• Journal of Food Hygiene and Safety
• /
• v.29 no.4
• /
• pp.278-284
• /
• 2014

To investigate the prevalence of Staphylococcus aureus (S. aureus) during production of perilla leaves, a total of 261 samples, including water, soil, surroundings of cultivation and packing, workers, and perilla leaves, was examined.. To trace the contamination sources of S. aureus related to perilla leaves, MLVA (Multi-Locous Variable number of tandem repeat Analysis), which is a very efficient method to discriminate strains with minimum molecular biology equipment was applied to S. aureus isolated from perilla leaves farms. S. aureus was isolated in perilla leaves from 9 of 38 farms at 0-2.92 log CFU/g. S. aureus was also found in working environment, including packing vinyl, worker clothes, irrigation water and hands. The patterns of MLVA of isolates from perilla leaves matched with those of isolates from packing table, irrigation water, packing vinyl, and hands. The isolates were successfully examined and determined by MLVA, thus elucidating S. aureus source and spread.

• Journal of Soil and Groundwater Environment
• /
• v.27 no.2
• /
• pp.50-60
• /
• 2022

The concentration levels and distribution characteristics of 16 polycyclic aromatic hydrocarbons (PAHs) were investigated and evaluated for total 100 soil samples as a part of the survey on soil contamination in Gwangju. The results (median and range) of T-PAHs (sum of 16 PAH concentrations), C-PAHs (sum of carcinogenic PAH concentrations) and T-TEQs (sum of 16 TEQ concentrations) were 20.8 (7.6~1158.1), 2.2 (N.D~509.6), and 0.3 (N.D~424.6) ㎍/kg, respectively. There was a positive correlation between C-PAHs/T-PAHs and T-TEQs/T-PAHs except one point where the concentration of benzo(a)pyrene was high. The ratios of the C-PAHs/T-PAHs were 31.7% for low molecular weight-PAHs and 68.3% for high molecular weight-PAHs, suggesting that PAHs generation mainly arose from combustion sources. The ratio of isomers of individual PAHs, Phe/Ant, Flu/Pyr, Ant/(Ant+Phe), Flu/(Flu+Pyr), and BaA/(BaA+Chr), also confirmed the predominance of PAHs from combustion activities. Statistical tracing of the source of PAHs through principal component analysis indicated that the main sources of combustion were automobile fuel and coal. The overall results of this study suggested HMW-PAHs, T-PAHs, C-PAHs and T-TEQs should be separately evaluated to better assess the toxicity and environmental behavior of individual PAHs.

• The Journal of Engineering Geology
• /
• v.10 no.3
• /
• pp.247-261
• /
• 2000

The geostatistical analyses for the chemical components of pH, TS, KMnO4 Demand, Cl, SO$_4$ and NO$_3$-N are carried out to understand the groundwater contamination in Pusan. The average values of each component are 7.2 for pH, 336.4mg/$\ell$ for TS, 2.3mg/$\ell$ for KMnO$_4$ Demand, 44.3mg/$\ell$ for Cl, 36.0mg/$\ell$ for SO$_4$, and 4.6mg/$\ell$ for NO$_3$-N. The ratios over the drinking standard of each component are 0.34% for pH, 2.27% for TS, 1.55% for KMnO$_4$ Demand, 1.59% for Cl, 0.57% for SO$_4$, and 3.7% for NO$_3$-N. The highest ratio of NO$_3$-N results from the municipal sewage and exhaust gas of vehicles. The isopleth maps of 6 chemical components show that the high values of groundwater contamination come from the inland of Pusan, and that some high values appear at the coastal area. The isopleth maps of Cl and SO$_4$ related with seawater intrusion also show that the high values appear only at the particular coastal area, not at the whole area. On the isopleth maps of Cl and SO$_4$, the anomalies of the concentration contours were compared with the directions of two large fault zones, the Ilkwang Fault and the Dongrae Fault. Apparently, they don't have the particular correlation. Therefore, it is concluded that the main source of groundwater contamination in Pusan is not the seawater, but the municipal sewage and other sources such as the exhaust gas of vehicles, the contaminated surface water, the waste water of factories, and the leachate of waste landfills.

• Korean Journal of Soil Science and Fertilizer
• /
• v.46 no.6
• /
• pp.615-622
• /
• 2013

The purpose of this study was to evaluate microbial contamination of melons in Korea. A total of 123 samples including melon fruits, leaves, seeds, soils, and irrigation water were collected from farms and markets to detect total aerobic bacteria, coliform, Escherichia coli, and pathogenic bacteria such as Bacillus cereus, Listeria monocytogenes, Salmonella spp., and Staphylococcus aureus. Samples were collected from Iksan and Nonsan farms to monitor bacterial levels on pre-market melons. The total aerobic and coliform bacteria on melon cultivation were between 0.43 and 6.65 log CFU $g^{-1}$, and 0.67 and 2.91 log CFU $g^{-1}$, respectively. Bacillus cereus, a fecal coliform, was detected in soils and melon leaves from Iksan farm at 2.95, 0.73 log CFU $g^{-1}$, respectively, and in soils from Nonsan farm at 3.16 log CFU $g^{-1}$. Market melon samples were collected to assay bacterial load on melon being sold to consumers. The contamination levels of total aerobic bacteria in agricultural markets, big-box retailers, and traditional markets were 4.82, 3.94, 3.99 log CFU $g^{-1}$, respectively. The numbers of coliform in melon on the markets ranged from 0.09 to 0.49 log CFU $g^{-1}$. Listeria monocytogenes, Salmonella spp., and Staphylococcus aureus were not detected in any samples. The count of total aerobic bacteria on melon seeds ranged from 0.33 to 3.34 log CFU $g^{-1}$. This study found that irrigation water, soil, manure and various farm work activities including post-harvest processes were latent sources of microbial contamination. These results suggest that hygienic management and monitoring of soil, water, and agricultural material should be performed to reduce microbial contamination in melon production.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.45 no.6
• /
• pp.561-569
• /
• 2012

To evaluate the bacteriological water quality in Yongnam-Gwangdo, located in western Jinhae Bay, seawater samples were analyzed using sanitary indicator bacteria at 57 sampling stations. According to survey results from January 2007 to December 2009, the range of the geometric mean and the estimated 90th percentile for coliforms and fecal coliforms in the samples were <1.8-16.5 and 1.8-246.8 MPN/100 mL and <1.8-7.1 and 1.8-74.8 MPN/100 mL, respectively. The samples, including those taken from stations located in Wonmunman, Gwangdo, and Dangdong, showed high levels of microbial contamination caused by the climate and weather patterns in the marine environment. The bacteriological water quality in the area met Korean criteria for a designated shellfish growing area for export and National Shellfish Sanitation Program criteria for an approved shellfish growing area, except at station #49. A total of 24 direct pollution sources were discharged into the shellfish growing area. The radius of impact was calculated for each pollution source to assess the effect on the shellfish growing area. The calculated radius of impact for most of the pollution sources was below 300 m. However, the radius of impact for the combined pollution sources in Kyeonnaeryang was 93-1973 m. There were significant differences between the calculated closed sea area and actual monitoring results. The closed sea area values calculated from the fecal coliform load in drainage water tended to be higher than the actual monitoring results. Tidal currents and environmental factors such as salinity, water temperature, sunlight, and microbiological factors affect the survival of fecal indicator bacteria in seawater.

• KSBB Journal
• /
• v.7 no.2
• /
• pp.118-125
• /
• 1992

Most of cosmetics are emulsion-type products which contain the sources of nutrition, i.e., vegetable oil, mineral oil and carbohyrate etc.. These additives are usually very susceptible to the contamination by microorganisms. The purpose of this study is to obtain the data necessary not only to prevent dermalopathia occurred by microbials but also to maintain the quality. In this experiment we observed the growth of P.aeruginosa in the cosmetics with or without antiseptics so as to prevent contamination. During the contamination period, the phase became unstable and creaming phenomina was happened together with some discoloration and bad smell. The pH of cosmetic was decreased from 7.6 to 6.0 and the concentration was increased from 1.443 to 1.453 in terms of refractive index during 40 days incubation. By adding antiseptics to the cosmetics, the number of P. aeruginosa from the challenge test method were decreased from $10^8$ cell/ml to $5{\times}10^3$ cell/ml. For the antibacterial effect against P. aeruginosa, p-hydroxy benzoic acid propyl ester in phosphoric acid buffer solution showed the best result.

• Economic and Environmental Geology
• /
• v.38 no.2 s.171
• /
• pp.135-142
• /
• 2005

In order to investigate the contamination level and seasonal variation of heavy metals and evaluate the bioavailability of toxic elements, environmental geochemical survey was undertaken at the Dogok Au-Ag-Cu mine area. The main pollution sources in the area were suggested as tailings, mine waste materials and mine water. Elevated levels of $140{\cal}mg/{\cal}kg{\;}As,{\;}107{\cal}mg/{\cal}kg{\;}Cd,{\;} 3017{\cal}mg/{\cal}kg{\;}Cu,{\;}12926{\cal}mg/{\cal}kg{\;}Pb,{\;}9094{\cal}mg/{\cal}kg$ Zn(before rainy season) were found in mine tailings. Concentrations of heavy metals in farmland soils exceeded normal level in nature soil (Bowen, 1979). The highest level of heavy metals was found in water samples near the mine tailing dumps regarded as a main pollution source of toxic elements in the area. These concentrations decreased to downstream due to the effect of dilution. From the results of sequential extraction analyses for tailings and soils, non-residual forms of heavy metals were found, which indicate the contamination to be progressing by continuing weathering and oxidation. Cadmium and Zn would be of the highest mobility in all samples. The bioavailability of Cd, Cu, Zn and As using SBET analysis from paddy soils was $53.3{\%},{\;}46.5{\%},{\;}41.0{\%}$ and $37.0\%$, respectively. The farmland soil sample(S3) showed the highest total concentration and bioavailability of heavy metals.

• Journal of Food Hygiene and Safety
• /
• v.16 no.4
• /
• pp.324-332
• /
• 2001

Foods constitute a large portion of heavy metal exposure toward general population and attract a deep concern with respect to assuring human health. This study summarized published data in Korea on the content, and dietary intake of heavy metals and assessed their risk potential in comparison with foreign data. An analysis for the yearly fluctuation of metal contents including arsenic, cadmium, mercury and lead by flood group (marine fishes, coastal shellfishes, freshwater fishes, cereal grains) exhibited a decreasing trend from the 1970s to the 1990s. When compared with domestic standards of heavy metals, their mean contents were below the limit and their maximum values seldom exceeded the limit. The data on the dietary intake of heavy metals by Koreans showed a decreasing trend from the 1980s to the 1990s. The average intakes offs and Hg were 6∼8% and those of Cd and Pb were 50∼80% of PTWI(provisional tolerable weekly intake), all of which were below the tolerance. As the extreme intakes of these metals may exceed the PTWI, a careful assessment for them may be necessary. Dietary intakes of Cd, Hg and Pb by Koreans lie in the mid-level among countries cited in the GEMS/Food monitoring data. As fishery foods are suspecious of contamination with Hg, Cd and As, and floods in general are with Pb, it is necessary to establish legal limits for these metals and monitor any progress of their contamination. Furthermore, overall assessment of exposure to heavy metals from all sources including floods, air, drinking water and occupation should be made in order to confirm the dietary risk factors and to assure the safety of food resources.

• Journal of the Korean Society of Groundwater Environment
• /
• v.7 no.1
• /
• pp.55-58
• /
• 2000

Methyl tertiary butyl ether (MTBE) is a gasoline additive that boosts the oxygen content in fuel (an oxygenate), resulting in less air-polluting carbon monoxide being released from vehicle exhaust systems. Then, groundwater contamination problems have been developed in areas where the chemical is used. Common sources of water contamination by MTBE include leaking underground gasoline storage tanks and leaks and spills from above ground fuel storage tanks, etc.. Studies on the chemical and these problems are going on abroad vigorously. These studies should be performed in our country as well more actively. This paper reviews on articles on these studies and focuses on the identification of the chemical as a groundwater contamination source.

• Economic and Environmental Geology
• /
• v.38 no.3 s.172
• /
• pp.221-236
• /
• 2005

In order to investigate the contamination levels and dispersion patterns of heavy metals such as Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb and Zn by urbanization, soils beneath roadside-trees and leaves of Ginkgo biloba were collected from Seoul area during October to November in 2001. All tree leaves were grouped into washed and unwashed ones. The pH of most soil ranges from 6 to 9 indicating a weak acidic and alkaline. The element couples of Cd-Co, Cr-Ni and Zn-Cu-Pb have good correlation in soils, and contamination sources of Cd-Co, Cr-Ni and Zn-Cu-Pb could be similar. High correlation coefficients among Pb, Cu and Zn in G. biloba indicates that these elements show the similar behavior during the metabolism processes. From the results of pollution index calculation for soils, industrialized and heavy traffic area were severly polluted by heavy metals such as Cd, Cu, Pb and Zn. By the discriminant analysis, industrialized and heavy traffic areas are enriched in the order of Ni> Cr> Pb. Cadmium is useful to discriminate between industrialized and heavy traffic areas, Co and Pb are highly enhanced in heavy traffic area.