• Culinary science and hospitality research
• /
• v.7 no.2
• /
• pp.195-215
• /
• 2001

This study is of an analysis of the kinds of influences on the subordinate variables through the adjusting variables by the independent variables which serve as the perception factor of job stress. also This study, with taking the workers for the hotel employees who are in the room, food & beverage and cook, was carried out so as to analyze deeply and throughly the stress of work they experience in doing their job and the tension incited from this stress and the strategy used for meeting this stress to grope for raising plan for the degree of satisfaction with their job of the workers for the hotel. In order for, this study ran paralled with literature study and research study, taking 615 workers who are now working in hotel. Job stress is easily negligible in hotel business not only because it is hard to identify and measure its concrete entity on account of its intangible characteristic but also because it is impossible to check physically the relationship with each direct behavior. If job stress continue, however, it can cause neglect of duty, change of occupation, deterioration of service quality and eventually aggravate the cost of a hotel business and decrease the hotel sales. Consequently, it is highly necessary to increase job satisfaction by identifying systematically and eliminating the stress factor of hotel employees in order to accomplish particularly experience unique job stress in the course of contact since they should provide the customer with their services.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.10
• /
• pp.134-140
• /
• 2008

In this paper an Investigation into the actual condition of electrical equipments installation & management and check the problem of application to IEC60364 in korea construction by the electrical installation technical regulation. building equipments by the electrical installation technical regulation are almost same TT system but the electrical installation technical regulation does not contact with protective conductor(PE conductor). This study derive a problem and resent the solving method of problem causing does not fully understand of IEC60364, mix electrical installation technical regulation and IEC60364 by the actual condition of electrical equipments installation & management in korea.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2003.05a
• /
• pp.214-225
• /
• 2003

Now a day, the company must strengthen the contact-point of the customer who the company has and has to block the secession of the customer by providing services or goods on time. Under this market situation, the corporation extends the CRM for the customer management and strategic management, and set the CRM-strategies up for managing the customer relationship. For this, the present enterprise's level and the business-ability for the management of the customer relationship should be considered. Therefore, in this study, we will analyze the critical factors to set the CRM up as a strategy by studying the literature review. In the critical factors, the factors of enterprise level as well as the technical factor will be included. Secondly, as you know, the BSC is used to evaluate the corporation as a index. In this study the BSC model is changed and rearranged for the applied BSC model to measure the C3M level of companies. Thirdly, based on the model developed, the factors in the first step are classified by levels and weighted values are calculated by using AHP method. As a result, we will show the diagnostic model for check the operational performance of management, marketing and sales etc.

• Earthquakes and Structures
• /
• v.3 no.3_4
• /
• pp.549-561
• /
• 2012

Many building foundations are embedded, however it is not easy to compact the backfill around the foundation especially for the deeply embedded ones. The soil condition around the embedded foundation may affect the seismic response of a building due to the weak contact between the soil and the foundation. In this paper, the response accelerations in the short-period range and at the period of 1 second (in the long-period range) for a seismic design spectrum specified in the IBC design code were compared considering perfect and poor backfills to investigate the effect of backfill compaction around the embedded foundation. An in-house finite-element software (P3DASS) which has the capability of horizontal pseudo-3D seismic analysis with linear soil layers was used to perform the seismic analyses of the structure-soil system with an embedded foundation. Seismic analyses were carried out with 7 bedrock earthquake records provided by the Pacific Earthquake Engineering Research Center (PEER), scaling the peak ground accelerations to 0.1 g. The results indicate that the poor backfill is not detrimental to the seismic response of a building, if the foundation is not embedded deeply in the soft soil. However, it is necessary to perform the seismic analysis for the structure-soil system embedded deeply in the soft soil to check the seismic resonance due to the soft soil layer beneath the foundation, and to compact the backfill as well as possible.

• Proceedings of the KSR Conference
• /
• 1999.11a
• /
• pp.333-343
• /
• 1999

When a high speed train enters a tunnel, wind speed passing through the train in a tunnel section becomes higher due to the reverse flow to the direction of the train. The higher wind speed gives more aerodynamic forces to the pantograph on the train. Therefore, it is necessary to perform aerodynamic and dynamic analyses in order to check whether the current collection of the high speed train, entering the tunnel, still remain permissible or not. In this paper, the aerodynamic analysis has been performed under the assumption that a high speed train at 300 km/h enters a tunnel whose cross sectional area Is 107/㎡ and length is 1000m. In consideration of the aerodynamic analysis results, the dynamic analysis has been performed based on the catenary and pantograph dynamic models in SEOUL-PUSAN high speed rail, using the GASENDO developed by RTRI. In addition, the fatigue life of the contact wire has been reviewed using the Goodman diagram. Based on the analysis results, it is concluded that the increase of the aerodynamic forces on the pantograph in the tunnel section shall not affect characteristics of current collection adversely except that motions of the pantograph may be constrained by bump-stops.

• International Journal of Internet, Broadcasting and Communication
• /
• v.14 no.4
• /
• pp.198-205
• /
• 2022

Along with a variety of coding education, physical computing education for controlling various sensors is being actively conducted for elementary, middle, and high school students in line with the era of the fourth industrial revolution. A problem with physical computing education using Arduino is pin connection errors between Arduino and various sensors. Most of the students who come into contact with the Arduino for the first time often do not know the purpose of the Arduino pin and the connection position of the pin. Also, hardware built with incorrect pin connections to the Arduino board often does not work properly. If this case continues, students will lose interest in coding education. Therefore, in this paper, we implemented an augmented reality application that informs the connection process of the Arduino board and the sensor during physical computing coding education using Arduino, and designed and implemented educational content for the Arduino pin position and connection process. First, we explain the role of the Arduino board and the sensor and the location of the pins. After that, the students run the educational augmented reality educational content using their smartphones and check the correct pin connection process between the Arduino and the sensor. In the physical computing education, augmented reality content is used to increase the understanding and immersion of the class. It is expected that the educational effect will also increase by inducing fun and interest in physical computing coding education.

• Journal of the Korean Society for information Management
• /
• v.41 no.2
• /
• pp.131-154
• /
• 2024

This study aims to check the effectiveness of 'diligent search' stipulated in Article 35-4 of the Copyright Act of Korea. 'Diligent search' is to identify the copyright holder and his or her contact information. But the process provided by the law includes many cases in which it is practically impossible to identify the relevant details, and includes unnecessary requirements. So it appears that improvement is needed. Based on this, it was proposed to improve the text of the Copyright Act (Article 35-4) and to abolish unnecessary provisions (Article 16-3 no.5~8) of the Enforcement Decree.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.7
• /
• pp.3437-3443
• /
• 2013

The polymer insulators have been extensively used as an alternate material of ceramic insulators. However, when they are used in practical conditions, there are many problems of decreasing performance and shortening lifetime due to the exposures of degradation factors applied from the outdoor situations. Accordingly, the analysis of polymer degradations has been getting influential too late as one of important subjects for improvements of safety and reliability. Heat, water treatments are arbitrary simulated for finding out the initiations and processes of surface degradation on the polymer surface. Especially, this study is focused on the chemical changes properties. From the analysis of hydrophilic and hydrophobic molecular structures, final modeling of surface degradation is accomplished. We checked the contact angle depending on heat and moisturized accelerated degradation and ran an XPS analysis to check the mechanism change of the surface of the PCB polymer composite. The surface that had a tendency to attract moisture showed a decrease in the contact angle and generated a large amount of carboxyl($-COO^*$) radicals. The hydrophobized surface showed an increase in the contact angle and had a stable chemical composition constituted of the breakaway of oxygen radicals and the formation of double bond by carburization.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.711-717
• /
• 2017

The railway is a public transportation system that provides large-scale passenger transportation and service, whose reliability and safety is the top priority. The wiring of railway vehicles is classified into train control lines (train lines) and communication lines. The train lines are used for input / output signals related to vehicle driving and safety functions, and the communication lines are used for the input / output signals for passenger services such as broadcasting. In order to measure the reliability of railway vehicles, a train line is applied to the input / output interface of the control signals between the electric control devices in the vehicle, and there are many electromechanical devices such as relays and contactors for the control logic. In fact, since the vehicle control circuit is composed of several thousand contacts, it is difficult to check for errors such as contact failure, and it is impossible to check the real-time status, so a lot of manpower and time is required for regular maintenance. Therefore, we analyze the current state of the train line design of the electric equipment used for driving and services in domestic railway cars and propose three wiring reduction methods to improve it. Based on the analysis of domestic electric vehicles, it was confirmed that the wiring reduction effect is 35% or more.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.12
• /
• pp.103-111
• /
• 2013

At present, a variety of Korean news stories have been about important online content and its importance in the press is becoming higher. Diverse news from businesses are provided to the public as press releases through newspapers or broadcasting media. For such news to become information for a press release, enterprises visit reporters, use e-mails, faxes, or couriers to deliver the information. However, such methods have problems with time, human resources, expenses, and file damage. Also, with these methods it is bothersome for enterprises to check what has been released and for the press to make frequent contact with enterprises for interviews and for content to be released. Therefore, this study aimed to realize a distribution system which enterprises can use to distribute data to be released to the press and to easily check what is to be released while the press can ask for interview requests in a simple way, as well as a news gathering robot that can collects news on the enterprises involved from articles online or in portal sites.