• Journal of Drive and Control
• /
• v.21 no.2
• /
• pp.44-52
• /
• 2024

In this study, we predicted PTO power requirements based on torque predicted by the discrete element method and the multi-body dynamics coupling method. Six different scenarios were simulated to predict PTO power requirements in different soil conditions. The first scenario was a tillage operation on cohesionless soil, and the field was modeled using the Hertz-Mindlin contact model. In the second through sixth scenarios, tillage operations were performed on viscous soils, and the field was represented by the Hertz-Mindlin + JKR model for cohesion. To check the influence of surface energy, a parameter to reproduce cohesion, on the power requirement, a simple regression analysis was performed. The significance and appropriateness of the regression model were checked and found to be acceptable. The study findings are expected to be used in design optimization studies of agricultural machinery by predicting power requirements using the discrete element method and the multi-body dynamics coupling method and analyzing the effect of soil cohesion on the power requirement.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.10a
• /
• pp.278-283
• /
• 2000

As information communication technology developed we could check our blood pressure, pulsation electrocardiogram, SpO2 and blood test easily at home. To check our health at ordinary times is able though interlocking the house medical instrument with the wireless public data network This service will help the inconvenience to visit the hospital everytime and will save the individual's time and cost. In each house an organism data which is detected from the human body will be transmitted to the distance hospital and will be essentially applied through wireless public data network The medical information transmit system is utilized by wireless close range network It would transmit the obtained organism signal wirelessly from the personal device to the main center system in the hospital. Remote telemetry system is embodied by utilizing wireless media access protocol. The protocol is embodied by grafting CSMA/CA(Carrier Sense Multiple Access with Collision Avoidance) protocol falling mode which is standards from IEEE 802.11. Among the house care telemetry system which could measure blood pressure, pulsation, electrocardiogram, SpO2 the study embodies the ECC(electrocardiograph) measure part. It within the ECC function into the movable device and add 900㎒ band wireless public data interface. Then the aged, the patients even anyone in the house could obtain ECG and keep, record the data. It would be essential to control those who had a health-examination heart diseases or more complicated heart diseases and to observe the latent heart disease patient continuously. To embody the medical information transmit system which is based on wireless network. It would transmit the ECG data among the organism signal data which would be utilized by wireless network modem and NCL(Native Control Language) protocol to contact through wireless network Through the SCR(Standard Context Routing) protocol in the network it will be connected to the wired host computer. The computer will check the recorded individual information and the obtained ECC data then send the correspond examination to the movable device. The study suggests the medical transmit system model utilized by the wireless public data network.

• Polymer(Korea)
• /
• v.36 no.6
• /
• pp.810-815
• /
• 2012

The cation exchange polymer, poly(styrene sulfonic acid) (PSSA), was coated onto polyamide (PA) thin film composite reverse osmosis (RO) membranes. Then these membranes were investigated for the model foulants, bovine serum albumin (BSA), humic acid (HA), and sodium alginate (SA) to check whether there are some improvement. The contact angle of PSSA coated PA RO membrane showed $58^{\circ}$ from $78^{\circ}$, the value of PA RO membrane, which confirmed successful hydrophilization. As the operating pressure increased (2, 4, 8 atm for BSA, HA and SA 100 ppm in feed solution), the fouling phenomena was worse for both none- and PSSA-coated membranes. The fouling increased in the order of BSA>SA>HA due to the interactions between sulfonic acid in PSSA and functional groups of foulants. On the other hand more significant fouling reduction was observed in the order of HA>SA>BSA. The photographs of scanning electron microscopy showed the same trend. As a result, there was the improvement of fouling phenomena for the PSSA coated RO membranes, distinctly in the case of HA.

• Archives of design research
• /
• v.16 no.3
• /
• pp.241-252
• /
• 2003

Currently while a phase of the Internet as an advertising media is firm, and Internet advertisement utilization of a company rises, and the consumers contact with various Internet advertisements. A lot of Internet advertisements of various forms made with new technology to develop rapidly are executed and will disappear again. Now, It is necessary to classify various types of the Internal advertisement which was made by a sharp environment change, and was tested of the last ten years and to classify expression techniques systematically. At the same time, we have to check a development direction of domestic Internet advertisement and trend. It is a point of time that Internet advertisement must be designed in a macroscopic dimension like the four medium advertisement by an advertisement strategy and an expression strategy. In this paper, first I classified a type of domestic Internet advertising into marketing, an advertisement purpose, an expression form, manufacture technology, and an express on method systematically in five sides so far And I tried to consider the form and characteristics. By next time, while examine change of internet marketing paradigm, I checked trend of recently domestic Internet advertising in accord to a change of consumer's use tendency and a change of Internet advertisement manufacture technology, and tried to consider the development course in the marketing side, the manufacture technical side, and the creative side. Finally, I wish to propose necessity of expression strategy establishment to promote development of the interactive advertisement technique that considered the creative side in order to raise an effect of Internet advertisement.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.4
• /
• pp.233-238
• /
• 2012

Purpose: To evaluate the effect of silvernanopartilce treated implants on the bone formation and osseointegration. Methods: Silvernanoparticle was produced using an anodic oxidation method. The size of silvernanoparticle ranged from 3.5 nm to 5.9 nm. To check the effect of the capability of osseointegration of silvernanoparticle coated Implant, 32 implants (16 piece of Implant treated with nanoparticle, and 16 piece of Implant was not treated for control) were placed at both the tibia of 8 New Zealand white rabbits. After 4 weeks, 4 rabbits were sacrificed and the removal torque was measured for comparison of the osseointagration ability. Further, 4 rabbits were sacrificed and sliced samples were made. H&E stain was done for microscopic finding. Results: The removal torque of the experimental group was $102.37{\pm}30.54$ N/cm, and the control group was $73.30{\pm}19.97$ N/cm. It was statistically significant (P<0.001). Microscopic finding also shows extinguish results in silvernanoparticle treated implants. Bone formation rate of the experimental group was 43.94% and the control group was 7.58%. It was observed to be statistically significant (P=0.017). Bone to implant contact rate of the experimental group was 58.09%, and the control group was 19.43%. It was found with statistical significance (P<0.001). Conclusion: The silvernanopartilce treated implant shows a better capability of bone regeneration and osseointegration than the non-treated one. Technology to produce smaller particles would make silver more useful and safer.

• Journal of the Korea Concrete Institute
• /
• v.24 no.5
• /
• pp.553-558
• /
• 2012

Airborne chlorides are transported to inland by sea wind to be attached to seashore concrete structure surface then penetrated into concrete structure members. Since the surface attached chloride amount are dependent on the amount of airborne chlorides, the prediction of distribution of airborne chlorides is important information in preventing chloride corrosion problems in seashore concrete structures. The prediction of surface chloride amount from airborne chlorides environment is extremely difficult than concrete directly in contact with seawater. In addition, their penetrating tendency is different from that of concrete immersed in seawater. In this study, properties of surface and penetrated chlorides under airborne chlorides environment are investigated. Concrete specimens were manufactured and exposed to marine environment for 3 years. The specimens were analyzed at the time durations of 1, 2, and 3 years to check surface chloride amount to penetrated chloride depth. The results revealed that there were certain differences according to surface roughness of concrete and with and without washing effect due to rainfalls. The evaluation results showed that penetrated chlorides depend on amount of airborne chlorides and duration of exposure. In addition, a notable tendency of having deeper chloride penetration and higher chloride content in concrete members under long-term exposure was observed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.329-331
• /
• 2018

In this paper, we propose a monitoring system that starts with the supply of raw materials for threading, is processed into a lathe machine, and checks for defects of the product are automatically performed by the robot with Smart Factory technology through assembly and disassembly. Completion check according to the production instruction quantity and production instruction is made by checking the production status according to whether or not the raw material is worn by the displacement sensor, and checking the pitch and the contour of the processed female and male to determine OK and NG. The robotic system acts as a relay for loading and unloading of raw materials, pallet transfer, and overall process, and it acts as an intermediary for organically driving. The location information of the threaded products is collected by using the non-contact wireless tag and the energy saving system Production efficiency and utilization rate were checked. The environmental sensor collects the air-conditioning environment data (temperature, humidity), measures the temperature and humidity accurately, and checks the quality of product processing. It monitors and monitors the driving hazard level environment (overheating, humidity) of the product. Controls for CNC and robot module PLC as a heterogeneous system.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.5
• /
• pp.251-260
• /
• 2002

Geotextile tribes are made of sewn geotextile sheet and hydraulically or mechanically filled with dredged materials. They have been applied in hydraulic and coastal engineering in recent years(shore protection structure, detached breakwater, groins, and jetty). Therefore, it is composed of geotextile and confined fill material. Recently, new preliminary design criteria supported by model and prototype tests, and some stability analysis calculations have been studied. The stability analysis of geotextile tube is composed of geotechnical and hydrodynamic analysis. The stability check points are sliding failure, overturning, bearing capacity failure against the wave attack. In this paper are presented the stability analysis method by empirical equation and 2-D equilibrium analysis for geotextile tube. Also, the hydraulic model tests were performed to verify the theoretical stability analysis with geotextile tube shape, filling ratio, significant wave height, and so on. The results of this study show that the stability of geotextile tube depends on the tube shape, contact area, projection area. The theoretical analysis and hydraulic model test show almost the same results.

• Journal of Korean Home Economics Education Association
• /
• v.27 no.2
• /
• pp.53-75
• /
• 2015

In the modern society, the adolescence needs the career development competency which makes them probe changing social phenomenon critically and use the given environment and resources progressively. Thus, adolescence should be offered with the career development competency education, but the education in the school fields remains as school entrance coaching focusing on the academic clique and career coaching as a mere job education. As a result, the study connection between high school and university was destroyed and it caused students' study-unfitness and dropouts after the university entrance. Hence, career education to culture major suitability of high school students in the new paradigm should be developed through high school-university connection. So, this study developed a career education program through the collaboration among the professor of college of human ecology, a home economics specialist, undergraduates majoring in human ecology, and a high school student, using the ADDIE model. The result of this study is as followed. First, this study searched for the direction of the program for the career development competency reinforcement of high school students. Second, the program arranged the newest issues of each department of human ecology to make high school students come in contact with and study them easily, aiming at cultivation of major suitability of high school students. Third, the study established the teaching-learning materials that is managed by the high school-college of human ecology committee. Fourth, this program will be the good opportunity for students who are interested in departments of human ecology to check their major suitability.

• Korean Journal of Community Nutrition
• /
• v.14 no.6
• /
• pp.817-830
• /
• 2009

The purpose of this study was to analysis the sanitary management performance based on HACCP system for school foodservice. This study was carried out from September 2008 until December 2008 and is targeted towards schools' dietitians that work at schools with school foodservice. The regional distribution of this research is as follows; 377 schools in Seoul, 648 schools in Gyeonggido, 160 schools in Kangwondo, 438 schools in Choongchungdo equaling 1,623 schools in total. When school foodservices were put through sanitation management achievement level analysis applied by the HACCP system, results displayed that management of temperature (3.96 points), time (4.08 points), and cross-contamination (4.07 points) were all below the average achievement level. HACCP system's achievement level based on the TQM showed that areas for strategy development, leadership, information and analysis had low achievement levels. Achievement levels for CCP are quality check, delivery/distribution process, sterilization/cleansing of food's contact surface. As a result of multiple regression analysis of the factors that influenced sanitation management achievement level of school foodservice HACCP system; sanitary job standard showed 35.6% and CCP achievement levels showed 26.8% explanatory rate. In particular, Kangwondo's number of foodservice provided to per cook was small. Also, the better the processing management was assessed, the higher the sanitary job standard achievement level became resulting to a explanatory rate of 39.5%. Elementary schools showed a higher explanatory rate of 37.0% than middle and high schools. CCP achievement levels in middle and high schools with self-operated foodservice had a 28.0% variable explanatory rate, which was the highest. The better the drainage system, leadership and assessments turned out to be, the higher the CCP achievement levels became. In summary, to revitalize HACCP system that is based on the TQM, it is considered that proper database of HACCP system for school foodservice's sanitation management be constructed and more emphasis should be put on strategy development to improve customers' satisfactory level. In addition, improvements in achievement levels of time, temperature, and cross-contamination for sanitary job standard and CCP achievement level are essential.