• 대한치과기공학회지
• /
• 제37권1호
• /
• pp.17-21
• /
• 2015

Purpose: In this study, Spreadability of denture adhesive in accordance with the saturation level of saliva, respectively, by using the resin plate and the glass was measured thickness and Spreadability. Methods: Examine the spreadability of denture adhesive in accordance with the saturation level of saliva, respectively, by using the resin plate and the glass was measured thickness and Spreadability. Also, by measuring the adhesive strength according to the amount of saliva, and the edentulous patients using denture adhesive and dry mouth patients attempt to provide clinical information of the denture adhesive. Therefore, by using the relatively low shrinkage cold curing resin, after fabricating specimen of plate form, for 7 days, it was immersed in water. Results: For the control group only denture adhesive, an artificial saliva for the experimental group were injected in $0.1m{\ell}$, $0.2m{\ell}$ and $0.3m{\ell}$ of the denture adhesive on the surface, experimental results of the investigation of the 10 times the tensile bond strength of the specimens in each group was obtained the following results. Conclusion: As the time to pressure increase in the same amount of saliva was found that the amount coming out of the denture adhesive, as the amount of saliva in the same pressure increase coming out of many denture adhesives. And the greater the pressure came out a lot of denture adhesives. Spreadability in measuring saliva contact with $0.1m{\ell}$ and $2m{\ell}$ and $3m{\ell}$ group pressured the diameter of the circular was the denture adhesive is small when compared to the group without adding the pressure of 2kg and 3kg put the saliva. The size of the circle is the same amount of saliva denture adhesive spread more pressure showed a greater increase.

• 대한기계학회논문집B
• /
• 제37권7호
• /
• pp.629-636
• /
• 2013

공압 부상은 베르누이 원리에 기초한다. 그러나 공압 부상 방법은 제품의 원가 상승의 요인이 되는 대량의 유량을 소모하는 것으로 알려져 있다. 이 논문에서는 베르누이 부상 유동의 통찰력을 얻기 위해 수치 해석 연구를 수행하였다. 3차원 압축성 Navier-Stokes 방정식과 SST k-${\omega}$ 난류모델에 유한 체적법을 적용하여 계산하였다. 기체 유량, 공정 제품의 직경 그리고 원형실린더와 공정 제품사이의 간극을 다양하게 변화하여 공정 제품 주위의 유동 특성을 조사하였다. 그 결과 부상력을 위한 최적의 간극과 공급 기체 유량이 증가하면 큰 부상력이 발생한다는 것을 알았다.

• 폴리머
• /
• 제27권5호
• /
• pp.449-457
• /
• 2003

액중건조법을 사용하여 PCL/PEO 마이크로캡슐을 제조하여 형태적 분석 및 제조 조건에 따른 특성을 살펴보고 거동을 통하여 약물 전달 체계로서의 가능성을 고찰하였다. 유화제의 종류 및 농도 그리고 교반 속도에 따른 마이크로캡슐의 입경과 형태의 변화에 대하여 광학 현미경과 SEM을 사용하여 관찰하였다. 또한 접촉각 측정을 통해 PCL/PEO와 약물간의 계면에서의 부착일을 살펴보았으며, 방출 거동을 알아보기 위해 UV/vis. 흡광 광도법으로 흡광도를 측정 하여 용출된 약물의 양을 정량하였다. 그 결과, 마이크로캡슐의 평균 입경이 170 nm∼68 $\mu$m인 구형의 형태를 나타내었으며, PEO의 함량이 증가함에 따라 친수성기가 증가하여 물에 대한 부착일이 증가함을 알 수 있었다. 또한 약물 방출 실험을 통하여 PEO의 함량을 높게 하고 교반 속도를 빠르게 하여 제조한 마이크로캡슐의 약물 방출이 상당히 빠름을 알 수 있었다 이는 PEO의 함량이 증가함에 따라 친수성기가 증가하고 계면력이 증가하기 때문이라 사료된다.

• 대한치과보철학회지
• /
• 제35권4호
• /
• pp.719-741
• /
• 1997

This study was undertaken to compare by Atomic Force Microscope the effects of various finishing and polishing instruments on surface roughness of filling and veneering composite resins. Seven composite resins were studied : Silux Plus (3M Dental Products, U.S.A.), Charisma (Heraeus Kulzer, Germany), Prisma THP (L.D.Caulk, Dentsply, U.S.A.), Photoclearfil (Kuraray, Japan), Cesead (Kuraray, Japan), Thermoresin LC (GC, Japan), Artglass (Heraeus Kulzer, Germany). Samples were placed and polymerized in holes (2mm thick and 8.5mm in diameter) machined in Teflon mold under glass plate, ensuring excess of material and moulded to shape with polyester matrix strip. Except control group (Polyester matrix strip), all experimental groups were finished and polishied under manufacturer's instructions. The finishing and polishing procedure were : carbide bur (E.T carbide set 4159, Komet, Germany), diamond bur (composite resin polishing bur set, GC, Japan), aluminum-oxide disc (Sof-Lex Pop-On, 3M Dental Products, U.S.A.), diamond-particle disc (Dia-Finish, Renfert Germany), white stone bur & rubber point( composite finishing kit, EDENTA, Swiss), respectively. Each specimens were evaluated for the surface roughness with Atomic Force Microscope (AutoProbe CP, Park Scientific Instruments, U.S.A.) under contact mode and constant height mode. The results as follows : 1. Except Thermoresin LC, all experimental composite resin groups showed more rougher than control group after finishing and polishing(p<0.1). 2. A surface as smooth as control group was obtained by $Al_{2}O_{3}$ disc all filling composite resin groups except Charisma and all veneering composite resin groups except Thermoresin LC(p<0.05). 3. In case of Thermoresin LC, there were no statistically significant differences before and after finishing and polishing(p>0.1). 4. Carbide bur, diamond bur showed rough surfaces in all composite resin groups, so these were inappropriate for the final polishing instruments.

• 한국정밀공학회지
• /
• 제15권8호
• /
• pp.46-59
• /
• 1998

This paper presents shape design, surface construction, and cutting path generation for the surface of marine ship propeller blades. A propeller blade should be designed to satisfy performance constraints that include operational speed which impacts rotations per minutes, stresses related to deliverable horst power, and the major length of the marine ship which impacts the blade size and shape characteristics. Primary decision variables that affect efficiency in the design of a marine ship propeller blade are the blade diameter and the expanded area ratio. The blade design resulting from these performance constraints typically consists of sculptured surfaces requiring four or five axis contoured machining. In this approach a standard blade geometry description consisting of blade sections with offset nominal points recorded in an offset table is used. From this table the composite Bezier surface geometry of the blade is created. The control vertices of the Hazier surface patches are determined using a chord length fitting procedure from tile offset table data. Cutter contact points and path intervals are calculated to minimize travel distance and production time while maintaining a cusp height within tolerance limits. Long path intervals typically generate short tool paths at the expense of increased however cusp height. Likewise, a minimal tool path results in a shorter production time. Cutting errors including gouging and under-cut, which are common errors in machining sculptured surfaces, are also identified for both convex and concave surfaces. Propeller blade geometry is conducive to gouging. The result is a minimal error free cutting path for machining propeller blades for marine ships.

• 대한기계학회논문집A
• /
• 제37권10호
• /
• pp.1207-1218
• /
• 2013

나달식 등 한쪽 차륜과 레일의 접촉력에 기반한 기존 탈선계수식으로는 열차 주행 시 여러 가지 요인에 의해 발생하는 다양한 유형의 탈선을 이론적으로 예측하기 어렵다. 이를 보완하기 위하여 개발된 단일윤축 탈선계수는 타고오름탈선, 미끄러져오름 탈선, 전복탈선 및 이들의 복합유형 탈선을 잘 예측할 수 있고, 접촉부 마찰계수, 플렌지 각 등 기존의 탈선계수식에서 고려하던 기계적 인자뿐만 아니라 윤중감소/증가, 궤간, 차륜직경, 축상 베어링 위치 등 다양한 탈선영향인자들도 고려할 수 있다. 본 논문에서는 단일윤축 탈선계수식으로 이러한 다양한 탈선영향인자들을 고려하여 기존의 나달식, 바인스톡 식 등으로 구할 수 없었던 탈선현상을 분석한다. 마지막으로 동역학 시뮬레이션을 이용하여 이론적인 단일윤축 탈선계수식 결과들의 타당성을 입증한다.

• The Plant Pathology Journal
• /
• 제20권2호
• /
• pp.81-84
• /
• 2004

Branched broomrape (Orobanche ramosa) is a holo-parasitic flowering plant that attaches to the root of its host, green plant, by means of a specialized structure known as haustorium. Following successful contact and penetration on susceptible plant root, complex tissue of Orobanche cells is formed which is known as the tubercle. Newly formed tubercles contain high activity ofindole-3-acetic acid (IAA). Triiodobenzoic acid (TIBA), as an inhibitor of IAA polar transport, was utilized to investigate the supply and requirement of auxin to the developing O. ramosa on tomato plant. There was no significant reduction in the incidence of O. ramosa per pot of different TIBA treatments. However, infection severity in terms of the number of O. ramosa shoots that emerged per plant and number of attachments per plant root system were significantly reduced by 60 % and 45 % on TIBA treated plants, respectively. Histo-logical studies revealed conspicuous delay in the initiation of xylem vessel differentiation inside tubercles of the TIBA treated tomato plants. Also, differentiated vessels showed thinner secondary wall deposition, and improper alignment within bundles inside those tubercles. They were wider and shorter in diameter in comparison to those of untreated plants. These findings were attri-buted to the short supply of IAA required for normal development, and to the xylem vessel differentiation of O. ramosa tubercles on infected tomato. Hence, this parasitic flowering plant seems to depend upon its host in its requirements for IAA, in a source to sink relation-ship.

• 비파괴검사학회지
• /
• 제30권4호
• /
• pp.373-379
• /
• 2010

EMAT는 비접촉식 탐촉자인 동시에 모드 선택성이 우수하여 다양한 분야에 적용되고 있으나 근본적으로 에너지 전환효율이 낮아 신호 대 잡음비의 증가에 한계를 보인다. EMAT에 위상배열 기술을 접목하면 초음파의 집속 효과를 얻을 수 있으므로 낮은 전환효율의 문제를 극복하기 위한 하나의 해결방안이 될 수 있을 것으로 판단한다. 본 연구에서는 위상배열 EMAT에 대한 기초연구로 3~4개의 코일로 구성되는 표면파 및 수직횡파 발생용 위상배열 EMAT를 제작하고 각 요소코일에 공급하는 펄스의 지연으로부터 위상배열의 효과를 확인하고 방향특성을 측정하였다. 또한 시험편의 표면에 0.5 mm 깊이의 표면결함과 시험편 내부에 직경 0.5 mm의 측면 드릴 홀을 가공하여 제작된 위상배열 EMAT로 결함 신호를 검출하였으며, 이로부터 제작된 EMAT의 성능을 평가하였다.

• Applied Microscopy
• /
• 제25권1호
• /
• pp.1-14
• /
• 1995

The purpose of this study was to investigate the main sensory trigeminal nucleus in the aging rat brain by means of electron microscope. Male Sprague-Dawley rats, two (control group) and thirty six (aging group) months of age, were used. These animals were sacrificed by perfusion fixation with 2.5% glutaraldehyde-2.0% paraformaldehyde (0.1M phosphate buffer, pH 7.4) under sodium pentobarbital. The objective area was punched out with a sharp-edged metal cylinder of 0.8 mm in diameter. These blocks of tissue were then washed in 0.1M phosphate buffer, postfixed in 2% osmium tetroxide, dehydrated in a graded series of ethyl alcohol, and embedded in Epon 812. Thin sections were cut with Super Nova ultramicrotome, pick up on grids and double stained with lead citrate and uranyl acetate, and observed in JEOL 100B electron microscope. The results were as follows: 1. In the control group, the neuronal cell body of the main sensory trigeminal nucleus was filled with nucleus, Golgi complex, Nissl substance, mitochondria, microfilaments and microtubules. However, few Nissl substances are seen in neuronal cell body. Axoaxonic synapse, axodendritic synapse, axosomatic synapse, axospinous synapse, myelinated and unmyelinated nerve fibers were well organized around cell bodies. Neurons with abnormal changes were not seen. 2. In the aging group, the neuronal cell body of the main sensory trigeminal nucleus contained large number of lipofuscin granules, dense body and swollen mitochondria. Terminal boutons contained glycogen, crystal-like vesicle and membranous indicating first signs of degeneration. The dendrites were found to be in synaptic contact with altered axon terminals. Frequently axons filled with dark axoplasn and splitted myelin sheath were noticed.

• 대한의용생체공학회:의공학회지
• /
• 제26권3호
• /
• pp.139-144
• /
• 2005

An implantable microphone that can be utilized as part of a totally implantable hearing aid is designed and implemented. The proposed microphone is implanted in the center of the pinna, and designed to ensure the speech frequency range and the appropriate sensitivity. The characteristics of the proposed microphone are evaluated using a finite element analysis (FEA). The microphone is composed of a small electric condenser microphone, titanium case 6.2mm in diameter and 3mm high, and $10{\mu}m$ SUS316L vibrating membrane in contact with hypodermic tissue to maintain the sensitivity of the microphone. The microphone components are all made of biocompatible materials, then the assembled microphone is hermetically sealed using a polymer and ceramic. Experiments with the fabricated microphone confirm an operational bandwidth of up to 5kHz without any decline of sensitivity in 6mm of hypodermic tissue.