• 전기학회논문지P
• /
• 제56권4호
• /
• pp.195-200
• /
• 2007

This paper describes the countermeasures for preventing the electric shock which can be occurred in the low-voltage handhole underwater. Low-voltage handholes were designed and made for the test in the testing field. Which were installed 4 cases. a metal handhole cover was employed in case 1; FRP(Fiber glass Reinforced Plastic) handhole cover in case 2; an insulated rubber was put on the joint of the cables in case 3; the exposed conductors(cover, frame etc) were commoned and grounded in case 4. Thus, an ground potential near the low-voltage handhole was measured and evaluated quantitatively for the 4 cases. The measured results show that the potential of case 2.3 were lower than that of case 1 because the insulated rubber and the FRP cover prevented direct contact to the fault point. The case 4 is the lowest among the 4 cases because the common and grounding helps the fault current release into the ground, which makes the ground potential rise lower. As a result, although each case has the defects, these ways can effectively lower the electric shock risk in the low-voltage handhole.

• 한국실내디자인학회논문집
• /
• 제23권1호
• /
• pp.152-161
• /
• 2014

Beijing, the capital city of China, has gradually increased its amount of culture space and has also introduced a diverse range of cultural facilities to improve the satisfaction of its citizens lives. In particular are its art museums, which are a symbol of the urban culture and enrich the cultural life of its citizens and are also expected to play a role as a psychological pivot point. However, in comparison with the characteristics of various ethics, local, and the influence on the museums of China, studies which analyze the exterior of the art museums are not sufficient. This is because previous research has focused too heavily on the interior of the art museums. This paper aims to derive distinction through the analysis of the exterior of several art museums and present design factors and application methodology. This research looks at art museums in China and analyzes the current state of the art museums that have been developed based on the culture of Beijing. Through analyzing the case study of five art museums that have been selected in Beijing we can improve our understanding of Chinese culture space and derive distinct design factors. Distinct factors in the exterior of art museums include connection, culture, geographic features, public, and creation. This study is expected to contribute to that exterior of the art museum will be as a contact zone to form a spatial connection and a cultural symbol that can reflect Beijing's unique culture characteristics.

• 전력전자학회논문지
• /
• 제23권5호
• /
• pp.299-304
• /
• 2018

An ideal circuit breaker should supply electric power to loads without losses in a conduction state and completely isolate the load from the power source by providing insulation strength in a break state. Fault current is relatively easy to break in an Alternating Current (AC) circuit breaker because the AC current becomes zero at every half cycle. However, fault current in DC circuit breaker (DCCB) should be reduced by generating a high arc voltage at the breaker contact point. Large fire may occur if the DCCB does not take sufficient arc voltage and allows the continuous flow of the arc fault current with high temperature. A semiconductor circuit breaker with a power electronic device has many advantages. These advantages include quick breaking time, lack of arc generation, and lower noise than mechanical circuit breakers. However, a large load capacity cannot be applied because of large conduction loss. An extinguishing technology of DCCB with polymeric positive temperature coefficient (PPTC) device is proposed and evaluated through experiments in this study to take advantage of low conduction loss of mechanical circuit breaker and arcless breaking characteristic of semiconductor devices.

• 대한기계학회논문집A
• /
• 제20권12호
• /
• pp.3847-3855
• /
• 1996

In order to study the relationship between static and cynamic behaviors of silion caride, both quasi-static indentaiton and impact experiments of spherical particle have been conducted. The difference inmaterial behavior when using the two mehtods suggests a loading rate difference in the damate pattrern and fracture strength of silicon carbide. This investigation showed some difference in damage pattern according to particla property, especially inthe case of particle impact. There was no differences in deformation behaviors according to the loading rate when the crater profiles were compared with each other at the same contact radius. From the result of residual strength evaluation, it was found that the strength degradation began at the initiation of ring crack and its behavior was colsely related to morphologies of the damage developed which was also dependent upon the extent of deformation atthe loaidng point. In the case of static indentation, there didnot exist the particle property effects onthe strength degradation behavior.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.2041-2046
• /
• 2004

Recently series of steam explosion experiments have been performed in the TROI facility to identify the influence of corium compositions on the occurrence of a spontaneous steam explosion varying corium melt composition. The compositions of the corium were 0 : 100, 50 : 50, 70 : 30, 80 : 20 and 87 : 13 at weight percent of $UO_2$ to $ZrO_2$, and the mass of the corium was about 10kg. Corium melt at 0 : 100 weight percent (pure zirconia) caused a strong spontaneous steam explosion, and melt at 70 : 30 weight percent(eutectic corium) led to a weak steam spike, while melts at other compositions did not result in spontaneous steam explosions, when they came into contact with 67cm deep water pool at room temperature. It seems that the explosivity of pure zirconia is stronger than that of corium at other compositions and a steam explosion is not likely to occur with corium melts at non-eutectic compositions which are included in mushy zone region.

• 한국기계가공학회지
• /
• 제10권2호
• /
• pp.1-8
• /
• 2011

5-axis NC machining has a good advantage of the accessibility of tool motion by adding two rotary axes. It offers numerous advantages such as expanding machining fields in parts of turbo machineries like impeller, propeller, turbine blade and rotor, reasonable tool employment and great reduction of the set-up process. However, as adding two rotary axes, it is difficult to choose suitable machining conditions in terms of cutter path and cutter posture at a cutter contact point. Therefore in this paper, it is proposed to decide suitable machining condition through an experimental method such as adopting various cutter paths, cutter postures types. Also, in order to increase the efficiency of 5-axis machining, it is necessary to minimize the cutter posture changes and create a continuous cutter path while avoiding interference. This study, by using an MC-space algorithm for interference avoidance and an MB-spline algorithm for continuous control, is intended to create a 5-axis machining cutter path with excellent surface quality and economic feasibility. finally, this study will verify the effectiveness of the suggested method through verification processing.

• 제어로봇시스템학회논문지
• /
• 제15권2호
• /
• pp.184-191
• /
• 2009

The common requirements of rough terrain mobile robots are long-term operation and high mobility in rough terrain to perform difficult tasks. In rough terrain, excessive wheel slip could cause an increase in the amount of dissipated energy at the contact point between the wheel and ground or, even more seriously, the robot could lose all mobility and become trapped. This paper proposes a traction control algorithm that can be independently implemented to each wheel without requiring extra sensors and devices compared with standard velocity control methods. The proposed traction algorithm is analogous to the stick-slip friction mechanism. The algorithm estimates the slippage of wheels by angular acceleration change, and controls the increase or decrease state of torque applied to wheels Simulations are performed to validate the algorithm. The proposed traction control algorithm yielded a 65.4% reduction of total slip distance and 70.6% reduction of power consumption compared with the standard velocity control method.

• 가정∙방문간호학회지
• /
• 제15권1호
• /
• pp.37-43
• /
• 2008

This paper provides the guidelines from which to develop a visiting health care program at the Public Health Center in Korea and involves an expanded payment compensation system of preventive services based on the new long-term health insurance system in Japan. The function and management methods to achieve the goals practiced in a community contact center for elderly support which have recently been established will guide the specific directions and strategies that the Public Health Center should pursue. That is to say, comprehensive and continuous efforts will be put forth in preventive home visiting care targeting the elderly in certain jurisdictions. At this point in time in which the visiting care nursing program has not yet started, visiting health care provided by the Public Health Center oversees chronic diseases of a vulnerable population. But after it has been developed nationwide, the visiting health care system at the Public Health Center will be distinctive and focused on health promotion and prevention.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1996년도 춘계학술대회
• /
• pp.22-26
• /
• 1996

In this paper, we designed 4-channel electrolyte analyzer that can measure simultaneousely the 4 electrolytes - pH, $pNa^{+}$, $pCa^{2+}$, and $pK^{+}-$ using 2-point calibration and implemented it. Developed electrolyte analyzer consists of singal processing part, actuator part and control unit for sample flow system. To implement reliable instrument, design considerations are emphasized on flow system and sample chamber that requires small sample volume and prevent air contact with sample solution. In addition to the hardware design, we developed system software which controls full measuring process. After system developed, we verified the system performance by the test measurement for pH, $pNa^{+}$, $pCa^{2+}$, and $pK^{+}$ value.

• 한국지능정보시스템학회:학술대회논문집
• /
• 한국지능정보시스템학회 2003년도 춘계학술대회
• /
• pp.214-225
• /
• 2003

Now a day, the company must strengthen the contact-point of the customer who the company has and has to block the secession of the customer by providing services or goods on time. Under this market situation, the corporation extends the CRM for the customer management and strategic management, and set the CRM-strategies up for managing the customer relationship. For this, the present enterprise's level and the business-ability for the management of the customer relationship should be considered. Therefore, in this study, we will analyze the critical factors to set the CRM up as a strategy by studying the literature review. In the critical factors, the factors of enterprise level as well as the technical factor will be included. Secondly, as you know, the BSC is used to evaluate the corporation as a index. In this study the BSC model is changed and rearranged for the applied BSC model to measure the C3M level of companies. Thirdly, based on the model developed, the factors in the first step are classified by levels and weighted values are calculated by using AHP method. As a result, we will show the diagnostic model for check the operational performance of management, marketing and sales etc.