• 한국항만학회지
• /
• 제13권2호
• /
• pp.303-312
• /
• 1999

The automated gate operating system is developed in this paper that controls the information of container at gate in the ACT. This system can be divided into three parts and consists of container identifier recognition car plate recognition container deformation perception. We linked each system and organized efficient gate operating system. To recognize container identifier the preprocess using LSPRD(Line Scan Proper Region Detection)is performed and the identifier is recognized by using neural network MBP When car plate is recognized only car image is extracted by using color information of car and hough transform. In the port of container deformation perception firstly background is removed by using moving window. Secondly edge is detected from the image removed characters on the surface of container deformation perception firstly background is removed by using moving window. Secondly edge is detected from the image removed characters on the surface of container. Thirdly edge is fitted into line segment so that container deformation is perceived. As a results of the experiment with this algorithm superior rate of identifier recognition is shown and the car plate recognition system and container deformation perception that are applied in real-time are developed.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1549-1557
• /
• 2010

다목적 화차는 기존 평판화차 및 컨테이너 화차에 탈부착이 가능한 수송용기를 장착할 수 있도록 하여 컨테이너 및 무개화차 화물을 수송하는 화차를 의미한다. 본 연구는 탈부착식 수송용기 및 다목적 화차의 실질적인 적용 효과를 높이기 위해 품목별 물동량 및 화차운행횟수를 분석하고 투입 가능 구간 선정 및 운영방안을 검토하였다. 다목적 화차는 계절별, 품목별 급격한 수요 변동으로 인한 무개화차 활용도 저하의 문제점을 해결하고 화차의 운행 효율 및 활용도를 높임으로써 원활한 물류수송에 기여할 것으로 기대된다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 춘계학술대회 논문집
• /
• pp.212-216
• /
• 2001

Recently, it has been trending toward speed-up not only in the passenger car but in the freight cu. In this study, we thus performed stress analysis for the carbody for high speed container freight car in use and field test of the freight car in Gyungbu-line so that we may utilize the results as a design guide for speed-up hereafter- Five vertical loading conditions due to dynamic effect and the weight of the carbody and the container applied to locking devices of the carbody and its results are compared with that of a test, As a result, we found that there is need to complement the strength of the carbody in some measure when speed up the present freight car.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1479-1482
• /
• 2004

LMTT (Linear Motor-based Transfer Technology) is horizontal transfer system in the maritime container terminal for the port automation. The system is driven by PMLSM (Permanent Magnetic Linear Synchronous Motor) that is consists of stator modules on the rail and shuttle car. This paper investigates the effect of the drop height of container on impact reaction force of the Impact Absorber (IA) in shuttle car for LMTT. The results of this investigation are obtained from detailed finite element analysis for various parameters, such as the spring coefficient, the drop height of container.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1533-1541
• /
• 2010

Multi-purpose freight car is applicable for both bulk freight and containerized freight to cope with the unbalance between demand and supply due to the demand variation by seasons or directions. In this paper, we suggested the advantages of introducing attachable container to railway freight transportation and possible freight items to use multi-purpose freight car. This results can be used to analyse the amount of attachable container and the feasibility of introducing multi-purpose freight car to railway.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(III)
• /
• pp.109-113
• /
• 2003

Recently, freight cars for diverse purposes were developed to increase the speed of freight car in conventional line. The welded type bogies are applied to these vehicles like container car, gondola car, hopper car, etc. This study was focused on the dynamic characteristics and the stability of freight car to guarantee the running safety. We have conducted the running tests of freight cars in conventional line and described the test results in this paper.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2005년도 춘계학술대회 논문집
• /
• pp.429-432
• /
• 2005

LMTT(Linear Motor based Transfer Technology)는 크게 제어 부, 셔틀 카, 레일로 구성되며, 항만의 자동화를 위한 컨테이너 부두에서 사용되는 새로운 형태의 이송장치이다. 셔틀카는 다시 프레임 부, 구동 부, 휠로 나뉜다. 이 장치를 설계하기 위하여 각 부품에 대한 다양한 연구가 수행되어져야 한다. 이 논문에서는 가로 보가 프레임의 강도에 미치는 영향에 대한 이전의 연구로부터 기초 설계된 프레임에 대해 항만설계기준을 만족하면서 셔틀카의 무게를 최소화할 수 있는 프레임의 치수 최적설계를 수행하였다. 최적화를 위해 설계변수로 프레임 각 부재의 두께를, 목적함수로 프레임의 무게를, 제약조건으로 설계기준 응력과 처짐을 설정하였다.

• 한국항만학회지
• /
• 제13권1호
• /
• pp.87-100
• /
• 1999

This study was focused on analyzing the headway of various types of trailer in Pusan city with the high heavy vehicle rate. Then Passenger Car Equivalent(PCE) was calibrated in order to identify the impact of trailers in the traffic flow at the signalized intersections. To fulfill this goal types of trailer were classified into five categories such as full trailer semi-trailer unloaded semi-trailer semi-trailer loaded with 20ft container and semi-trailer loaded with 40ft container and Passenger Car Equivalents were identified. the Results are as follows: 1) The PCE’s were 2.64, 1.51, 2.09, 2.16 and 2.23 respectively. 2) The saturation flow rate on the signalized intersection was lower than that on the multi-lane highway in the big city of Korea. 3) The start-up delay on the thru lane was similar to the average value in our country but the start-up delay on the left-turn lane was longer than the average value in our country by the impact of container Vehicles.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.399-400
• /
• 2006

LMTT(Linear Motor based Transfer Technology) is a new type of transfer system used in the maritime container terminal fur the port automation, and largely consists of a controller, shuttle car, and rail. The shuttle car is divided into the frame part, the driving part, and wheels. In order to design this system, various researches on each part of it must be conducted. In this study, we dealt with the optimum design for the frame part of the shuttle car designed from previous studies on the strength of the frame with respect to the number of cross beams to minimize the weight of the shuttle car and to satisfy design criteria of cargo-handling systems in container terminal. For the optimization of the frame, thicknesses of each beam were adopted as design variables, the weight of the frame as objective function, and stress and deflection per unit length as constraint condition.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2004년도 추계학술대회
• /
• pp.323-328
• /
• 2004

세계 컨테이너 무역 규모가 연간 $7\%$씩 증가함에 따라 항만 환경이 급격히 변화하고 있다. 이러한 항만의 변화에 성공적으로 대처하기 위해 차세대 항만하역시스템인 LMTT(Linear Motor-based Transfer Technology)의 연구가 진행되고 있다. LMTT용 Shuttle car의 frame부는 컨테이너를 지탱하는 outer beam, frame의 뼈대가 되는 inner beam, 두 beam을 연결시켜 보강하는 cross beam으로 구성되어 있으며, 본 연구에서는 이러한 frame은 설계하기 위하여 cross beam의 개수, 하중 재하 위치 및 inner beam의 위치에 따른 outer beam과의 거리 비 등이 frame의 강도 및 강성에 미치는 영향을 유한요소해석을 통하여 고찰하였다.