• 한국안광학회지
• /
• 제10권3호
• /
• pp.165-171
• /
• 2005

본 연구는 단백질 침착에 의한 소프트콘택트렌즈의 직경 및 곡률반경의 변화를 밝히기 위해 수행되었다. 소프트콘택트렌즈를 인공누액 및 누액과 동일한 조성의 단백질 용액에서 2분, 10분, 30분, 1시간, 3시간, 6시간, 12시간, 24시간 담가둔 후, 고속촬영기(Fastcam ultima 1024)로 촬영하여 직경 및 곡률반경을 측정하였다. 인공누액에 오랫동안 담가둔 소프트콘택트렌즈일수록 소프트콘택트렌즈의 직경과 곡률반경의 변화가 컸다. 단백질만을 침착시킨 소프트콘택트렌즈의 경우도 유사한 양상이 나타나 직경 및 곡률반경이 감소하였다. 그러나 칼슘이온의 영향은 단백질에 비해 미약한 것으로 나타났다. 이상의 결과로 누액 단백질로 인하여 소프트콘택트렌즈의 직경 및 곡률반경이 감소되며, 이러한 결과는 렌즈 착용 후의 착용감저하와 관련이 있을 것으로 여겨진다.

• 한국의류학회지
• /
• 제15권4호
• /
• pp.437-445
• /
• 1991

The effect of diameter of rods or fibers on contact angle was studied in a vertical rod configuration. A contact angle measuring device described in the previous paper was optimized for the measurement of small-diameter fibers. It was shown that contact angles of water and hexadecane on nylon 6 monofilsments and glass rods increased with decrease of diameter below a critical diameter, which varied from one system to another. Beyond the critical value, contact angle of the liquid on the vertical glass rod reached to an equilibrium value which is equal to the unique value of the contact angle of the liquid drop on the horizontal glass plate.

• 대한기계학회논문집
• /
• 제7권3호
• /
• pp.313-318
• /
• 1983

It is required in designing a spot welding to get in advance an estimated figure of nugget diameter. A method of estimating nugget diameter of low carbon steel sheets is suggested in tesms of utilizing elastic calculation in theory and of making a sectional observation of specimen of spot welding in experiment. The resultant findings are summarized as follows: 1) A contact diameter of sheet, 2.gamma.$_{o}$=d sub e/+(1.1)t, wheer de is the electrode tip diameter and t is the thickness of sheets. 2) The practical measurement of the nugget diameter reveals that $d_{n}$=(1.05) $d_{e}$+(0.9)t, and $d_{b}$ is less by 0.8-4.3% than 2.gamma.$_{o}$. 3) The more $d_{n}$ is as compared with t, the less the difference between a theoretical value and an experimental value is. 4) In the spot welding of thin steel sheets less than 3mm in thickness that are commonly used in sheet metal works, the contact diameter equals the nugget diameter. In this case, either the theoretical or experimental approach can be used for estimating the nugget diameter.meter.ter.r.

• Nuclear Engineering and Technology
• /
• 제55권4호
• /
• pp.1269-1279
• /
• 2023

Pool boiling experiments are performed within an isolated bubble regime at inclination angles of 0° and 45°. When a bubble grows and departs from the heating surface, the pressure, buoyancy, and surface tension force play important roles. The curvature and base diameter are required to calculate the pressure force, the bubble volume is required to calculate the buoyancy force, and the contact angle and base diameter are required to calculate the surface tension force. The contact angle, base diameter, and volume of the bubbles are evaluated using images captured via a high-speed camera. The surface tension force equation proposed by Fritz is modified with the contact angles obtained in this study. When the bubble grows, the contact angle decreases slowly. However, when the bubble departs, the contact angle rapidly increases owing to necking. At an inclination angle of 0°, the contact angle is calculated as 82.88° at departure. Additionally, the advancing and receding contact angles are calculated as 70.25° and 82.28° at departure, respectively, at an inclination angle of 45°. The dynamic behaviors of bubble growth and departure are discussed with forces by pressure, buoyancy, and surface tension.

• 대한기계학회논문집
• /
• 제11권6호
• /
• pp.935-944
• /
• 1987

본 연구에서는 금속 표면의 정밀가공법을 연구대상으로 하여 구상흑연주철시 편을 미량의 테이퍼로 연삭가공하고 NACHI 6000ZZ 볼 베어링을 로울러로 사용하여 로 울러 다듬질을 행함으로써 로울러 지름 변화에 따른 가압력이 표면조도에 미치는 영향 을 구명하는데 목적을 두었으며 아울러 로울링(rolling)회수에 따른 펴면조도, 경도 및 직경의 변화량을 실험적으로 구명하였다.

• 한국정밀공학회지
• /
• 제25권5호
• /
• pp.69-76
• /
• 2008

Inner diameter of bearing race is automatically measured by complete inspection system after grinding process. Contact type three points supporting method is widely applied to automatic inner diameter measurement because of its excellent stability. However, the geometric consideration regarding three points supporting method is not sufficient. In this study, the error equation from geometric error analysis of three points supporting method is found. The effect of factors in the error equation is also investigated. The error equation is linear for difference of diameter in sample and master on range of tolerance. An error becomes more and more larger, when the distance of two supporting balls or the diameter of supporting ball are increased. In the result, some considerations are proposed for measurement of inner diameter by the three points supporting method.

• 소성∙가공
• /
• 제18권8호
• /
• pp.607-616
• /
• 2009

There are three sub-processes associated with the assembly of the valve seat and cylinder head; heat fitting, cold fitting, and shrink fitting. In the heat fitting stage, the cylinder head is heated to a specified temperature and then squeezed toward the outer diameter of the valve seat. The cold fitting process cools the valve seat and safely squeezes it toward the inner diameter of cylinder head. However, these methods increased the installations & running cost and curtailed productivity. To address these problems, we analyzed the shrink fitting process using the contact pressure caused by fitting interference between the outer diameter of the valve seat and the inner diameter of the cylinder head. In this study, a closed form equation for predicting the contact pressure and fitting load is proposed. For quality control of the assembly line, principal factors of the shrink fitting process influenced in contact pressure were simulated by the FEM. Actual loads measured in the field showed good agreement with the results obtained by theoretical and finite element analysis.

• 한국광학회지
• /
• 제16권3호
• /
• pp.177-181
• /
• 2005

원통형 물체의 지름을 측정하는 방법에는 여러 가지가 있지만 본 연구에서는 두 가지 비접촉식 방법인 기하광학적 방법과 간섭${\cdot}$회절 방법으로 원통형 물체의 지름을 측정하였다. 기하광학적인 방법은 원통형 렌즈를 이용하여 기울인 레이저 광선을 원통형 물체의 옆면에 비추어 나타나는 곡선을 CCD 카메라로 포착하고 이 곡선을 기하학적인 방법으로 계산하는 것이며 간섭${\cdot} $회절에 의한 방법은 스크린에 나타난 물체에 의한 레이저광의 간섭${\cdot}$회절무늬를 측정하고 분석하는 방법이다. 버니어 캘리퍼스로 측정한 평균 지름이 $0.05\;mm\;\~\;100.50\;mm$ 인 원통형 물체를 기하광학적 방법과 간섭${\cdot}$회절 방법으로 측정한 결과 각각의 상대오차가 $2\%$ 와 $1\%$범위 이내였고 다량의 물체 지름을 신속히 측정하는데 응용될 수 있음을 확인하였다.

• 펄프종이기술
• /
• 제35권3호
• /
• pp.43-52
• /
• 2003

The new principle to measure a sizing degree by a contact angle was developed using an automatic determination of the 3-end point coordinates of the water droplet on a sheet, which could diminish the operator's bias during measurement. A constant amount of water was first placed on a sample sheet by a water dispenser, and then an image of the liquid droplet was captured by a digital camera and then transmitted to a computer. The program measuring for contact angle extracted a liquid contour by Gaussian function combined with a 8-direction chain code. The Euclidean equation was applied to the binary image of the liquid contour in order to measure the diameter of the contour. Finally, the contact angle of the liquid was calculated by using the diameter and the top coordinates. In addition, a surface free energy of the sample sheet and an elapsed time taken up to the complete absorption into the sheet were simultaneously measured with the contact angle.

• Applied Microscopy
• /
• 제8권1호
• /
• pp.53-66
• /
• 1978

An attempt has been made to discriminate the synapses in the striatum consisting caudate nucleus, putamen and fundus striati of the cat with emphasis on the characteristic structures of axon terminals and postsynaptic profiles. The differentiation is based on the size and shape of vesicle in the bouton terminal, and the symmetrical or asymmetrical thickening the pre- and postsynaptic membrane. Four types of synapses could be differentiated: Type I: the bontons with asymmetrical,synaptic thickenings contain round 45 nm diameter vesicles and contact cell soma, dendritic shafts and dendritic spines (74%). Type II : the boutons contain round 45nm diameter vesicles and are associated with symmetrical membrane thickenings. These synapses are formed on the soma and dendritic shafts (6%). Type III: the boutons with symmetrical membrane thickenings contain 50-60 nm diameter pleomorphic vesicles, and contact soma and dendritic shafts (18%). Type IV: the terminals contain flattened vesicles ($25{\times}45 nm$) and are associated with symmetrical membrane thickenings. These synapses are found in contact with soma and dendritic shafts. Additionally, the bouton en passant, which is expanded from myelinated or unmyelinated axons containing round vesicles (45nm diameter) contacts the dendritic shaft or dendritic spine with asymmetrical membrane thickenings. Two unusual types of synapses, axo-axonic and dendro-dendritic, are found occasionally.