• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 추계학술대회 논문집
• /
• pp.56-59
• /
• 2007

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 추계학술대회 논문집
• /
• pp.45-48
• /
• 2004

To improve the efficiency characteristics in the resonant converter using the contact-less power supply with the large air-gap and the long primary winding, this paper suggests the three-level series-parallel resonant converter(SPRC). The voltage gain characteristics of the proposed converter have the unit gain in a resonance frequency point of the series and parallel, and input voltage and current in the primary of SPRC are always In phase for the all equivalent load resistance because of the parallel resonant tank of the high impedance. The results are verified on the simulation based on the theoretical analysis and the 4kW experimental prototype.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1675-1680
• /
• 2011

Inductive power transfer module(IPTM) is a contact-less power supply device and its application range has been extended to the large capacity devices such as electric vehicles, industrial mover and railway system as well as small capacity devices such as electric toothbrush charger, celluar phone charger, and so on. For railway application, the IPTM will transfer energy while train stops at a station for around 30[sec]. Therefore, equivalent circuit parameters and coupling coefficient of IPTM are an important design factor for the high energy transfer efficiency. This paper investigates the properties of equivalent circuit parameters and coupling coefficient of U-U type IPTM and U-I type IPTM using an analytical method and experimental method. Considering the coupling coefficient of the U-U type is larger than U-I type's, the U-U type is suitable for an application which need maximum power transfer and high efficiency.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 하계학술대회 논문집
• /
• pp.574-576
• /
• 2008

Now there are two types Non-contact compensation AC automatic voltage regulator (A.V.R). One is transformer compensation regulator, whose principle is the combination of multiple compensation transformers, do the compensation by turning on and off the connections of the transformer through the multi-full bridge circuit. This method removed the mechanical drive and contacts, which increases the life and the dynamic performance of the A.V.R. However, the compensation is multilevel, and it needs many compensation transformers and switches, the circuit is complex, the compensation precision is low. Another type is PWM switch AC regulator, whose principle is getting the AC voltage from the input, then induce the AC compensation voltage through commutating and high frequency PWM transforming, and phase tracking. Here the compensation is step-less, the compensation precision is high, and the response is fast. But the circuit is complex, and it needs an inverse compensation transformer, which is difficult to realize high-power applications. In this paper, it shows an Automatic Voltage Regulator which use high frequency PWM inverter do compensation. This A.V.R has the function as the custom-power, which make the performance of the power supply in a high level.

• 전기학회논문지
• /
• 제62권8호
• /
• pp.1163-1168
• /
• 2013

The maximum allowable value of loop impedance($Z_s$) to secure the operation of overcurrent protective devices and the safety for indirect contact is a very important in TN-C-S system. The loop impedance is divided into inner loop impedance which consumer can adjust and external loop impedance($Z_e$) which only electric operator can adjust. Thus, an external loop impedance which limits to less than a certain value is a very important factor for human body protection against electric shock in TN-C-S system. The concept of loop impedance($Z_s$) is recently introduced to the domestic, the study about external loop impedance is yet insufficient. However, the study about the reference impedance as specified by the IEC 60725 standard to improve the quality and reliability of the power supply is being made. In this paper, reference value of external loop impedance($Z_e$) to meet domestic environment will be proposed by the nationwide measurement and statistical analysis.

• 한국산학기술학회논문지
• /
• 제12권3호
• /
• pp.1302-1307
• /
• 2011

본 논문은 코일 제작 시 고려사항인 1, 2차측 코일 인덕턴스, 턴수, 크기, 두께, 차폐지 등을 고려하여 리쯔 와이어로 나선형 코일을 제작하는데 이때 반자동화 권선기를 사용하게 된다. 1, 2차측 코일 사양을 정하여 코일을 제작할 때 다양한 사양의 리쯔 와이어와 나선형 코일을 필요로 하게 되는데, 이때 제작 비용, 기간, 제작 시 발생하는 불량 등으로 인해 코일 샘플 제작에 어려움이 발생하고 원하는 사양의 코일 품질 관리에도 어려움이 생기게 된다. 이를 개선하기 위해 2차측의 정류부를 개선함으로써 코일 설계 및 제작 시 다양한 코일 제작 사양의 범위를 좀더 포괄적으로 할 수 있으며 제작 시 발생하는 비용을 줄이고, 기간 단축 및 코일의 품질 관리를 개선하고자 한다.

• 대한기계학회논문집B
• /
• 제39권6호
• /
• pp.527-534
• /
• 2015

본 연구에서는 직접 탄소 연료전지(DCFC)에서 세 종류의 탄화수소(메탄, 에탄, 프로판) 열분해를 이용하여 다공성 니켈 연료극에 탄소를 직접 생성시켜 연료극과 연료간의 물리적 접촉을 향상시켰다. 전자현미경으로 각각의 탄화수소로부터 생성된 탄소 입자들이 탄소 수가 증가함에 따라 각각 탄소구형체(CS), 탄소나노튜브(CNT), 탄소나노섬유(CNF)임을 확인하였다. 그리고 탄소 샘플들의 결정성을 알아보기 위해 라만 산란 분석을 수행하였고, 탄화수소의 탄소 수가 증가할수록 생성된 탄소의 결정성이 떨어지고 더 유연하였다. 동일한 질량의 탄소로 채워진 연료극의 DCFC 성능을 $700^{\circ}C$ 에서 측정하였고, CNT 와 CNF 가 CS 보다 반응성이 좋아 각각 148%, 210% 높은 전력밀도를 보였다. 이는 결정성이 떨어지는 CNT 와 CNF 의 낮은 전하전달저항에 의한 것으로 사료된다.