• 한국전산구조공학회논문집
• /
• 제22권5호
• /
• pp.439-444
• /
• 2009

본 논문에서는 경계요소법의 평면 접촉해석에 사용될 수 있는 효율적인 접촉면 검출 알고리즘을 제시하였다. 접촉면 검출 알고리즘을 경계요소법에 적용하기 위하여, 경계요소법이 가지는 자료구조를 분석하였다. 경계요소법의 특징 중 하나인 모퉁이 문제를 고려하여 전역검색, 지역검색, 접촉관계식 설정의 3단계로 접촉면 검출기법을 구현하였다. 전역검색은 접촉 주요소, 부요소 개념을 도입하였으며, 지역검색에 있어서는 공간분할기법인 사지트리를 이용하였다. 접촉관계식의 설정을 위하여 요소수준에서 절점의 접촉여부를 검토하고 최종계의 방정식에 구속조건을 할당하도록 하였다. 제시된 알고리즘을 이용한 프로그램의 정확성과 효율성을 입증하기 위하여 수치해석을 실시하여 결과를 비교하였다.

• 비파괴검사학회지
• /
• 제30권3호
• /
• pp.282-289
• /
• 2010

Most nondestructive testing techniques require good contact between the sensor and tested concrete surface to obtain reliable data. But the surface preparation is often very time and labor consuming due to the rough surface or limited access of concrete structures. One approach to speed up the data collection process is to eliminate the need for physical contact between the sensor and tested structure. Non-contact air-coupled sensing technique can be a good solution to this problem. An obvious advantage of the non-contact air-coupled sensing technique is which can greatly speed up the data collection in field and thus the damage detection process can be completed very rapidly. In this article, recent developments in non-contact air-coupled sensing technique for rapid detection of damages in concrete structures are summarized to evoke interest, discussion and further developments on this technique to a NDT research community in Korea. It is worth noting that the works in this article have been published in the types of thesis, proceedings, and journals. All published sources are cited in the text and listed in reference.

• International Journal of Precision Engineering and Manufacturing
• /
• 제8권1호
• /
• pp.52-58
• /
• 2007

We propose a new contact detection algorithm for fine pitch wire bonding. Fast and stable contact detection of the z-axis in wire bonding is extremely important to maintain the quality of fine pitch gold wire bonding processes, which use a small pad less than $70{\mu}m$ in diameter. A small perturbation in the contact detection time causes a large difference in the size of the formed squashed ball. The new detection method is based on a statistical approach and designed for a discrete Kalman filter. It is faster and has smaller detection time variations than conventional detection methods. Experimental results are presented to demonstrate the advantages of the proposed algorithm.

• 전기학회논문지
• /
• 제62권12호
• /
• pp.1803-1808
• /
• 2013

To maintain contact between catenary and pantograph copper is important in order to transmit power smoothly on Current collection system. But, Arc discharge with strong light is generated because of contact loss. Therefore, Arc discharge detection is important measurement factor judging performance of current collection system. In this paper, It is described to results of arc discharge applying UV detection technology using arc generator. And Arc discharge was detected using the most commonly used processing catenary and rigid catenary and pantograph copper of electric rolling stock for securing arc detection instrument reliability. Results of contact loss detection instrument in this paper will be used for maintenance of current collection quality and system.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.617-625
• /
• 2012

Non-contact detection of internal defects in a rail using ultrasonic waves is discussed in this paper. Cracks in a rail may be a cause of a serious railway accident such as derailment if left undetected. Concurrent rail inspection method based on ultrasonic testing using piezoelectric transducers has several limitations as it should keep physical contact with the rail. This work suggests a non-contact detection of internal defects in a rail using ElectroMagnetic Acoustic Transducers (EMAT) which can produce and measure ultrasonic waves in a rail without any couplant. The EMATs for rail inspection are designed and fabricated and their working performance is verified through a series of experiments on various types of internal defects in test rails. The effect of lift-off between the transducers and the rail on the generated signals is also discussed.

• 한국화재소방학회논문지
• /
• 제22권4호
• /
• pp.54-60
• /
• 2008

본 논문에서는 MCCB 및 단자대 접속부의 접촉불량에 의한 소손특성을 분석하였으며, 발열을 감지하여 화재를 예방할 수 있는 다양한 기법들을 제시하였다. 첫째로, 열전대를 사용하는 방법과 적외선 열화상기를 사용하여 접촉불량 등의 원인에 의해서 발열을 감지하는 방법을 분석하였다. 또한, 접촉불량 발생시 변색여부로 쉽게 이상유무 판단이 가능한 서모캡의 특성을 분석하였으며, 공간 등의 제약을 덜 받으면서 접속부위에 상시 설치하고 감시할 수 있는 방식인 향 캡슐과 향 검지기를 사용하여 과열을 감지하는 시스템의 원리 및 특징을 분석하였다. 마지막으로, 가융합금의 용융특성을 응용한 접촉불량 감지나사를 제작하여 단자대에 적용 및 실험하여 성능을 검증하였다. 상기 제시된 기법들을 적절히 적용된다면 MCCB 및 단자대등의 접속부의 접촉불량에 의한 전기화재 예방에 기여할 수 있을 것으로 기대된다.

• 한국정밀공학회지
• /
• 제20권12호
• /
• pp.148-158
• /
• 2003

In this paper, efficient and accurate contact search algorithm is proposed for the contact problems by the finite element method. A slave node and a maser contact segment is defined using the side of a finite element on the contact surface. The specific goal is to develop techniques of reducing the nonsmoothness of the contact interactions arising from the finite element discretization of the contact surface. Contact detection is accomplished by monitoring the territory of the slave nodes throughout the calculation for possible penetration of a master surface. To establish the validity of the proposed algorithm, some different process and geometries examples were simulated. Efforts are focused on the error rate that is based on the penetrated area through the simulations fur large deformation with contact surface between deformable bodies. A proposed algorithm offers improvements in contact detection from the simulation results.

• 한국화재소방학회논문지
• /
• 제26권6호
• /
• pp.24-30
• /
• 2012

본 연구는 저압 선로의 접촉 부분에서 발생할 수 있는 접촉 불량과 그 부분의 진동이 결합될 경우 발생될 수 있는 불꽃 및 직렬 아크를 검출할 수 있는 방법에 대한 것이다. 일반적으로 전기화재의 원인은 과전류, 단락, 접촉불량 등 여러 가지가 있을 수 있다. 이 중 과전류 및 단락 등은 선로에 흐르는 순간 전류량을 검출하여 감지할 수 있으나, 접촉불량은 전압, 전류값의 초과분 및 파형의 왜곡으로는 검출하기가 어려운 점이 있다. 따라서 본 논문에서는 퍼지논리 및 다차원 기법을 이용하여 최적의 아크 판단 기법을 연구하고, 아크 검출 및 검증을 위한 모의실험과 제어기 실험 및 부하실험을 실시하였다. 그 결과 제어기 및 검출 알고리즘이 여러 가지 부하와 상관없이 정상적인 부하의 파형과 아크 발생시의 파형을 구분하여 성공적으로 직렬아크를 검출하였다.

• 한국공작기계학회논문집
• /
• 제14권4호
• /
• pp.49-54
• /
• 2005

Measuring defects on the inside and on the surface of a steel structure is very important technology in order to predict the life span of the structure. In particular, a place with a high probability that it may contain defects is a welded part and it is very important to check defects in the part, absence/presence of non-uniform substances, its shape, and the location. Many non-destructive tests can be applied, but the ultrasonic flow detection test is widely used with some advantages. The ultrasonic flow detection test, however, cannot be applied when there is a problem by a contact medium between PZT and a specimen, in case of a small and complicated shape or a moving object or when the specimen is hot. In this study, to solve the problems of the contact ultrasonic flow detection test, the non-contact ultrasonic flow detection test for sending/receiving ultrasonic waves using lasers was described. I intended to develop a non-destructive detection system applying the laser application ultrasonic test to a steel structure by detecting the defects inside of and on the surface of the specimen.

• 대한기계학회논문집A
• /
• 제26권8호
• /
• pp.1599-1607
• /
• 2002

The purpose of this work is to suggest a new non-contact damage detection method for rotating ferromagnetic shafts. The presence and the location of a damage in rotating shafts are assessed by means of longitudinal elastic waves propagating along the shafts. These waves are measured by non-contact magnetostrictive sensors consisting of a coil and bias magnets. This paper shows the effectiveness of the sensors in the damage detection of rotating shafts. Several issues occurring in the application of the sensors to rotating shafts are carefully investigated.