• Journal of the Korean Institute of Navigation
• /
• v.10 no.1
• /
• pp.101-127
• /
• 1986

Transportation provides an infrastructure vital to economic growth, and it is an integral part of production . As a port is the interface between the maritime transport and domestic transport sectors, it certainly plays a key role in any economic development. Therefore, it is doubtless that inadequacy of a nation's port will depress the level of throughput, to the level where it fails to meet the target set by the national economic planning schemes. Korea is surrounded by the seas and the economic structure of Korea consists of processing trades, so that it cannot be overstated that substantial economy in maritime transport coasts can be achieved through the improvement of the port transport system. This paper treats the transportation process in Pusan Port by Queueing Simulation method, and the reasonable size of Pusan Port is suggested from the point of view of efficiency maximization. The results of the analysis are summarized as follows; 1) the utility rate is 47.91 percents in general piers, 85-52 percents in container piers, and waiting time 5.2hrs, in general piers, 0.8 hrs, in container piers, and the probability of maximum queue length 12 ships in general piers, 2 ships in container piers, and the probability of waiting is 44 percents in general piers, 8 percents in container pier. 2) in general piers, the improvement of app. 30 percents in port capacity is desirable for operating effectively concerning the current arrival rate. By introducing the traffic control ion container piers, there is no apparent necessity of port investment, but I is expected to reduce invisible congestion occurred along the waiting line. 3) On Pusan Port, the optimal utility rate and the optimal arrival rate for reducing waiting time are 3.5 to 4.0(hrs./ship) in general piers, 5.1 to 6.0(hrs./ship) in container piers.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.746-751
• /
• 2004

Demands for higher productivity in container terminal environments continues to escalate consideration of equipment upgrades. And then transportation of containers using the automated container crane becomes more and more important for productivity enhancements. Introducing a hybrid control architecture to the container crane, it provides a effective means to the automated operation of the container crane. This paper addresses the methodology for automation of container cranes. In addition, this paper proposes a new control architecture for the automated container crane and explains each component of that architecture. The control architecture is composed of a deliberative control layer, a sequencing layer, and a reactive control layer. The proposed architecture is applied to a dual-hoist double-trolley container crane.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1533-1541
• /
• 2010

Multi-purpose freight car is applicable for both bulk freight and containerized freight to cope with the unbalance between demand and supply due to the demand variation by seasons or directions. In this paper, we suggested the advantages of introducing attachable container to railway freight transportation and possible freight items to use multi-purpose freight car. This results can be used to analyse the amount of attachable container and the feasibility of introducing multi-purpose freight car to railway.

• Journal of Korean Port Research
• /
• v.7 no.1
• /
• pp.43-58
• /
• 1993

There has been fast progress in economy in Korea derived by a consecutive five-year plan program for economic development started in the early 1960's. In the field of transportation, rapid changes in the technological environment of transportation and communication have brought a revolution of the transport system, of which inter-modal transportation through containerisation is typical. Because of the rapidly growing traffic volumes of cargo, especially container traffic, and lack of investment into transport infrastructure in the past, both road and railway are beyond their capacity. As a result, the public-road network has suffered a serious congestion problem. For instance, in relation to the corridor between Seoul and Pusan, today, it takes about 14 hours for the journey of container trailer through Kyongbu Expressway, for which it used to take only 7 hours in 1986. For the railway, though the congestion problem is not very serious compared with the road sector, a shortage of capacity on certain main lines has emerged as a problem as railway traffic has increased. Furthermore, the further expansion of the system in near future is difficult due to burden of higher construction the cost. Unlike these two modes, coastal shipping, which has been paid relatively less attention for commodity transport in Korea, shows no constraint in this respect. In addition, it is the most cost efficient mode of transport. This work therefore aims to make a proposal for the alternative inland transportation mode, which is to promote the coastal transport of container. Three obstructing factors for the promotion of the coastal transport are investigated and some solutions for those are suggested as follows : First, it appears to be essential to provide exclusive ports for the coastal shipping, that comply with simplification, specialization and rationalization. The optimum size of berths on the exclusive ports in Pusan port is estimated as 16-20. We found that it needs periodical study and publicity on the advantages from the adoption of the coastal mode. Inducing competition in the coastal shipping market is also necessary. For the supply of the fleet in the coastal shipping, chartering of the surplus ships in the oversea shipping is found to be more desirable than new shipbuilding. Second, to solve the fragmentation of the companies which wish to participate in the coastal transport, government has to implement the subsidy policy. The encouragement of participation of the shipping lines engaging in Korea-Japan run and Korea-East South Asia run, into coastal shipping also needs to be considered cautiously. Third, simplification of the document for entry in ports is needed for rational coastal shipping management. We can use B/L (Bill of Lading) for coastal shipping as a prerequisite to get the indemnity by P & I Club. The reduction of the government controls on entering and leaving the ports also needs.

• Journal of Ship and Ocean Technology
• /
• v.11 no.4
• /
• pp.1-20
• /
• 2007

After the introduction of the World Trade Organization, large scale container ships are being used as a means of transportation for international trade. Therefore, improving the loading and unloading capability of container quays is the most economic way, considering the cost needed for the establishment or expansion of container quays. In this paper, a new container cargo handing system that is equipped with a high performance container crane is suggested. A structural analysis on the container crane is also conducted to decide the form and size of structural member scantlings, using NASTRAN, which is a general structure analysis program.

• Proceedings of the Safety Management and Science Conference
• /
• 2003.11a
• /
• pp.271-284
• /
• 2003

We developing for Gate-Container Yard model to execute the Input & Output process of containers which are waiting in container yard effectively and fast. The optimal model is developed to manage and trace the containers in yard. We developed the put-away strategies which considered the storage time for volume of transportation and the distance between blocks and gates using the MICRO-CRAFT (Computerized Relative Allocation Facilities Technique).

• Journal of the Korean Institute of Navigation
• /
• v.18 no.3
• /
• pp.81-103
• /
• 1994

Increasing costs and competition in the global trade and transportation arena have led to a search for effient, cost-effective, particularly through the application of computer and information technologies. Most recently the introduction of Electronic Data Interchange(EDI) technologies in both trading and trade facili-tation activitiess have bagun to change the complextion of the international transport space. Korea as well as the other developing countries has become aware of the need to embrace EDI strate-gies in order to maintain a competitive market position with their more technologically advanced neighbou-ring and international trading partners. A way of EDI implementation, KMPA has invested large budgets in the research of the EDI since 1990. As the result of study in EDI of transport, KL-Net(Korea Logistics Network) was organized for the EDI business in cargo logistics. In spite of these KMPA's activities, the development plan of container logistics data interchange is not good and useful. So a new model of EDI in transportation is required by using the concepts of cargo data sharing. The purpose of this paper is to suggest a new way of container logistics data interchange model. This paper therefore analyze the information flow in the current container logistics and find the problem in the area to derive a new model. The followings are the results of this paper : (1) There are many problems and user's requirements in container logistics data interchange in Korea. (2) Many messages of UN/EDIFACT are able to be used in container logistics data interchange. (3) The container cargo data are stored in Container Logistics Network(CL-Net) database. And when necessary by requesting message transmission, the container logistics data interchange is possible. (4) Customs cargo clearance system and PORT-MIS can be linked to CL-Net. If the systems, however, are to introduce EDI in data interchange, the quality of user's software has to be assured.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.1
• /
• pp.221-229
• /
• 2011

Recently, intermodal transportation systems are significantly considered as enhanced technique or future railroad logistics. These are aimed for particularly reducing complicated job process in the railroad based transportation and relevant logistic cost in economic viewpoint. In this paper we suggest a horizontal transfer system using hydro-motor and hydro-cylinder for intermodal transportation system. This system can assist to transfer the containers horizontally for train logistics automations.

• Journal of Navigation and Port Research
• /
• v.34 no.7
• /
• pp.559-566
• /
• 2010

The container port industry has been variously studied by many researchers, because the contemporary container transportation and container port industries play a pivotal role in globalization of the world economy. For container terminals, the productivity, affected by many factors, is an important target in measuring container terminal performance. Under this background, finding the critical factors affecting the productivity is necessary. Regression analysis can be used to identify which independent variables are related to the dependent variable, and explore the relationships of them. The aim of paper is to evaluate the factors affecting the productivity of Chinese major terminals by using a regression statistical analysis modeling approach, which is to establish the variable preprocessing model (VPM) and regression analysis model (RAM), by means of collecting the major Chinese container terminals data in the year of 2008.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.167-172
• /
• 2004

Marine ttransport is a big part of container transportation. In view of container terminal. the planning technology is very important to secure the stability and regularity at container yard. The purpose of this paper is to suggest more efficient container yard management by evaluating the container yard occupations from the methods of divide that predict the carried containers in gates.