• Title/Summary/Keyword: Contamination loading

Search Result 52, Processing Time 0.02 seconds

Water Environment Characteristics and Efficient Basin Management of Song Stream (송천유역의 수질환경특성 및 효율적 유역관리)

  • 허인량;신용건;이건호;최지용;김영진;정의호;정명선
    • Journal of Environmental Health Sciences
    • /
    • v.27 no.2
    • /
    • pp.51-59
    • /
    • 2001
  • Song stream is located in the upstream of the Namhan River. Normal times, the stream flows down to the east sea through the drainage pipe but at rainy season, it flows to the Namhan River. There are large stock farm, leisure town and cultivated land in this basin. The pollutants from these contamination source cause eutrophication at lake Doam and deterioration of water quality in namdai stream. In this case, this study was carried out to evaluate water quality and environmental capacity as well as economical efficiency of each industry. The basin shape factor of subject stream was 0.315, slope is higher than usual basin. The BOD, T-N and T-P productive contamination loading from each contamination source was 2,690, 974 and 194 kg/day, respectively, and major contamination source was stock farm and cultivated land. Annual BOD, T-N, T-P distribution(median value) of Song stream showed 1.0~2.2 mg/L, 3.16~5.85 mg/L and 0.024~0.197 mg/L Doam lake showed 1.1~1.9, 2.51~3.89 and 0.042~0.114 mg/L, respectively. Being compared of water quality at main stream between past and present, it showed that the water quality has improved since last five years. BOD improvement rate was 8~50%. Run off loading of BOD, T-N, T-P was 366, 1129, 17.2 kg/day, and run off rate was 13.6%, 86.2%, 11.3% respectively. Finally, the result of productivity survey of each industry, leisure town, cultivated land and large stock farm was 118, 46, 50 billion won, per T-P 1kg productive, and productivity portion was 100, 39, 42% respectively, and the highest economical efficiency industry was leisure facilities.

  • PDF

Polychaete Taxocenes Variability Associated with Sediment Pollution Loading in the Peter the Great Bay (the East Sea/Japan Sea)

  • Belan Tatyana A.;Moschenko Alexander A.
    • Ocean Science Journal
    • /
    • v.40 no.1
    • /
    • pp.1-10
    • /
    • 2005
  • Variations in species diversity and abundance of polychaete taxocenes that occurred in 1980-1989 under different contamination levels of bottom sediments were studied in three areas of Peter the Great Bay. The most polluted area was shown to be the Golden Horn Inlet where contaminant contents in the bottom sediments exceed the threshold values of negative biota alterations. Amursky Bay is characterized by a moderate level of contamination, while Ussuriysky Bay has the lowest level of contamination. Pollutant contents vary considerably within the same areas and their separate patches are polluted differently. An integral index characterizing the contamination of bottom sediments is proposed. This index is an average grade of the rank value of contaminant contents in sediments. The index was used to compare the contamination level and data on polychaete species diversity and abundance. The highest species diversity of polychaetes is found in the least affected zones. Monotonous decrease of the species number, as well as decrease in the indices of diversity and evenness, is correlated with pollution level increases. Significant growth of the average polychaete biomass and polychaete density is observed in the case of an increase of contamination from low to moderate levels. Conversely, the biomass and abundance of polychaetes decline following an increase in contamination.

Water Quality Modeling and Environmantal Capacity in the Seom River Basin (섬강유역 환경용량 및 수질 Modeling)

  • 허인량;오근찬;최지용
    • Journal of Environmental Health Sciences
    • /
    • v.24 no.1
    • /
    • pp.80-86
    • /
    • 1998
  • Seom River was major branch of Namhan river, consist of primary basin that Wonjoo-city, Hoingsung-gun and primary contamination source was sewage from human lives. This study was evaluated production contamination loading of each branch basin and water quality grade and water quality simulation by QUAL2E to provide efficient contaminations source control. Rusult of survey, production loading of BOD, T-N, T-P were 26,591 kg/day, 4,560 kg/day, 731 kg/day resectively. Water quality analysis in 17 points of main stream were appeared that 1st grade(BOD 1 mg/l under) was 6 point, 2nd grade was 9 point and 3rd grade was 2 point. And result of water quality analysis for branch steram, first grade was evaluated 68.7%. Based of field data, calibration and verification result were in good agreement with mesured value within coefficient of variance were from 2.59% to 18.73%, from 6.39%, to 28.46%, respectively.

  • PDF

Quantification of Baseflow Contribution to Nutrient Export from a Agricultural Watershed (기저유출이 농업유역의 영양염류 유출에 미치는 영향 정량화)

  • Kim, Geonha;Yoon, Jaeyong;Park, Kijung;Baek, Jongrak;Kim, Youngjoon
    • Journal of Korean Society of Water and Wastewater
    • /
    • v.29 no.3
    • /
    • pp.347-357
    • /
    • 2015
  • Baswflow is defined as short term discharge through groundwater caused by rainfall events. Impacts of baseflow is significant on water quality especially where pervious agricultural watershed as groundwater is more vulnerable to the contamination. In this study, the Cheongmicheon watershed was subjected to study to assess the impacts of baseflow on surface water quality, where more than 90% of pollutant load is originated from the livestock raising area, and very high probability of surface water contamination due to the baseflow. To estimate nutrient loading cased by baseflow, NI (Numerical Integration) model and LOADEST (LOADing ESTimation) model were used.

Source Identification of Nitrate contamination in Groundwater of an Agricultural Site, Jeungpyeong, Korea

  • 전성천;이강근;배광옥;정형재
    • Proceedings of the Korean Society of Soil and Groundwater Environment Conference
    • /
    • 2003.04a
    • /
    • pp.63-66
    • /
    • 2003
  • This study applied a hydrogeological field survey and isotope investigation to identify source locations and delineate pathways of groundwater contamination by nitrogen compounds. The infiltration and recharge processes were analyzed with groundwater-level fluctuation data and oxygen-hydrogen stable isotope data. The groundwater flow pattern was investigated through groundwater flow modeling and spatial and temporal variation of oxygen isotope data. Based on the flow analysis and nitrogen isotope data, source types of nitrate contamination in groundwater are identified. Groundwater recharge largely occurs in spring and summer due to precipitation or irrigation water in rice fields. Based on oxygen isotope data and cross-correlation between precipitation and groundwater level changes, groundwater recharge was found to be mainly caused by irrigation in spring and by precipitation at other times. The groundwater flow velocity calculated by a time series of spatial correlations, 231 m/yr, is in good accordance with the linear velocity estimated from hydrogeologic data. Nitrate contamination sources are natural and fertilized soils as non-point sources, and septic and animal wastes as point sources. Seasonal loading and spatial distribution of nitrate sources are estimated by using oxygen and nitrogen isotopic data.

  • PDF

Effect of fluid contamination on reverse torque values in implant-abutment connections under oral conditions

  • Mostafavi, Azam Sadat;Memarian, Maryam;Seddigh, Mohammad Ali
    • The Journal of Advanced Prosthodontics
    • /
    • v.13 no.1
    • /
    • pp.65-70
    • /
    • 2021
  • Purpose. Implant mechanical complications, including screw loosening, can influence dental implant success. It has been shown that torque values are affected by contamination occurred in implant-abutment (I/A) interface. This study aimed to examine the effects of blood, saliva, fluoride and chlorhexidine contamination on reverse torque values (RTVs) of abutment screws in oral conditions. Materials and Methods. 50 fixtures were mounted into the stainless-steel holders and divided into five groups (n = 10). Except control group (NC), fixture screw holes in other groups were contaminated with chlorhexidine (CG), saliva (SG), blood (BG), or fluoride (FG). Abutment screws were tightened with a digital torque meter. I/A assemblies were subjected to thermocycling and cyclic loading. The mean RTVs were recorded and data were analyzed with one-way ANOVA and Tukey test. Results. Except for specimens in SG (20.56 ± 1.33), other specimens in BG (21.11 ± 1.54), CG (22.89 ± 1.1) and FG (24.00 ± 1.12) displayed significantly higher RTVs compared to NC (19.00 ± 1.87). The highest RTVs were detected in CG and FG. Conclusion. The obtained data robustly suggest that RTVs were significantly affected by fluid contaminations. Specimens in FG and CG displayed the highest RTVs. Therefore, clinicians should have enough knowledge about probable contaminations in I/A interface in order to manage them during clinical procedure and to inform patients about using oral care products.

Study on Surface Scratch Characteristics of Hard Disk by Ramp Loading Method Using a Scratch Tester (스크래치 테스터의 Ramp Loading 방법을 이용한 하드디스크의 표면 스크래치 특성에 관한 연구)

  • Lee R.J.;Kim D.E.;Kang T.S.;Cho Y.B.;Cho K.Y.
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 2005.10a
    • /
    • pp.484-487
    • /
    • 2005
  • In order to get the surface characteristics of the HDI of HDD, the surface damage mechanisms must be totally understood. Particle contamination in hard disk drives is a big concern in today's magnetic recording industry since they are major sources of reliability problems. Namely upon contact with the slider or a contaminant particle, the disk may be scratched or the particles may be embedded into the disk surface. In this work, comparison of scratches was made between those found on actual hard disks and those created using a scratch tester. It was found that ramp loading method is an effective way to make similar scratches as the actual ones. From the ramp loading condition, the relationship between the pressure and the scratch track width could be identified.

  • PDF

Chemical Assessment of Heavy Metal Contamination in Soil

  • Yang, Jae-E.;Choi, Moon-Heon
    • Proceedings of the Korean Society of Soil and Groundwater Environment Conference
    • /
    • 1997.05a
    • /
    • pp.8-11
    • /
    • 1997
  • Current methods of evaluating soil contamination by heavy metals rely on analyzing samples for total contents of metals or quantities recovered in various chemical extracting solutions. Results from these approaches provide only an index for evaluation because these methodologies yield values not directly related to bioavailability of soil-borne metals. In addition, even though concentrations of metals may be less than those required to cause toxic effects to biota, they may cause substantial effects on soil chemical parameters that determine soil quality and sustainable productivity. The objective of this research was to characterize effects of Cu or Cd additions on soil solution chemistry of soil quality indices, such as pH, EC, nutrient cation distribution and quantity/intensity relations (buffer capacity). Metals were added at rates ranging from 0 to 400 mg/kg of soil. Soil solution was sequentially extracted from saturated pastes using vacuum. Concentrations of Cu or Cd remaining in soil solutions were very low as compared to those added to the soils, warranting that most of the added metals were recovered as nonavailable (strongly adsorbed) fractions. Adsorption of the added metals released cations into soil solution causing increases of soluble cation contents and thus ionic strength of soil solution. At metal additions of 200~400 mg/kg, EC of soil solution increased to as much as 2~4 dS/m; salinity levels considered high enough to cause detrimental effects on plant production. More divalent cations (Ca+Mg) than monovalent cations (K+Na) were exchanged by Cu or Cd adsorption. The loss of exchangeable nutrient cations decreased long-term nutrient supplying capacity or each soil. At 100 mg/kg or metal loading, the buffering capacity was decreased by 60%. pH of soil solution decreased linearly with increasing metal loading rates, with a decrement of up to 1.3 units at 400 mg Cu/kg addition. Influences of Cu on each of these soil quality parameters were consistently greater than those of Cd. These effects were of a detrimental nature and large enough in most cases to significantly impact soil productivity. It is clear that new protocols are needed for evaluating potential effects of heavy metal loading of soils.

  • PDF

Investigation of Nitrate Contamination Sources Under the Conventional and Organic Agricultural Systems Using Nitrogen Isotope Ratios (질소 동위원소비를 이용한 관행농업과 유기농업에서의 질산태 질소 오염원 구명)

  • Ko, H.J.;Choi, H.L.;Kim, K.Y.
    • Journal of Animal Science and Technology
    • /
    • v.47 no.3
    • /
    • pp.481-490
    • /
    • 2005
  • Nitrate contamination in water system is a critical environmental problem caused by excessive application of chemical fertilizer and concentration of livestock. In order to prevent further contamination, therefore, it is necessary to understand the origin of nitrate in nitrogen loading sources and manage the very source of contamination. The objective of this study was to examine the nitrate contamination sources in different agricultural system by using nitrogen isotope ratios. Groundwater and runoff water samples were collected on a monthly basis from February 2003 to November 2003 and analyzed for nitrogen isotopes. The nitrate concentrations of groundwater in livestock fanning area were higher than those in conventional and organic fanning area and exceeded the national drinking water standard of 10mg N/ l. The ${\delta}^{15}N$ranges of chemical fertilizer and animal manure were - 3.7${\sim}$+2.3$\textperthousand$ and +12.5${\sim}$26.7$\textperthousand$, respectively. The higher ${\delta}^{15}N$ of animal manure than those of chemical fertilizer reflected isotope fractionation and volatilization of '''N. The different agricultural systems and corresponding average nitrate concentrations and ${\delta}^{15}N$ values were: conventional farming, 5.47mg/e, 8.3$\textperthousand$; organic fanning, 5.88mg/e, 10.1$\textperthousand$; crop-livestock farming, 12.5mg/e, 17.7%0. These data indicated that whether conventional or organic agriculture effected groundwater and runoff water quality. In conclusions, relationship between nitrate concentrations and ${\delta}^{15}N$ value could be used to make a distinction between nitrate derived from chemical fertilizer and from animal manure. Additional investigation is required to monitor long-term impact on water quality in accordance with agricultural systems.

A Note on Relationship between Strengths of Heavy Metals Contamination in Scalp Hair and Organs from Autopsy Subjects (부검체 두발과 장기의 중금속 오염농도 관련성)

  • Lee, Won-Kee;Song, Myung-Unn;Song, Jae-Kee;Lee, Sung-Kook;Park, Sung-Hwa
    • Journal of the Korean Data and Information Science Society
    • /
    • v.10 no.1
    • /
    • pp.215-222
    • /
    • 1999
  • It is well known to use scalp hair as a signal of strengths of heavy metals contamination. In this paper, using the multivariate methods we examine the relationship between strengths of cadmium and mercury in scalp hair and cerebellum, cerebrum, heart, kidney, liver, lung and spleen from 61 korean autopsy subjects. As a result, there is statistically singnificant relationship between strengths of mercury contamination in scalp hair and secondary contaminated organs.

  • PDF