• Proceedings of the Korean Society For Composite Materials Conference
• /
• 1999.04a
• /
• pp.29-33
• /
• 1999

this paper concerned with the stress analysis of a diaphragm-type air spring which consists of rubber linings nylon reinforced rubber composite. The analysis is carried out with a finite element method developed to consider the orthotropic properties geometric non-linearity and contact between an air bag and a bead ring The material properties are evaluated with the Halpio-Tsai equations and the rule of mixture. The analysis results demonstrate the variation of the outer diameter the fold height and the vertical force with different models to the design a proper diaphragm air springs.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.04a
• /
• pp.19-22
• /
• 2009

It is essential to predict the deformed roll profile for the prediction of the strip profile in rolling process. The work roll of the Sendzimir mill has a small diameter in comparison to a barrel length, so that it is well deformed by the rolling pressure. Also it has a complex roll system, so it is difficult to analyze the roll deflection. In this paper, 3D finite element method is used for the analysis of the roll deflection of the Sendzimir due to the contact between rolls. But it takes much time to get the results, so that the on-line model to evaluate the radial deformation of a roll is developed on the basis of the finite element method.

• KSTLE International Journal
• /
• v.7 no.2
• /
• pp.51-55
• /
• 2006

In order to design an effective foot surface which can provide adequate friction for a self-propelled medical microrobot moving inside the small intestine, frictional mechanisms between the small intestine inner wall and the foot surface of the robot must be understood. In this paper, mechanical interlocking effect was considered to design the surface of the foot that can generate the desired frictional force. The concept of the design was derived from the hookworm that lives inside the small intestine. Hookwarms are known to adhere to the small intestine wall by interlocking with villi on the surface of the small intestine. The interlocking mechanism was considered as the main frictional mechanism for the design of the microrobot foot surface in this work. 2 mm and 6 mm diameter solid and hollow cylindrical shaped foot specimens were designed and tested to assess the frictional force between the specimens and the porcine small intestine specimen.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.3
• /
• pp.105-109
• /
• 2001

In this paper, the windmill type ultrasonic motors with 11.35 mm diameter, 2.87 mm thickness of metal endcap and 1.47 g weight were fabricated. Effects of slots and thickness on torque characteristic in the windmill type ultrasonic motor were investigated, when stator's slots were changed from 4, 6, 8 and thickness 0.15 mm, respectively. Specially designed metal endcaps with windmill shaped cutting can provide longitudinal and torsional displacements simultaneously as the ceramic disk vibrates radically. The windmill type ultrasonic motor has only three components: a stator element with windmill shape slotted metal endcap, a rotor and bearing. Ultrasonic motor stimulated to ultrasonic oscillations by piezoelectrics to drive a rotor via friction contact. The ultrasonic motor fabricated here was the windmill type ultrasonic motor operated by single-phase AC source. Bidirectional revolution using single-phase high frequency for driving the ultrasonic motor was presented.

• Journal of ILASS-Korea
• /
• v.12 no.4
• /
• pp.198-203
• /
• 2007

In the present work, surface wetting effect on spread-splash regime and transition criterion of the water and ethanol droplets impacting an unheated dry wall has been experimentally investigated. The droplet was directed on a polished STS plate and a glass slide, and the impinging behavior was visualized and recorded using a CCD camera. Droplet diameter and velocity approaching the wall were measured as well. The critical Sommerfeld number representing the spread-splash boundary for the ethanol droplet impinging on the substrates turned out to be smaller compared to that for the water droplet impinging on the substrates with the surface roughness condition remained unchanged. The shift of the transition boundary is considered to be due to the effect of the surface wettability represented by static contact angle and surface tension of droplet.

• Applied Microscopy
• /
• v.26 no.4
• /
• pp.421-430
• /
• 1996

The endocrine cells in the midgut epithelium of the Japanese cockroach, Periplaneta japonica were observed by the light and electron microscopy. The midgut epithelium of the last instar larva and adult cockroach consisted of principal columnar cells, regenerative cells, and secretory granular cells. Midgut endocrine cells were positioned basally as a cone-shaped single cell in the epithelium or underneath the regenerative crypt cells. When midgut epithelium grows and the cell composing it transforms, between the endocrine cells and regenerative cells were made desmosome type junction and large vesicular shaped stretches of loose contact. The endocrine cells were characterized by a clear cytoplasm with abundant Golgi complex and numerous secretory granules. The secretory granules in the cell were spherical and electron dense with their diameter of $200{\sim}400nm$. The secretory granules have been observed as discharged by exocytosis on the basal and lateral side of the cell.

• International Journal of Railway
• /
• v.7 no.1
• /
• pp.1-7
• /
• 2014

Fatigue and wear in wheels is often due to the forces and loading. These certainly have fundamental effects on reducing the wheel life and increasing the costs related to repairing and maintenance. Modeling and stress analysis of a wheel sample existing in the Iranian fleet have been performed in its contact with U33 and UIC60 rails. The results have been reviewed and analyzed in elastic and elastic-plastic phase and under static (railcar weight) and quasi static loads. Moreover, effects of wheel diameter, axle load, wheel material, rail type are analyzed.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.10a
• /
• pp.84-86
• /
• 2007

Aluminum sheets were asymmetrically cold rolled without lubrication by using different roll velocities of upper and lower rolls in order to intensify the shear deformation. During asymmetrical cold rolling of aluminum sheets, a reduction per a rolling pass, initial sheet thickness, roll diameter, roll velocity ratio were varied to investigate the effect of rolling parameters. The formation of through thickness shear texture was related to the ratio of the contact length between the roll and sample($l_c$) to the sheet thickness(d). The strain states associated with asymmetrical rolling were investigated by the finite element method (FEM) simulation. FEM results indicated that the evolution of deformation texture in a thickness layer is strongly governed by integrated values of strain rates $\dot{\varepsilon}_{13}$ and $\dot{\varepsilon}_{11}$ along the streamline in the roll gap.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.395-395
• /
• 2013

GaN는 LED, 태양전지, 그리고 전자소자 등에 쓰이는 물질로, 관련 연구가 활발히 진행되고 있으며, 이와 더불어 top-down방식을 활용한 소자제작 방법 또한 발달되고 있다. 하지만, 일반적으로 LED 제작에 사용되는 c-plane GaN의 경우, c축 방향으로 발생하는 분극의 영향을 받게되며, 분극은 LED내 양자우물의 밴드를 기울게 하여 전자와 홀의 재결합률을 감소시켜 낮은 내부양자효율을 야기한다. 이러한 문제를 해결하기 위해 여러 가지 방법들이 제시되었으며, 그 중에서도 a면, 혹은 m면과 같은 nonpolar면을 사용하는 GaN LED가 주목받고 있다. 본 연구에서는, top-down방식을 통해 약 $2{\mu}m$ 크기의 diameter를 갖는 micro-sized column LED를 구현하였으며, 식각 후 드러나는 semipolar면을 wet treatment를 통해 제거하여 nonpolar면을 드러나게 하였으며, 이 면에 Ni/Au를 contact하여, 전기적, 광학적 특성을 논하였다. Fig. 1은 I-V 특성 그래프이며, Fig. 2는 EL측정 결과(광학적 특성)이다.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.910-911
• /
• 2006

We newly designed and manufactured a new arranging system for a three-dimensional artificial crystal of monosized micro particles. In this system, a robotic micro-manipulator accurately locates the spherical particle onto the lattice point, and subsequently fiber lasers micro-weld the contact points between the neighboring particles. Actually, one- and two-dimensional arrays were constructed using monosized tin particles with the diameter of 400 m. Moreover, due to optimization of the process parameters, we successfully constructed the artificial crystals of simple cubic and diamond structures. In particular, the diamond structure which can represent a large photonic band gap is expected to progress toward a practical photonic crystal device.