistics show that the average length of cigarette butts left after smoking is 30mm excluding filter for domestic cigarette smokers. Also the average thickness of litter layer in forests is 58.2mm throughout the nation. The value varies according to how often leaves were trodden by hikers : the accumulation amount of Mt. Sunchi. which is relatively protected from human disturbances, is 29.6% more than that of Mt. Kye-Ryong National Park. Aged trees such as Pznus rzgidu, Quercus acutissima and Larix leptolepis have relatively large inflammable contents, 2.43kg in 15 year-old stand and 2.55kg in 10 year-old stand. This study found out the following fact with regard to the start of lighting and the out-break of fire. Fire breaks out within five minutes in the sample(C), in which Zoysza gaponica and Populus X tomentiglandulosu has been tramped when the sample has 2~6 percent of moisture contents. Coniferous trees such as Pinus rigida and Larzx leptolepis do not burn easily while leaving charcoal. In contrast, deciduous trees with Zoysia japonzca and Populus X tomentiglandulosu are quick to catch fire. As a result of the experiments, it is proved that cigarette light is a very dangerous cause of wild fire especially for dry grass like Zoysia gaponica.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.315-315
• /
• 2017

In Japan, more than 80 % of soybean growing area is converted fields and excess water is one of the major problems in soybean production. For example, recent study (Yoshifuji et al., 2016) suggested that in the fields of shallow groundwater level (GWL) (< 1m depth), rising GWL even in a short period (e.g. 1 day) causes inhibition of soybean growth. Thus it becomes more and more important to predict GWL and soil moisture in detail. In addition to conventional surface drainage and underdrain, FOEAS (Farm Oriented Enhancing Aquatic System), which is expected to control GWL in fields adequately, has been developed recently. In this study we attempted to predict GWL and soil moisture condition at the converted field with FOEAS in Biwa lake reclamation area, Shiga prefecture, near the center of the main island of Japan. Two dimensional HYDRUS model (Simuinek et al., 1999) based on common Richards' equation, was used for the calculation of soil water movement. The calculation domain was considered to be 10 and 5 meter in horizontal and vertical direction, respectively, with two layers, i.e. 20cm-thick of plowed layer and underlying subsoil layer. The center of main underdrain (10 cm in diameter) was assumed to be 5 meter from the both ends of the domain and 10-60cm depth from the surface in accordance with the field experiment. The hydraulic parameters of the soil was estimated with the digital soil map in "Soil information web viewer" and Agricultural soil-profile physical properties database, Japan (SolphyJ) (Kato and Nishimura, 2016). Hourly rainfall depth and daily potential evapo-transpiration rate data were given as the upper boundary condition (B.C.). For the bottom B.C., constant upward flux, which meant the inflow flux to the field from outside, was given. Seepage face condition was employed for the surrounding of the underdrain. Initial condition was employed as GWL=60cm. Then we compared the simulated and observed results of volumetric water content at depth of 15cm and GWL. While the model described the variation of GWL well, it tended to overestimate the soil moisture through the growing period. Judging from the field condition, and observed data of soil moisture and GWL, consideration of soil structure (e.g. cracks and clods) in determination of soil hydraulic parameters at the plowed layer may improve the simulation results of soil moisture.

• The Journal of Engineering Geology
• /
• v.17 no.2 s.52
• /
• pp.279-287
• /
• 2007

An ore of stone obtained from quarry lose its about 60% such as the muck and the stone-dust during the process of making the architectural block, the crushed aggregate and so on. A part of the muck is only reutilized for the crushed aggregate as road pavement materials, while the most of the muck in the shape of powder is mixed with water and then it is deposited in a sludge tank. The muck in the shape of powder is called the stone-dust. If the stone-dust is discharged and sprayed, an ecosystem will have terrible damage because the seepage of surface water, the flow of ground water and the movement of air are not occurred smoothly by packing the void of soils. As the Waste Management Law (2003) in Korea, the stone-dust is sorted out the industrial waste and the most of that is dumped in ground. Therefore, the establishments of an efficient recycling plan are necessary through the improvement of engineering properties of the stone-dust. To investigate the possibility of recycle and improvement for the stone-dust, the stone-dust and natural soils are sampled from six quarries in Korea. The various soil tests are performed by use of the mixed soils with the stone-dust content ratio. As the result of various soil tests, the recycle possibility of the stone-dust is analyzed as subbase layer materials of the roads.

• 한국해양학회지
• /
• v.24 no.1
• /
• pp.52-61
• /
• 1989

The daily net primary production by phytoplankton and ammonium excretion by macrozooplankton (> $350{\mu}m$) were measured to understand the nitrogenous nutrient dynamics in the southern part of the East Sea of Korea. At most of the staions, water columns were well stratified and strongly developed pycnoclines and matching nutriclines could be found near the 20-60m. Total chlorophyll ranged between $1.22-3.24{\mu}g$ ChI/l and nano-fractions of chlorophyll ranged from 43.2 to 99.6% in the surface layer. The daily net primary production by phytoplankton ranged from 0.75 to 2.04 gC/$m^2$/d and averaged to be 1.5 gC/$m^2$/d. 1t is evidenced that the primary production and chlorophyll content are relatively high in frontal waters where the North Korean Cold Water meets with the East Korean Warm Water. The turnover time of nitrate in the euphotic zone ranged from 0.2 day to 1.6 day and averaged to be 0.8 day. The N:P ratio of the study area shows on the average 13.4 which indicates nitrogenous nutrient to be the limiting factor for phytoplankton growth. Ammonium excretion by macrowoplankton averaged out to 1.3mg at-N/$m^2$/d, and contributed 7.3% of daily total nitrogen requirement by phytoplankton in this area. Calculation of upward flux of nitrate to the surface mixed layer from the lower layer approximates 7% of nitrogen requirement by phytoplankton.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.5
• /
• pp.91-97
• /
• 2015

Papermakers wish to increase the filler content of printing and writing grades because it allows saving in production cost through fiber replacement and improving the formation, and optical and printing properties of the paper. However, high filler loading in the base paper has negative side effects. It reduces the mechanical properties of paper and induces cracking at the fold after coating process. Fold cracking is one of the most frequent quality complaints for magazines, high quality books, etc. Two approaches were examined as methods to reduce fold cracking. One approach was to use preflocculated fillers, which was expected to reduce the fold cracking because it would decrease the interfiber bonding. The other approach was to use a new coating binder that gives greater binding power and thereby provides an opportunity of reducing the fold cracking of coated paper. When filler preflocculation was employed in producing the base paper, fold cracking becomes more severe than conventional filler loading condition. On the other hand, use of nano sized binder in coating improved the tensile properties of the coating layer and thereby decreased the crack area. It was shown that tensile properties of coating layer played an important role in fold cracking of coating.