• International Journal of Highway Engineering
• /
• v.17 no.3
• /
• pp.27-33
• /
• 2015

PURPOSES : To ensure appropriate RCC properties with sufficient strength development and workability, it is necessary to secure a proper level of consistency. It is also necessary to secure maximum dry density, which is an important factor for increasing the interaction of aggregate interlocking, leading to an augmentation of RCC strength. On the other hand, the dry density of RCC can be changed owing to the compaction conditions, water content, and particle size distribution. A Proctor test and a modified Proctor test were used for determining the optimum water content needed to achieve maximum dry density with different amounts of compaction energy. A Vebe test, on the other hand, was used for checking the level of consistency, which is important for producing a workable mixture. METHODS : To confirm the degree of compaction at various particle sizes, RCC mixtures with different sand/aggregate ratios were evaluated. The Proctor test and modified Proctor test were applied to these mixtures to check the effect of the aggregate gradation and compaction energy on the maximum dry density and optimum water content. During each test, three specimens were produced for all types of water content under each aggregate gradation. A compaction curve and the optimum water content and maximum dry density for each aggregate gradation were then obtained for both tests. The range of water content for the appropriate consistency of each aggregate gradation was determined through a Vebe test. The optimum water content was then evaluated based on this range. RESULTS : The compaction test results show that the modified Proctor test provides a higher maximum dry density and lower optimum water content compared with the standard Proctor test. For the modified Proctor test, two cases of aggregate gradation (s/a = 30% and 70%) had the optimum water contents outside of the appropriate water content range. For the standard Proctor test, on the other hand, none of aggregate gradations provided the optimum water content within the desired range. CONCLUSIONS : The modified Proctor test should be used for an RCC mixture design because it can provide adequacy between maximum dry density and consistency. Moreover, the compaction roller has become highly developed for higher compaction energy.

• Journal of Advanced Navigation Technology
• /
• v.24 no.3
• /
• pp.238-244
• /
• 2020

The development and distribution rate of smartphones have progressed so rapidly that it is safe for the entire nation to use them in the smart age, and the use of smartphones has become an essential medium for the use of domestic media content, and many people are using various contents regardless of gender, age, or region. Recently, various media outlets have been consuming video content for online learning, indicating that learners utilize video content online for learning. In the previous research, satisfaction studies were conducted according to the type of content, and the improvement plan was necessary because no research was conducted on how to evaluate the learning content itself and provide it to learners. In this paper, we would like to propose a system through evaluation and review of learning content itself as a way to improve the way of providing video content for learning and quality learning content.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.25 no.4
• /
• pp.839-847
• /
• 2015

To seamlessly provide content through the Internet, it is generally considered to use distributed processing for content requests converged on original content providers like P2P, CDN, and ICN. That is, after other nodes temporally save content, they handle content requests instead of original content providers. However, in this case, it may be possible that a content sender is different from the original provider of the content. In this case, users may be exposed to various risks. To solve such a problem, it is highly recommended to verify received contents before using them, but it can cause network traffic increases as well as a serious service delay. This paper proposes an efficient content verification scheme for distributed networking/data store environments and analyzes its performance.

• Journal of Korean Library and Information Science Society
• /
• v.54 no.4
• /
• pp.255-279
• /
• 2023

The purpose of this study is to derive implications through a comparison of the current status of catalog enriched content services provision in U.S. public libraries and domestic public libraries. In addition, we are seeking ways to improve the catalog enriched content services for domestic public libraries in the future. From early September to mid-October 2023, specific books were searched on public library websites in the U.S. and Korea, and the functions of the enriched content services shown in the search results were compared. The results are as follows: First, domestic public library enriched content services require a separate company to develop and provide an enriched content services solution. Second, the enriched content services platform must discover domestic information sources that can be utilized in the areas of book-centered, book recommendation, and community engagement. Third, it is necessary to develop enriched content using public data such as the Library Information Naru. Fourth, each integrated library must that data generated from local community engagement services can be utilized as an enriced content service.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.6
• /
• pp.502-505
• /
• 2005

According to use of a multimedia content being increased in an e-learning, a size deviation of a content to provide in an e-teaming system is increased. It is becoming a factor to drop efficiency of education because this makes a deviation of response time on an e-learning user. Therefore, studies about a deviation improvement of user response speed is necessary in the e-learning system that used a multimedia content. In this study, we designe the hybrid e-teaming system that used multi-layed structire. A proposed system is based on a characteristics of media and size of a content that a multimedia data had. Also, it proved superiority of performance through experimentation.

• Journal of Animal Science and Technology
• /
• v.57 no.11
• /
• pp.34.1-34.5
• /
• 2015

Himalayan dock (Rumex nepalensis) was evaluated for forage value and antinutrients under three, five and seven weeks cutting intervals in the temperate environment. Dry matter (DM) content was measured for each cutting interval. Forage quality parameters such as Crude Protein (CP), Acid Detergent fiber (ADF), Neutral Detergent Fiber (NDF), Calcium (Ca) and Phosphorus (P) were analyzed. Plants with seven weeks cutting interval gave higher DM yield. CP and P content were significantly higher for three weeks cutting intervals. Average CP contents were 31.38 %, 30.73 % and 27.32 % and average P content 0.58 %, 0.52 % and 0.51 % for three, five and seven weeks cutting intervals, respectively. Ca content did not differ significantly between cutting intervals. The average Ca content were 0.91 %, 0.90 % and 90 %, for three, five and seven weeks cutting intervals, respectively. Tannin and mimosine contents were not significantly different between cutting intervals. Average tannin contents were 1.32 %, 1.27 % and 1.26 % and mimosine 0.38 %, 0.30 % and 0.28 % for three, five and seven weeks cutting intervals, respectively. The study concluded that R. nepalensis could be a potential source of protein for livestock. The study also suggests seven weeks harvesting interval to provide plants with high dry matter yield, high forage quality and very low levels of anti-nutrients.

• Journal of the Korean Society for information Management
• /
• v.31 no.3
• /
• pp.313-329
• /
• 2014

This study aims to provide intellectual access to TV content using faceted classification. In order to describe the content of news and current affairs programs, a faceted approach was explored. Based on the Ranganathan's PMEST formula, the basic facets - 'who', 'what', 'how', 'where', 'when' - and their sub-facets were created, specifically for describing the news genre. Additionally, the formal structure and the contextual features of the news genre were mainly considered for creating sub-facets. These created facets were applied to a news genre program. The result shows that these suggested facets are useful for representing well the contextual components of the news genre. The application of faceted classification is expected to improve the identification of the specific TV content.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.518-520
• /
• 2006

Due to the rapid popularization of mobile multimedia devices and the Internet as well as the realization of high-speed data transmission and large-volume data recording media, high quality content distribution and ubiquitous information services are making progress and a new type of information distribution and network sharing service has gradually emerged into the market. It is capable of utilizing terabyte sized home servers also in private homes. Under these circumstances, in distribution of content over shared networks, it is crucial to establish DRM (Digital Rights Management) technologies to protect the content from illegal copying and usage. A truly successful DRM system must be built on open worldwide specifications and provide maximum interoperability and user acceptance. An open interoperability of DRM is able to construct highly expandable PKI based DRM, targeting usage between systems, considering the expansion of recent content distribution services and clients This document gives protocol specifications for the exchange of rights information between the DRM module, description of specifications for rights information and encrypted content formats.

• Child Health Nursing Research
• /
• v.14 no.2
• /
• pp.163-175
• /
• 2008

Purpose: The purpose of this study was to provide basic data to develop first aid education programs for elementary, middle and high school students. Method: Forty nine textbooks adopted by first to six grade elementary schools and first to third grade of both middle and high schools were analyzed for content on first aid. Results: 1) First aid content was covered only in courses on and 2) Content on first aid was included in the categories, "General of first aid", "Rescue & moving", "Fire & Burns", "Cardiopulmonary resuscitation", "Musculoskeletal injuries", "Thermal injuries", "Wounds", "Removing foreign bodies", "Disaster & Accidents" and "Others". Categories that were not included were "Poisoning" and "Bites". The content did not follow a progression related to the level of intellectual and physical development of the students. Conclusion: These results suggest that the content on first aid should be revised to be practical and rational for the benefits of student safety.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1108-1109
• /
• 2008

To survive in outdoor environments, photovoltaic modules rely on packaging materials to provide requisite durability. We analyzed the properties of encapsulant materials that are important for photovoltaic module packaging. Recently, the thickness of solar cell gets thinner to reduce the quantity of silicon. And the reduced thickness make it easy to be broken while PV module fabrication process. Solar cell's micro cracks are increasing the breakage risk over the whole value chain from the wafer to the finished module, because the wafer or cell is exposed to tensile stress during handling and processing. This phenomenon might make PV module's maximum power and durability down. So, when using thin solar cell for PV module fabrication, it is needed to optimize the material and fabrication condition which is quite different from normal thick solar cell process. Normally, gel-content of EVA sheet should be higher than 80% so PV module has long term durability. But high gel-content characteristic might cause micro-crack on solar cell. In this experiment, we fabricated several specimen by varying curing temperature and time condition. And from the gel-content measurement, we figure the best fabrication condition. Also we examine the crack generation phenomenon during experiment.