• Publications of The Korean Astronomical Society
• /
• v.12 no.1
• /
• pp.111-143
• /
• 1997

We have developed a spherical FCT code in order to simulate the interaction of supernova remnants with stellar wind bubbles. We assume that the density profile of the supernova ejecta follows the Chevalier mode1(1982) where the outer portion has a power-law density distribution($\rho{\propto}\gamma^{-n}$) and the SN ejecta has a kinetic energy of $10^{51}$ ergs. The structure of wind bubble has been calculated with the stellar mass loss rate $\dot{M}=5\times10^{-6}M_{\odot}/yr$ and the wind velocity $\upsilon=2\times10^3$ km/s We have simulated seven models with different initial conditions In the first two models we computed the evolution of SNRs with n=7 and n=14 in the uniform medium The numerical results agree with the Chevalier's similarity solution at early times. When all of the power-law portion of the ejecta is swept up by the reverse shock, the evolution slowly converges to the Sedov-Taylor stage. There is not much difference between the two cases with different n's The other five models simulate SNRs produced inside wind bubbles. In model III, we consider the SN ejecta of 1.4 $M_{\odot}$ and the radius of bubble ~2.76 pc so that ratio of the mass $\alpha(=M_{W.S}/M_{ej}$ is 2. We follow the complex hydrodynamic flows produced by the interaction of SN shocks with stellar shocks and with the contact discontinuities, In the model III, the time scale for the SN shock to cross the wind shell $\tau_{cross}$ is similar to the time scale for the reverse shock to sweep the power-law density profile $\tau_{bend}$. Hence the SN shock crosses the wind shell. At late times SN shock produces another shell in the ambient medium so that we have a SNR with double shell structure. From the numerical results of the remaining models, we have found that when $\tau_{cross}/\tau_{bend}\leq2$, or equivalently when $\alpha\leq50$, the SNRs produced inside wind bubbles have double shell structure. Otherwise, either the SN shock does not cross the wind shell or even if it crosses at one time, the reverse shock reflected at the center accelerates the wind shell to merge into the SN shock Our results confirm the conclusion of Tenorio-Tagle et a1(1990).

• Journal of Korean Academy of Nursing Administration
• /
• v.7 no.1
• /
• pp.97-110
• /
• 2001

An image exists in the thought of every subjective person and it exercises its influence over everything, having a great power in the real world. An positive image of the nurse has an influence on her faith, value and confidence, therefore increasing her job satisfaction, helping to upgrade her level of profession of nursing through qualitative nursing service as a result, considering the necessity of such an image when it comes to improvement of the profession, the confirmation of the image is indispensable to its evaluation of a speciality in nursing. This study is intended to help that improvement of the nursing profession in the present so that the total effort in every field of nursing is made and to offer basic material for developing a strategy to improve the image of nurses. This study is designed to investigate such an image descriptively. The subjects include 105 nurses, 60 doctors, 68 office workers, 88 medical engineers, 127 patients and there protectors with a total of 448 adapted with accidental sampling, who work at Y and W general hospital in Chonju. The measuring instrument consists of 40 question, with the researcher amended and made from on of Inja Song(1993), Donsoon Lee(1995), Ilsim yang(1998), and its Cronbach's alpha coefficient is .95. Data were collected from March 1 2000 to March 20, 2000 using self-reported questionnairs, analyzed with SPSS WIN 7.5 after encoding. The results are as follows: 1. Most of the subjects thinks the nursing as a hard, stressful, always busy job(more than 75%), and consider nurses as good-looking, supportive and responsible to co-workers to above average degree($50.0{\sim}74.9%$), especially it shows the idea that nursing is independently academic job and has come to fasten itself upon the public. But it shows below the everage($25.0%{\sim}49.9%$) in regard to self development as a specialist, affection for there job, an association activity, service to the community, high intelligence level and direct given patient nursing service. It also rated low as a recommendable job, independently nursing accomplishment, social position. 2. The nurses, patients and there protectors expressed more positive opinions than doctors, medical engineers, office workers about the image of the nurse(F=18.80, p=.00). This fact indicates that the former group evaluated the image similarly contrary to lowness of the latter. 3. In the study on what influenced upon the image, it defines to 79.8% by direct contact in the hospital or acquaintance with nurses, and 16.3% by mass media. 67.3% answered that they saw the image in a new light through hospitalization, which suggests an important source for the image management originates from caring for the quality of nursing service. Considering the evaluation of the image above, we need strategies to lead a unique professional knowledge and technological development, insurance of professional self-determination, high social position, participation in group activities, dedication to lifetime job, in order that nursing comes to expand as a professional occupation. Also, as for generating more positive images, we must take the quality of nursing service into account and offer and monitor correct information about the expanded role and function of the nurse continuously so that mass media reflect a more accurate image of nurses in general.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.7
• /
• pp.777-782
• /
• 2011

Micro features on the surface are well-known to have significant effects on optical or mechanical properties such as the optical interference, reflectance at the surface, contact angle, interfacial friction, etc. These surface micro features are increasingly employed to enhance the functionality of the applications in various application areas such as optical components for LCD or solar panel. Diverse surface features have been proposed and some of them are showing excellent efficiency or functionality, especially in optical applications. Most applications employing the micro features need manufacturing process for mass production and the injection molding and roll-to-roll forming, which are typical processes for mass production adopting polymeric materials, may be also preferred for micro patterned plastic product. Since the functionality or efficiency of the surface structures generally depends on the shape and the size of the structure itself or the array of the structures on the surface, it would be very important to replicate the features very precisely as being designed during the molding the micro pattern applications. In this paper, a series of research activities is introduced for roll-to-roll forming of micro patterned film including filling of patterns with UV curable resin, demolding of surface structures from the roll tool, control of surface energy and cure shrinkage of resin and dispose time and intensity of the UV light for curing of UV curable resin.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.692-696
• /
• 2017

The shape of press components is becoming increasingly complex due to customer demands, process shortening and cost savings. In addition, the stability of the pressing process frequently varies during mass production due to the influence of many factors. In order to ensure the process stability, it is necessary to establish a process in which reproducibility is realized in tolerance, which is sufficient for advance study of shape, material, press, mold and lubrication. However, unforeseen changes in process parameters cause disruptions in production line shutdowns and production planning. In this paper, we introduce a method to monitor a real time process by applying a sensor to a press mold. A non-contact type sensor for measuring the flow of a sheet material and an example of an experiment using the optical sensor which is highly applicable to mass production are presented. An optical sensor was installed in a cylindrical drawing mold to test its potential application while changing the material, blank holder force, and drawing ratio. We also quantitatively determined that the flow of other sheet materials was quantified locally using a square drawing die and that the measured value was always smaller than the drawing depth due to the material elongation. Finally, we propose a field that can be used by attaching the sensor to the press mold. We hope that the consequent cost reduction will contribute to increasing global mold competitiveness.

• Analytical Science and Technology
• /
• v.14 no.5
• /
• pp.451-457
• /
• 2001

Because liquids with high molecular weight such as mineral oil have low vapor pressure at room temperature, it is generally thought to be difficult to lose them to evaporation. However, when they are dispersed into air in small droplets during application in machining processes, their surface area becomes considerably higher. To determine the potential for metalworking fluids (MWF) filter losses, MWF mist was generated and collected on polyvinyl chloride (PVC) filters in test chamber. After collected MWF was exposed to clean air during designated period (range 10~240 minutes) and the filters were desiccated, losses were evaluated. As duration of clean air passing through PVC filter increased, loss of MWF gradually increased. MWF lost after 10 minutes ranged form 12.4 % to 21.8 % of the original loading mass, on average 53.3 % of the total loss. These results indicate that significant mass of MWF collected on PVC filters can be lost at the beginning of air sampling. Loss of MWF collected on PVC filter also occurred during desiccation without active airflow. In multiple regression to identify which factors influence the loss of MWF collected on PVC filter, both duration of air passing through PVC filter and MWF age (fresh vs. used) were significant predictor (p=0.0001). Therefore, workers' exposure to MWF measured method 0500, may underestimate true concentration. Further study is needed to develop a new method to quantify the workers' exposure to airborne MWF mist accurately.

• Journal of Soil and Groundwater Environment
• /
• v.14 no.6
• /
• pp.87-94
• /
• 2009

Surfactant-enhanced air sparging (SEAS) was developed to suppress the surface tension of groundwater prior to air sparging resulting in higher air saturation and larger contact area between NAPL and gas during air sparging. Larger contacting interface between NAPL and gas means faster mass transfer of contaminants from NAPL to gas phase. This new technique, however, is limited to relatively volatile contaminants because vaporization is its basic mechanism of mass transfer. In this study, SEAS was tested at an elevated temperature for a semi-volatile n-decane, which is expected not to be a good candidate of SEAS application due to its low vapor pressure at ambient temperature. Three sparging experiments were conducted using 1-dimensional column (5 cm id, 80 cm length) packed with sand; (1) ambient temperature ($23^{\circ}C$), column saturated with distilled water, (2) SEAS at ambient temperature ($23^{\circ}C$), for n-decane contaminated sand, (3) SEAS at elevated temperature ($73^{\circ}C$), for n-decane contaminated sand. Higher air saturation was achieved by SEAS compared to that by air sparging without surfactant application. The n-decane removal efficiency of SEAS at elevated temperature was significantly higher(> 10 times) than that of ambient SEAS. The n-decane concentrations in the gas effluent from column during SEAS at $73^{\circ}C$ are found to be 10 times of those measured at ambient temperature. Thus, SEAS technique can be applied for removal of semi-volatile contaminants provided that an appropriate technique for elevating aquifer temperature is available.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.5 no.3
• /
• pp.127-136
• /
• 1985

A simplified single degree of freedom analog with mass-spring-dashpot is proposed in this study. The simplified analog can describe the dynamic behavior of a rigid circular footings whose contact pressures are parabolic. The analog proposed in this study shows remarkable agreement when compared with the elastic half-space theory the analog is also compared with vertical vibration test results of model concrete footings. For the vibration experiments, 11 circular footings with different mass ratio are constructed. The elastic half-space is represented by compacted sand layer. A constant force excitation vibrator is used for the dynamic loading. The frequency range for vibration tests is 30 to 100 Hz. From the dynamic experiments, it is found that the measured resonant frequencies agree very well with the analog results, however, the ratio of theoretical and measured resonant amplitudes vary between 0.5 and 1.7. It is also found that, when the dynamic force is increased, the resonant frequency is decreased slightly and the resonant amplitude is increased slightly.

• Journal of Sensor Science and Technology
• /
• v.8 no.3
• /
• pp.283-290
• /
• 1999

The $n^+/p/p^+$ junction PERL solar cell of $0.1{\sim}2{\Omega}{\cdot}cm$ (100) p type silicon wafer was fabricated through the following steps; that is, wafer cutting, inverted pyramidally textured surfaces etching by KOH, phosphorus and boron diffusion, anti-reflection coating, grid formation and contact annealing. At this time, the optical characteristics of device surface and the efficiency of doping concentration for resistivity were investigated. And diffusion depth and doping concentration for n+ doping were simulated by silvaco program. Then their results were compared with measured results. Under the illumination of AM (air mass)1.5, $100\;mW/cm^2$ $I_{sc}$, $V_{oc}$, fill factor and the conversion efficiency were 43mA, 0.6 V, 0.62. and 16% respectively.

• Journal of The Geomorphological Association of Korea
• /
• v.19 no.2
• /
• pp.51-68
• /
• 2012

This paper aims to investigate the value in culture, history and ecology of the Mt. Palgong. It attempts to build the strategy for making use of The Mt. Palgong by literature survey, interview, and field survey. The main results are as follows: 1) The boundary of physical geography of the Mt. Palgong is classified into two. The boundary of the Mt. Palgong limits to granite mass block in a narrow sense, while in a broad sense, the boundary of the Mt. Palgong includes a contact aureole to be bordered on the Mt. Palgong granite mass block. The boundary from a cultural viewpoint limits to Daegu city(excluding Dalseong county) and Gyeongsan city, Yeongcheon city, Gunwi county and Chilgok (Dongmyeong-myeon, Giseong-myeon) in Gyeongbuk province. 2) In the geological boundary, one of the south-west slope is clearer than that of the north-east slope of the Mt. Palgong. The landforms such as tor, sheeting joint and gutter are well developed as a whole. Mountain landform such as boulder stream, polygonal cracking is relatively well developed on the south-west slope, while river landform is relatively well developed on the north-east slope of the Mt. Palgong. 3) It is necessary to develope various masterpiece of interesting stories related to Mt. Palgong in order to make the Mt. Palgong excellent tour complex. 4) It is desirable to designate the Mt. Palgong as a national park for systematic management. A master plan should be ultimately designed to raise brand value of Daegu city, and make good identity of the city by restoring 'The Mt. Palgong Jecheondan' and registering 'Gatbawi' as world heritage. 5) It is reasonable that the method of development in The Mt. Palgong should be based on the pattern of 'slow life town'. 'The Mt. Palgong museum' will then be designed to give visitors all the informations on The Mt. Palgong.

• Clean Technology
• /
• v.16 no.3
• /
• pp.191-197
• /
• 2010

Repair reaction of plasma damaged porous methyl doped SiOCH films was carried out with silylation agents dissolved in supercritical carbon dioxide ($scCO_2$) at various reaction time, pressure, and temperature. While a decrease in the characteristic bands at $3150{\sim}3560cm^{-1}$ was detectable, the difference of methyl peaks was not identified apparently in the FT-IR spectra. The surface hydrophobicity was rapidly recovered by the silylation. In order to induce effective repair in bulk phase, the wafer was heat treated before reaction under vacuum or ambient condition. The contact angle was slightly increased after the treatment and completely recovered after the subsequent silylation. Methyl groups were decreased after the plasma damage, but their recovery was not identified apparently from the FT-IR, spectroscopic ellipsometry, and secondary ion mass spectroscopy analyses. Furthermore, Ti evaporator was performed in a vacuum chamber to evaluate the pore sealing effect. The GDS analysis revealed that the open pores in the plasma damaged films were efficiently sealed with the silylation in $scCO_2$.