• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.707-709
• /
• 2014

The radiation sources leaked from large-scale radiation leak accident like the Fukushima nuclear power plant accident or nuclear explosions can cause to the very large damage for us. So that the damage can be minimized, we have being developed a detector that can providing information about the location of the source to remove dangerous substances quickly than the conventional single detector. In this paper, we designed and implemented the radiation shield and the collimator for the development of the stereo radiation detector to detect contamination things using MCNP Simulation. And we analysed the test results of the radiation shield and collimator using the radiation source. The results of this paper will be used as the basis for improving the efficiency of the stereo radiation detector being studied currently.

• Analytical Science and Technology
• /
• v.33 no.6
• /
• pp.245-251
• /
• 2020

Lead (Pb) has been shown to be a useful tracer of contamination sources and geochemical processes such as age dating and crustal evolution. These studies require a chromatographic technique for Pb separation from geological samples. This paper presents a comparison study on the effect of eluent concentration between 6M HCl and 8M HCl on the separation of Pb from Pb resin. The results showed that the separation of Pb using 6M HCl as the eluent was not effective compared to the separation using 8M HCl. To verify this method, we measured the Pb isotopic compositions of the Pb isotopic standard (NIST NBS981) and geological reference materials (BCR-2, GSP-2, and JG-1a) using a thermal ionization mass spectrometer (TIMS). The results correspond well with the reported values within the error range, implying that this method can be useful.

• Nuclear Engineering and Technology
• /
• v.54 no.8
• /
• pp.2792-2800
• /
• 2022

In the core of the WWR-K reactor, a long-term irradiation of tristructural isotopic (TRISO)-coated fuel particles (CFPs) with a UO₂ kernel was carried out under high-temperature gas-cooled reactor (HTGR)-like operating conditions. The temperature of this TRISO fuel during irradiation varied in the range of 950-1100 ℃. A fission per initial metal atom (FIMA) of uranium burnup of 9.9% was reached. The release of gaseous fission products was measured in-pile. The release-to-birth ratio (R/B) for the fission product isotopes was calculated. Aspects of fuel safety while achieving deep fuel burnup are important and relevant, including maintaining the integrity of the fuel coatings. The main mechanisms of fuel failure are kernel migration, silicon carbide corrosion by palladium, and gas pressure increase inside the CFP. The formation of gaseous fission products and carbon monoxide leads to an increase in the internal pressure in the CFP, which is a dominant failure mechanism of the coatings under this level of burnup. Irradiated fuel compacts were subjected to electric dissociation to isolate the CFPs from the fuel compacts. In addition, nondestructive methods, such as X-ray radiography and gamma spectrometry, were used. The predicted R/B ratio was evaluated using the fission gas release model developed in the high-temperature test reactor (HTTR) project. In the model, both the through-coatings of failed CFPs and as-fabricated uranium contamination were assumed to be sources of the fission gas. The obtained R/B ratio for gaseous fission products allows the finalization and validation of the model for the release of fission products from the CFPs and fuel compacts. The success of the integrity of TRISO fuel irradiated at approximately 9.9% FIMA was demonstrated. A low fuel failure fraction and R/B ratios indicated good performance and reliability of the studied TRISO fuel.

• Journal of Soil and Groundwater Environment
• /
• v.27 no.2
• /
• pp.61-75
• /
• 2022

This study evaluated the potential threat of agricultural and human activities to groundwater in the Noseong stream watershed, a typical agricultural area, through hydrogeochemical characteristics and microbial community analyses. The groundwater in the study area was Ca-SO₄ and Ca-HCO₃ types alluvial aquifer mainly used for agricultural and living purposes, and contained high levels of NO₃^- and Cl^- ions generated from anthropogenic sources such as fertilizer, livestock wastewater, and domestic sewage. Proteobacteria was most abundant in all samples with an average of 46.1% while Actinobacteria, Bacteroidetes, and Cyanobacteria were dominant on an occasional basis. The prevalence of aerobic bacteria such as the genus Mycobacterium, Flavobacterium, and Sphingomonas suggests that groundwater was well connected with the surface layer. The potential pathogen Mycobacterium was detected in most samples, and other pathogenic bacteria were also widely distributed, indicating the vulnerability to contamination. Therefore, an integrated management system is required to secure the sustainable use of groundwater in agricultural areas with high groundwater dependence.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.2
• /
• pp.65.2-66
• /
• 2021

Observational studies of supernova (SN) feedback are limited. In our galaxy, most supernova remnants (SNRs) are located in the Galactic plane, so there is contamination from foreground/background sources. SNRs located in other galaxies are too far, so we cannot study them in detail. The Large Magellanic Cloud (LMC) is a unique place to study the SN feedback due to their proximity, which makes possible to study the structure of individual SNRs in some detail together with their environment. Recently, we carried out a systematic study of 13 LMC SNRs using [P II] (1.189 ㎛) and [Fe II] (1.257 ㎛) narrowband imaging with SIRIUS/IRSF, four SNRs (SN 1987A, N158A, N157B and N206), show [P II]/[Fe II] ratio much higher than the cosmic abundance. While the high ratio of SN 1987A could be due to enhanced abundance in SN ejecta, we do not have a clear explanation for the other cases. We investigate the [P II] knots found in SNRs N206, N157B and N158A, using optical spectra obtained last November with GMOS-S mounted on Gemini-South telescope. We detected several emission lines (e.g., H I, [O I], He I, [O III], [N II] and [S II]) that are present in all three SNRs, among other lines that are only found in some of them (e.g., [Ne III], [Fe III] and [Fe II]). Various line ratios are measured from the three SNRs, which indicate that the ratios of N157B tend to differ from those of other two SNRs. We will use the abundances of He and N (from the detection of [N II] and He I emission lines), together with velocity measurements to tell whether the origin of the [P II] knots are SN ejecta or CSM/ISM. For this purpose we have built a family of radiative shock with self-consistent pre-ionization using MAPPINGS 5.1.18, with shock velocities in the range of 100 to 475 km/s. We will compare the observed and modeled line fluxes for different depletion factors.

• Korean Journal of Environmental Agriculture
• /
• v.41 no.4
• /
• pp.223-229
• /
• 2022

BACKGROUND: Mining activities, smelter discharges, and sludges are the major sources of heavy metal contamination to soils. The objective of this study was to determine the efficiency of magnetite and bottom ash derived from coal ash in remediating As-contaminated soil. METHODS AND RESULTS: An incubation experiment was conducted for 10 weeks. Magnetite and bottom ash at different rates and ratios were applied to each plastic bottle repacked with 1,000 g of dried As-contaminated soil. After 3-weeks of incubation, the concentrations of available As were measured by using Mehlich-3, SBET, and sequential extraction methods. All of the subjected soil amendments resulted in significant decreases in available As concentration compared to the controls. The addition of magnetite at the highest rate was the best to stabilize As in the soils; however, the values of As concentration varied with the extraction methods. CONCLUSION(S): To ensure the stabilization accuracy of heavy metals in soil, both single and sequential extractions are recommended. The magnetite derived from fly coal ash can also be applicable as a heavy metal stabilizer for the As-contaminated soil.

• Journal of The Geomorphological Association of Korea
• /
• v.28 no.4
• /
• pp.15-30
• /
• 2021

This study analyzed the changes in land-cover and sedimentary environment before and after flooding through drone images and sediment analysis for the Seomjin River Chimsil Wetland. The results showed that the area of some land-covers such as sand bar, grass, and trees were continuously changed. The acidity level of the sediments in the Seomjin River Chimsil Wetland was weakened gradually by flooding and EC was also decreased. The levels of organic matter, effective phosphoric acid, and CEC, however, were fluctuating depending on branches, which seems to be the result of landization as new sedimentary environment was developed and vegetation was settled after the flood. Average mean size of river sediments was found to be fine sand, and it exhibited various particle size characteristics from granule to medium silt depending on the location. As the sedimentary environment changed due to the effects of floods and typhoons, the particles were granulated or grain refined depending on the position. In the Seomjin River Chimsil Wetland, there were factors that could interfere with geomorphic development and sedimentary environment, contamination sources in and around the wetland, and natural threat factors. Therefore, in this study, a conservation and management plan was proposed to remove these threat factors and to preserve the scarcity, naturalness, and dynamics of Seomjin River Chimsil Wetland.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.18 no.1
• /
• pp.46-63
• /
• 2024

One of the biggest dangers in the globe is water contamination. Water is a necessity for human survival. In most cities, the digging of borewells is restricted. In some cities, the borewell is allowed for only drinking water. Hence, the scarcity of drinking water is a vital issue for industries and villas. Most of the water sources in and around the cities are also polluted, and it will cause significant health issues. Real-time quality observation is necessary to guarantee a secure supply of drinking water. We offer a model of a low-cost system of monitoring real-time water quality using IoT to address this issue. The potential for supporting the real world has expanded with the introduction of IoT and other sensors. Multiple sensors make up the suggested system, which is utilized to identify the physical and chemical features of the water. Various sensors can measure the parameters such as temperature, pH, and turbidity. The core controller can process the values measured by sensors. An Arduino model is implemented in the core controller. The sensor data is forwarded to the cloud database using a WI-FI setup. The observed data will be transferred and stored in a cloud-based database for further processing. It wasn't easy to analyze the water quality every time. Hence, an Optimized Neural Network-based automation system identifies water quality from remote locations. The performance of the feed-forward neural network classifier is further enhanced with a hybrid GA- PSO algorithm. The optimized neural network outperforms water quality prediction applications and yields 91% accuracy. The accuracy of the developed model is increased by 20% because of optimizing network parameters compared to the traditional feed-forward neural network. Significant improvement in precision and recall is also evidenced in the proposed work.

• Journal of Korean Society on Water Environment
• /
• v.40 no.4
• /
• pp.161-167
• /
• 2024

The demand for bottled water in South Korea is steadily increasing, but there are challenges regarding water sources and violations of water quality standards. Consumers struggle to identify products that do not meet these standards, highlighting the need for improved water management. This study aims to investigate the use of flow cytometry to identify microbial behavior in bottled water. Twelve different bottled water brands were selected for this study. A novel non-culture-based analysis method called total cell count via flow cytometry was utilized, which is not commonly used to assess drinking water quality. This method was compared to conventional culture-based methods for heterotrophic plate count and E. coli experiments, in order to introduce new indicators for hygiene management. Adenosine triphosphate analysis was also conducted to assess cell activity, and total organic carbon was measured to determine the presence of organic matter. The total cell counts varied among the different bottled water brands. The adenosine triphosphate levels ranged from 37.1ng/L to 221.7ng/L, while the total organic carbon ranged from 0.4 to 0.6 mg/L. Furthermore, E. coli was not detected in any of the bottled waters, and with the exception of two cases, the levels of heterotrophic bacteria did not exceed the drinking water standard of 100 CFU/mL. This study demonstrated a correlation between total cell count and heterotrophic plate count, suggesting that non-culture-based analysis could be valuable in promptly assessing microbial contamination, in contrast to the conventional methods that require approximately 48 hours for incubation.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.7
• /
• pp.656-664
• /
• 2010

We investigated the levels and distribution patterns of 16 priority polycyclic aromatic hydrocarbons (PAHs), 12 Coplanar polychlorinated biphenyls (Co-PCBs) and organochlorine pesticides (OCPs) in the surface sediments from the Nakdong river basin, Korea. The levels of 16 PAHs and 12 Co-PCBs in the river sediment samples ranged from not detected (N.D.)~969.3 ng/g-dry, 4.2~7716.5 pg/g-dry (0.0~10.1 pg-TEQ/g-dry), respectively. Also, the levels of 16 PAHs were from 5.8~2987.2 ng/g-dry and 4.3~461.1 pg/g-dry (0.0~0.6 pg-TEQ/g-dry) for 12 Co-PCBs in the lake sediment samples. Only dichloro-diphenyl-trichloroethane (DDT) were detected among target OCPs and the concentration ranged from N.D.~1.5 ng/g-dry in the river sediment samples. These contamination levels were far below the guideline values suggested for environmental quality assessment. Low molecular weight PAHs were dominant in the river sediment samples, while middle and high molecular weight PAHs were dominant among 16 PAHs in the lake sediment samples. PCB-118 and PCB-105 were predominant congeners in the sediment, which were similar to the results obtained from previous studies. With these results, the assessment of potential sources of PAHs and Co-PCBs contamination in the sediments of the Nakdong river basin was performed. The pyrogenic-PAHs originated from combustion of fossil fuel and biomass were related with the PAHs contribution in most of the sediment samples, and Co-PCBs in the sediment samples were related with commercial PCB products.