• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.4
• /
• pp.142-151
• /
• 1999

Linear Pulse Motors (LPM) are used a field where SImOth linear motion is required, and it's position accuracy higher than that of a lead According to the advanUlge such as simplicity of rrechanical frarre, high reliability, precise open-loop operation, low inertia etc. LPM is awlied largely where it have made motor of this kind more and rmre attractive in many application areas such as factory automation and high speed positioning. This paper is researched to analyze for force characteristics of hybrid LPM with high accuracy and repeatability. Both the thrust and normal force are very sensitive to the airgap and tooth pitches of the forcer and platen. Here, the thrust shows a high content while the normal force is much higher than the thrust. For magnetic circuits of hybrid LPM is the complicated structure, the finite element rrethod (FEM) is employed with suitable rrethod for calculating the force. Therefore, both the virtual work principle and maxwell stress tensor have been used.n used.

• Analytical Science and Technology
• /
• v.17 no.2
• /
• pp.91-97
• /
• 2004

Cryptand ion exchange resins were synthesized with 1-aza-15-crown-5 macrocyclic ligand attached to styrene divinylbenzene (DVB) copolymer with crosslink of 1%, 2%, 5% and 10% by substitution reaction. The synthesis of these resins was confirmed by content of chlorine, element analysis, and IR-spectrum. The effects of pH, time, dielectric constant of solvent and crosslink on adsorption of uranium ($UO{_2}^{2+}$) ion were investigated. The uranium ion was showed fast adsorption on the resins above pH 3. The optimum equilibrium time for adsorption of metallic ions was about two hours. The adsorption selectivity determined in ethanol was in increasing order uranium ($UO{_2}^{2+}$), magnesium ($Mg^{2+}$), neodymium ($Nd^{3+}$) ion. The adsorption was in order of 1%, 2%, 5%, and 10% crosslink resin and adsorption of resin decreased in proportion to order of dielectric constant of solvents.

• Applied Chemistry for Engineering
• /
• v.19 no.3
• /
• pp.304-309
• /
• 2008

Cryptand series ion exchange resins were synthesized with 1-aza-12-crown-4 macrocyclic ligand attached to styrene (4 series dangerous matter) divinylbenzene (DVB) copolymer with crosslink of 1％, 2％, 4％ and 8％ by a substitution reaction. The synthesis of these resins was confirmed by content of chlorine, element analysis, electron micrograph, and IR-spectrum. The effects of pH, time, dielectric constant of solvent and crosslink on adsorption of uranium (${UO_2}^{2+}$) ion were investigated. The uranium ion showed a fast adsorption on the resins above pH 3. The optimum equilibrium time for adsorption of metallic ions was about two hours. The adsorption selectivity determined in ethanol was in increasing order uranium (${UO_2}^{2+}$) > nickel ($Ni^{2+}$) > gadolinium ($Gd^{3+}$) ion. The adsorption was in order of 1％, 2％, 4％, and 8％ crosslinked resin and adsorption of resin decreased in proportion to order of dielectric constant of solvents.

• Journal of Digital Convergence
• /
• v.17 no.11
• /
• pp.441-450
• /
• 2019

The research of this paper is aimed at finding out the meaning of the literary rhetoric technique of metaphor in film, and understanding the difference between metaphor and symbol. It is also worth reference to the study of metaphor in the future. This paper will read the related paper to organize the relevant concepts and look at the classical film repeatedly, and find the expression element of the metaphor in it. Finally, look at Truman Show and analyze it and find a conclusion. Through related research, we have found that metaphor in movies is always built together through various aspects of themes, titles, lines, and plays. It provides clues through the screen and induces the audience to think. Metaphor not only helps improve the movie's content, but it is also the most important feature in the movie to influence the audience and induce thinking.

• Journal of Convergence for Information Technology
• /
• v.11 no.10
• /
• pp.1-9
• /
• 2021

Although interest in the metaverse increases due to the pandemic, the understanding of the metaverse interest factor, which is an essential element for the sustainability of any metaverse platform, is lacking. This study aims to reveal the interest factors of metaverse services by analyzing user community discourse. We collected user community discourses from and applied LDA to extract topics. Further, we categorize the factors into growth and verifiable indicators, various levels of interaction, self-expression and freedom, and connection with the real world. The content planning direction of the game-based metaverse of utilization was derived. This study is meaningful in that it analyzes the interest factors of the metaverse based on the empirical evidence of user discourse data.

• Journal of Digital Convergence
• /
• v.16 no.12
• /
• pp.619-624
• /
• 2018

The purpose of this study was to examine the trend of men's gymnastics on floor exercise final(8 gymnasts) in the 2018 Asian Games through digital video materials. Video recordings of floor exercise final were collected from the 2018 Asian Games. The cross-check with three international gymnastics judges on floor exercise final was analyzed. To fulfil the D-score, 8 gymnasts were the most performed backward saltos elements group(36 elements), forward salto with 1/1 turn(8 gymnasts), backward salto with 5/2 turn(8 gymnasts) and backward salto with 3/1 turn(8 gymnasts). The scores showd average the D score 6.0, E score 7.9, and connection values 0.25. To get a good results on floor exercise, gymnasts need to get a average the D score over 6.0, E score over 8.5, and connection values over 0.3.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.2
• /
• pp.45-50
• /
• 2021

As the difficulty of flip chip products increases, there is a growing interest in the material of flux, which is safe from the solder wetting and reliability. In the case of no clean flux, there is merit in terms of process efficiency because there is no cleaning process. But Cu migration and delamination can be occurred if the residue remains after the reflow process. In this study, major element materials, solvent and activator, are changed and confirmed effect of non-wet and reliability in the package environment. Stability of materials were secured through storage stability evaluation, and we found out non-wet zero materials through the application of two types of solvent and activator with different boiling point and the increase of activator content. After reliability test, no delamination was found in the plane analysis, which secured the final composition of low residue flux.

• Applied Chemistry for Engineering
• /
• v.22 no.6
• /
• pp.697-702
• /
• 2011

Ion exchange resins have been synthesized from chloromethylated styrene-1,4-divinylbenzene (DVB) with 1%, 2%, 5% and 15%-crosslinkage and macrocyclic ligand of $OenNdien-H_4$ by copolymerization. The adsorption characteristics of uranium (${UO_2}^{2+}$), potassium ($K^+$) and neodymium ($Nd^{3+}$) metallic ions have been investigated. The synthesis of these resins was confirmed by content of chlorine, element analysis, and IR-spectrum. The effects of pH, time, and crosslinkage on adsorption of metallic ions were also studied. The uranium ion showed the fast adsorption on the resins above pH 3. The optimum equilibrium time for the adsorption of metallic ions was about two hours. The adsorption selectivity determined in methanol solution was in increasing order uranium (${UO_2}^{2+}$) > potassium ($K^+$) > neodymium ($Nd^{3+}$) ion. Moreover, the adsorption was increased with the crosslinkage concentration in order of 1%, 2%, 5% and 15%-crosslinkage resin.

• Journal of Powder Materials
• /
• v.29 no.3
• /
• pp.219-225
• /
• 2022

An alternative fabrication method for carburizing steel using spark plasma sintering (SPS) is investigated. The sintered carburized sample, which exhibits surface modification effects such as carburizing, sintered Fe, and sintered Fe-0.8 wt.%C alloys, is fabricated using SPS. X-ray diffraction and micro Vickers tests are employed to confirm the phase and properties. Finite element analysis is performed to evaluate the change in hardness and analyze the carbon content and residual stress of the carburized sample. The change in the hardness of the carburized sample has the same tendency to predict hardness. The difference in hardness between the carburized sample and the predicted value is also discussed. The carburized sample exhibits a compressive residual stress at the surface. These results indicate that the carburized sample experiences a surface modification effect without carburization. Field emission scanning electron microscopy is employed to verify the change in phase. A novel fabrication method for altering the carburization is successfully proposed. We expect this fabrication method to solve the problems associated with carburization.

• The Journal of the Korea Contents Association
• /
• v.22 no.9
• /
• pp.497-509
• /
• 2022

Lines are the oldest visual elements in human history and are closely related to human life and drawings and symbols drawn with lines on cave paintings and rocks have existed as alternative images for human survival. In arts the line reveals the core of the object within a short period of time and in art therapy it becomes a medium that can diagnose the client's psychological state and intervene therapeutically. However although line drawing has therapeutic importance in the process as well as diagnosis studies on its effectiveness and therapeutic characteristic have not been actively conducted. Therefore in this study the characteristics related to line art in art therapy are first derived through 'Triangular Verification of Theory', 'Qualitative Content Analysis', and 'Finding Common Parts' in domestic and foreign literature. As a result I will examine the Movement which is a key therapeutic element of line drawing in connection with the brain structure. Through this I will examine the therapeutic mechanisms that affect the body, brain and mind of the movement of line drawing and examine and suggest how it can be used in art therapy.