• 제목/요약/키워드: Contact intensity

검색결과 279건 처리시간 0.03초

세라믹 마멸에 있어서의 새로운 파라메터 제안 (I) 질화규소와 지르코니아의 마찰$\cdot$마멸 특성 (A Propotition of a New Parameter in Ceramic Wear(I) Friction and Wear Characteristics of Silicon Nitride and Zirconia)

  • 김석삼;김상우
    • 대한기계학회논문집
    • /
    • 제17권6호
    • /
    • pp.1441-1455
    • /
    • 1993
  • 본 연구에서는 최신기법에 의해서 제조된 HIP제 질화규소와 지르코니아를 실험재료로 하여 무윤활하에서의 미끄럼마찰·마멸실험을 수행하여 마찰·마멸특성을 규명하고, SEM을 이용한 마멸면의 미시적 관찰을 통해서 세라믹의 마멸기구를 조사하 여 세라믹마멸기구의 마멸모델을 제시하고자 한다. 제시된 마멸모델에서 파괴역학을 도입하여 이론해석과 고찰을 수행하여 보다 실용적인 세라믹의 마멸율울 평가할 수 있 는 새로운 무차원 파라메터를 제안하고자 한다.

고속철도 레일의 피로수명에 영향을 미치는 매개변수 연구 (The Parametric Study Effecting on the Fatigue Life of Rail on High Speed Railway)

  • 박용걸;강윤석;고동춘;성덕룡
    • 한국철도학회논문집
    • /
    • 제12권3호
    • /
    • pp.396-404
    • /
    • 2009
  • 고속열차의 개발과 함께 구름접촉피로에 의한 레일의 피로균열 및 피로파괴에 대한 연구를 통해 주행안정성을 확보할 수 있는 방안 마련이 필요하다. 따라서 본 연구에서는 Eisenmann의 근사계산식(실용식)을 이용하여 속도, 차륜반경, 궤도지지강성, 침목간격, 축중, 궤도품질에 따른 레일내부 발생응력을 검토하였다. 또한, 유한요소해석을 통해 초기균열의 길이 및 각도, 온도에 따라 레일두부에서 발생하는 전단응력을 검토하여 모드별 응력확대계수를 도출하였다. 이로써 고속철도 레일의 피로수명에 영향을 미치는 주요인자들을 확인하였다.

복합 센서의 상태 판정 알고리즘을 적용한 노면결빙 예측 및 강설 감지 시스템 개발에 관한 연구 (Study on the Development of Road Icing Forecast and Snow Detection System Using State Evaluation Algorithm of Multi Sensoring Method)

  • 김종우;정영우;남진원
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제17권5호
    • /
    • pp.113-121
    • /
    • 2013
  • 본 연구의 복합 센서의 상태 판정 알고리즘을 적용한 노면결빙 예측 및 강설 감지 시스템은 기존 단일 센서 만을 이용하던 기존 방식에서 벗어나, 접촉식/비접촉식 센서 및 적외선 카메라를 통합 운영하여 분사 시스템의 분사 시기와 융설액 분사량을 최적 제어한다. 시스템에 적용된 상태 판정 알고리즘은 취득한 온/습도 데이터와 수분 감지 데이터, 관측된 도로 영상의 영상처리기술 등을 이용하여 노면결빙 위험상태와 강설 상태 뿐만 아니라 강설 강도까지 구분하여 판정을 수행한다. 제작된 시스템의 현장 적용 실험에서는 강설 상태 감지율 89% 습윤 상태 감지율 94%의 우수한 판정 결과와 신뢰성을 검증하였다.

함탄층(含炭層) 내의 chiastolite-shale의 개발(開發) 이용(利用)에 관(關)한 연구(硏究) (The Research on the Exploitation and Utilitization of Chiastolite bearing shale in the Coal bearing strata)

  • 김옥준;김규한
    • 자원환경지질
    • /
    • 제8권3호
    • /
    • pp.135-146
    • /
    • 1975
  • The chiastolite bearing shale was known to occur in various coal fields in South Korea among which the Kangneung coal fields is the most outstanding in quality and quantity of chiastolite. The chiastolite occurs mostly in black shales of Sadong formation and little in shales of Hongjom and Kobangsan formations, and is most abundant in the footwall coaly shales of the Sadong coal seams. The chiastolite has been proved to be thermal contact product of the high aluminous shale that comes into contact with Kangneung granite. The distribution of chiastolite in the Kangneung coal field is irregular. The eastern part of the region contains more chiastolite than that of western part. It is believed that the difference of the grade is due to the intensity of metamorphism. The grade of chiastolite in the shale varies from few percent up to as high as 60 % in volume, and the minable reserve of the chiastolite is estimated about 4,700,000 tons. This reserves is rather concentrated in few localities such as in Jiam Mine, Jungrim Mine, Sir 1 Hang in the Whasung Mine, the second and third sections of Kangneung Mine and Umbuelri district. The chemical composition of chiastolite bearing coaly shale is $SiO_2$, 35.0%; $Al_2O_3$, 27.0%; $Fe_2O_3$, 0.29%.

  • PDF

철도차륜의 구름접촉피로에 의한 수명예측에 관한 연구 (A Study on the Life Span Prediction of Railroad Wheels caused by Rolling Contact Fatigue)

  • 전종균;양진승;박삼진;이규세;마양수
    • 한국산학기술학회논문지
    • /
    • 제7권6호
    • /
    • pp.1012-1020
    • /
    • 2006
  • 철도차량의 차륜에서 발생하는 크랙은 표면으로부터 개시하는 표면크랙, 내부에서 개시하는 내부크랙으로 나눌 수 있고, 이들 크랙은 철도의 안전운행에 위험요소가 된다. 그러므로 이들 크랙의 성장수명 판단은 매우 중요하다. 본 연구에서는 철도차륜의 표면크랙 및 내부크랙의 응력분포상태, 변위 및 성장수명을 연구하였다. 특히 내부 및 표면크랙에 대해 유한요소해석을 실시하여 크랙선단의 응력상태, 변위, 응력확대계수를 찾아내었고, 이를 바탕으로 Paris 공식을 사용하여 성장수명을 예측하였다.

  • PDF

R2R Hall Sensor 측정 장치를 이용한 비접촉식 성능평가 (The quality evaluation of SmBCO CC by non-contact R2R Hall sensor array system)

  • 오재근;오상수;하동우;하홍수;고락길;김호섭;송규정;이남진;문승현
    • 한국초전도ㆍ저온공학회논문지
    • /
    • 제10권3호
    • /
    • pp.1-4
    • /
    • 2008
  • For the effective evaluation of superconducting properties of a coated conductor, with a long length, a non destructive characterization technique including a reel-to-reel (R2R) Hall measuring system have been developed. A non-contact R2R Hall sensor array system was particularly designed to measure the superconducting property of coated conductors. The superconducting properties of long length coated conductors were measured by using this device. It was demonstrated that this system was convenient to measure the intensity and distribution of the magnet field applied perpendicular to the surfaces of the coated conductors. Using this device, the defect and low critical current density(Jc) area of coated conductors could be detected in real-time measurement.

A Study on the Determinants of Satisfaction for The Generational Integration Programs

  • Mi-Hwa JANG;Woo-Sik LEE
    • 웰빙융합연구
    • /
    • 제7권2호
    • /
    • pp.13-21
    • /
    • 2024
  • Purpose: The purpose is to expand the role of local senior welfare centers as a place for intergenerational integration by analyzing the intergenerational awareness and satisfaction of participants in the intergenerational integration program. Research design, data and methodology: The empirical study conducted a survey on 205 participants (114 seniors, 91 teenagers) of the generation integration program being implemented at a senior welfare center located in Seoul. Results: Regarding the satisfaction of participants in the generation integration program, both the elderly and youth showed that the more contact they had between generations, the higher the satisfaction with participation. In the case of the elderly, the better the subjective health status, the older the respondent, and the lower the educational level, the higher the satisfaction, and the more frequently they met youth, the higher the satisfaction. On the other hand, the longer the youth participated in the program, the weaker their negative emotions toward the elderly, and the higher the degree of visits to grandparents, the higher their satisfaction with participation. Conclusions: The biggest determinant of satisfaction with the generational integration program at senior welfare centers is the intensity and frequency of contact between the elderly and youth generations.

Influence of Surface Morphology and Substrate on Thermal Stability and Desorption Behavior of Octanethiol Self-Assembled Monolayers

  • ;강훈구;;;노재근
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
    • /
    • pp.219-219
    • /
    • 2012
  • The formation and thermal desorption behaviors of octanethiol (OT) SAMs on single crystalline Au (111) and polycrystalline Au, Ag, and Cu substrates were examined by X-ray photoelectron microscopy (XPS), thermal desorption spectroscopy (TDS), and contact angle (CA) measurements. XPS and CA measurements revealed that the adsorption of octanethiol (OT) molecules on these metals led to the formation of chemisorbed self-assembled monolayers (SAMs). Three main desorption fragments for dioctyl disulfide (C8SSC8+, dimer), octanethiolate (C8S+), and octanethiol (C8SH+) were monitored using TDS to understand the effects of surface morphology and the nature of metal substrates on the thermal desorption behavior of alkanethiols. TDS measurements showed that a sharp dimer peak with a very strong intensity on single crystalline Au (111) surface was dominantly observed at 370 K, whereas a broad peak on the polycrystalline Au surface was observed at 405 K. On the other hand, desorption behaviors of octanethiolates and octanethiols were quite similar. We concluded that substrate morphology strongly affects the dimerization process of alkanethiolates on Au surfaces. We also found that desorption intensity of the dimer is in the order of Au>>Ag>Cu, suggesting that the dimerization process occurs efficiently when the sulfur-metal bond has a more covalent character (Au) rather than an ionic character (Ag and Cu).

  • PDF

Sputter Etching한 Poly(ethylene terrephthalate)와 Nylon 6 Film의 표면특성 (Surface Characteristics of Sputter Etched Poly(ethylene terephthalate) and Nylon 6 Films)

  • Kang, Koo;Wakida, T.;Cho, In-Sul;Cho, Hwan
    • 한국염색가공학회지
    • /
    • 제3권2호
    • /
    • pp.25-33
    • /
    • 1991
  • Poly(ethylene terephthalate)(PET) and nylon 6 films stretched uniaxially and biaxially were sputter etched in the presence of argon gas. The surface of the etched films was investigated using a scanning electron microscope(SEM). While cracks perpendicular to the stretched direction were observed in the uniaxil stretched films sputter etched for 30 min., many protrusions were formed in the biaxial stretched films at the height of 0.3-0.4 gm for PET and $0.1-0.2\mum$ for nylon 6. The tops of two or three protrusions merged etching time increased to 60 min. The contact angle to water of the sputter etched PET and nylon 6 films decreased steeply when etched for one to 3 min. In order to investigate chemical changes on the surface ESCA analysis was carried out. In both films sputter etched $C_{1s}$ intensity decreased and $O_{1s}$ intensity increased compared with the unetched ones.

  • PDF

Effect of Washing and Subsequent Heat Treatment on Water Repellency of Silk Fabric Treated with Fluorocarbon Resins

  • Park, Hyei-Ran;Lee, Mun-Cheul
    • 한국염색가공학회지
    • /
    • 제24권3호
    • /
    • pp.173-179
    • /
    • 2012
  • Silk fabric treated with fluorocarbon resins (Asahi Guard AG-7005 and AG-E061) were washed and subsequently heat treated varying the washing cycles and the temperature. After the processing, the water and oil repellencies, and contact angle to water were evaluated. The water and oil repellencies decreased by the washing and recovered by following heat treatment. Also ESCA measurement was carried out to investigate the surface chemical composition of the treated fiber. The $F_1s$ intensity of the treated fabric decreased by the washing and recovered by the subsequent heat treatment. On the other hand, the $O_1s$ intensity increased by the washing and decreased by following heat treatment. From the results, it is clear that change of the water and oil repellencies of the silk fabric treated with fluorocarbon resin occurred by the washing and subsequent heat treatment. Considering a change of the water repellency of the silk fabric treated with fluorocarbon resin, it seems likely that the fluoroalkyl group of the fluorocarbon resin rotates from surface to inside of the fiber by the washing to adapt to the hydrophilic circumstance, and the orientation of the fluoroalkyl groups of the resin disturbed by the washing recovers the orientation to the fiber surface after the subsequent heat treatment.